EP-HGA.ES-8C76 Highest-Output Automatic PET Blow Molding Machine — 700ml, 8 Cavity, Water & Beverage Bottles

~12,000 bph — Maximum Single-Machine ES Output

At approximately 12,000 bottles per hour, the ES-8C76 delivers the highest output achievable from a single standard ES automatic RSBM machine. This output level — approximately 96 million bottles per year at 8,000 operating hours — corresponds to the production scale of established regional water brands and national beverage operations whose production volume at single-machine level requires the highest-cavity ES configuration available.

Water & Beverage Dedicated Production

The ES-8C76 is positioned as a dedicated water and beverage production machine — its primary application is high-volume narrow-format water and beverage bottles in the 200ml–700ml range. The 8-cavity configuration at this output level is matched to the production economics of FMCG water and beverage operations where per-bottle cost reduction through maximum throughput is the dominant investment driver. Chemical and pesticide bottle production at 8-cavity scale is also within the machine’s dimensional envelope.

Automated Line Integration Required

At ~12,000 bph, the ES-8C76 requires full automated line integration — automated preform sorter and feeder, bottle discharge conveyors, inline leak tester, and downstream packing or filling automation. At this output rate, preform consumption is approximately 200 per minute; manual preform loading is not viable for sustained production. The ES-8C76 is a line-level investment, not a standalone machine installation.

8-Cavity Servo Precision & Heating

Eight internationally sourced servo motors with coordinated digital PLC management operate the clamping and stretch stations across all eight cavities simultaneously. The extended 8-cavity infrared heating array must maintain uniform temperature profiles across all eight preform positions per cycle — the heating array length, heating section count, and zone-by-zone calibration requirements are more demanding than any smaller-cavity ES configuration. Commissioning calibration for 8-cavity weight consistency is conducted by Ever Power’s commissioning engineers as part of the formal installation sign-off.

Food-Grade Water & Beverage Compliance

PET produced on the ES-8C76 using approved food-grade PET resin meets FDA 21 CFR and EU 10/2011 food-contact compliance for water and beverage applications. The zero hand-contact production cycle satisfies bottled water production hygiene requirements in major regulatory markets globally. For water production lines requiring specific fill and pack compliance documentation, our engineering team can advise on the machine’s validation documentation package.

ES-8C76 vs ES-6C76: The Step-Up Decision

The ES-8C76 adds approximately 30% output over the ES-6C76 at 9,200 bph — from approximately 74 million to 96 million annual bottles per machine. For buyers whose annual production target at 700ml water or beverage format falls between 74 million and 96 million units, the ES-8C76 provides the step-up without requiring a second machine installation. Below 80 million units annually, the ES-6C76 is typically more capital-efficient for the production volume; above 80 million, the ES-8C76’s output-per-installation advantage justifies the higher investment.

طلب: 330ml, 500ml, and 700ml PET water bottles for a Vietnamese national bottled water brand distributing through retail, food service, and export channels across Vietnam and southern China.

تم حل المشكلة: The brand’s production expansion to serve a new Chinese export contract required an additional 40 million bottles per year beyond their ES-6C76 capacity. Adding a second ES-6C76 would have required doubling machine count, floor space, and utility connections. The ES-8C76 provided the additional 22 million annual bottle capacity beyond the ES-6C76 in a single machine footprint, partially meeting the export requirement with one new installation.

“Export needed 40 million more bottles. The ES-8C76 gave us 22 million more per machine versus the ES-6C76. One machine, one footprint — the best single-machine output step we could make.”

طلب: 300ml, 500ml, and 600ml PET water and juice bottles for a Nairobi-based beverage manufacturer serving national retail, food service, and institutional channels across Kenya and Uganda.

تم حل المشكلة: The manufacturer needed to consolidate production from three separate 4-cavity machines — each covering a different SKU size — into fewer installations while increasing total output for the Uganda export channel. The ES-8C76 produced all three sizes from one machine (via mold changeover scheduling) at approximately the combined output of two of the three previous machines, reducing machine count by one while increasing per-machine output.

“Three 4-cavity machines, three SKUs, fragmented production. The ES-8C76 consolidated two of the three machines into one at higher combined output. Fewer machines, more output, one less installation to maintain.”

طلب: 250ml, 500ml, and 700ml PET pesticide and herbicide bottles for a Jakarta-based agrochemical packaging company serving registered pesticide brands across Indonesia with annual volumes exceeding 90 million bottles.

تم حل المشكلة: The company’s annual volume at narrow-format pesticide bottle specifications exceeded what two ES-6C76 machines could produce within their facility’s current footprint and utility capacity. The ES-8C76 at ~96 million annual units from one machine footprint replaced a planned second ES-6C76 installation — serving the full 90-million-unit annual requirement from one machine within the existing facility, without the facility expansion the second machine would have required.

“90 million bottles, one facility, no expansion budget. The ES-8C76 fit the annual volume into one machine footprint. That’s what maximum output per installation means — and that’s why we specified the 8-cavity.”