✉ [email protected]
✔ Certificação CE · Fabricante direto da fábrica
★ Solicite um orçamento
EP-HGJ-CL Preform Heater — Mold Height 160mm, Neck Diameter 68mm

EP-HGJ-CL Preform Heater — Mold Height 160mm, Neck Diameter 68mm

Standard preform heater for semi-automatic narrow-neck bottle production lines. Neck diameter up to 68mm, mold height 160mm, 200–2,100 bph. Higher capacity and more versatile than HGJ-B. Required component for all HGS semi-automatic machines producing standard narrow-neck bottles. Requires three-phase power supply.

SKU: EP-HGJ-CL Categorias: , Tags: , , ,

Descrição

Standard Preform Heater · Neck Dia. ≤68mm · Mold Height 160mm · 200–2100 bph · Semi-Auto Line Component

EP-HGJ-CL Standard Preform Heater

Standard preform heater for semi-automatic blow molding lines producing narrow-neck bottles — neck diameter up to 68mm, mold height 160mm, 200–2,100 bph. The higher-capacity and more versatile of the two HGJ heater models, covering standard bottle production across all industries at the widest output range in the HGJ series.

HGJ-CL vs HGJ-B — Standard vs Wide-Mouth

Parâmetro HGJ-CL ← This Heater HGJ-B
Aplicativo Standard narrow-neck bottles Potes de boca larga
Max. Neck Diameter 68mm 130/65mm
Output 200–2,100 bph 500–1,200 bph
Preform Holder Positions 96 18/36
Peso da máquina 250 kg 400 kg

The HGJ-CL’s 96 preform holder positions (vs HGJ-B’s 18/36) enable its higher maximum output of 2,100 bph — more than 75% higher capacity than the HGJ-B. For standard narrow-neck bottle production at higher output rates, the HGJ-CL is the appropriate heater.

EP-HGJ-CL standard preform heater semi-automatic blow molding line neck diameter 68mm 200-2100 bph mold height 160mm

Machine Overview

O EP-HGJ-CL is the standard preform heater for semi-automatic blow molding lines producing narrow-neck bottles up to 68mm neck diameter. With 96 preform holder positions and a rated output of 200–2,100 bph, it is the higher-capacity and more versatile of the two HGJ heater models — lighter at 250kg and smaller (1,500×600×1,100mm) than the HGJ-B, while offering a significantly wider output range.

The HGJ-CL operates on three-phase, four-wire power supply at 5–8kW — the same electrical specification as the HGJ-B, independent of the single-phase HGS blow machine it is paired with. Its 200–2,100 bph output range covers the full output spectrum of all HGS semi-automatic blow machines at standard narrow-neck bottle specifications.

For wide-mouth jar applications where neck diameter exceeds 68mm, the EP-HGJ-B is the correct heater. Browse all semi-automatic machines and heaters.

Technical Specifications

Complete Specifications — EP-HGJ-CL
Parâmetro Unit Value
Power Supply — Three-phase, four-wire
Output (Efficiency) bph 200–2,100
Using Power kW 5–8
Preform Wall Thickness mm 2.5–4.2
Preform Holder Positions — 96
Max. Neck Diameter mm 68
Mold Height mm 160
Dimensões da máquina (C×L×A) mm 1,500 × 600 × 1,100
Peso da máquina kg 250

⚠️ Note: The HGJ-CL requires three-phase, four-wire power supply — unlike the HGS blow machines which use single-phase 220V. Confirm your facility electrical supply before ordering. Request the full datasheet.

Perguntas frequentes

Why does the HGJ-CL have higher output than the HGJ-B at the same power? +
96 preform holder positions vs HGJ-B’s 18/36. More positions in the heating carousel = more preforms heated simultaneously = higher throughput at the same power and cycle time. HGJ-B has fewer positions because wide-mouth jar preforms are physically larger.
Can the HGJ-CL handle preforms for larger containers like 5L or 10L? +
Yes, provided neck diameter ≤ 68mm and wall thickness within 2.5–4.2mm. At 5L/10L scale, preforms are significantly heavier and longer — confirm preform length fits within mold height (160mm) and wall thickness/weight are within the rated range.
What is the correct output matching between HGJ-CL and an HGS blow machine? +
HGJ-CL output must equal or exceed the HGS machine’s output rate at your bottle size. The 200–2,100 bph range covers all HGS machines. Actual output at your preform weight and wall thickness may vary — confirm before finalising the pairing.
Is the HGJ-CL suitable for hot-fill preforms used with the HGS200B? +
Yes — the heater is not application-specific. Hot-fill preforms typically have the same physical dimensions as standard cold-fill preforms at the same volume; the difference is resin grade, not physical dimensions. Confirm your hot-fill preform specification falls within the HGJ-CL’s rated parameters.
How many HGJ-CL heaters do I need for my production line? +
One HGJ-CL per HGS blow machine is the standard pairing, provided the heater’s output matches the blow machine’s rate. Multiple HGS machines running simultaneously each require a separate heater — or a multi-machine line engineering assessment. Contact our team for multi-machine configuration advice.

Enquire About the EP-HGJ-CL

For standard narrow-neck bottle semi-automatic lines — required alongside your HGS blow molding machine. Share your bottle’s neck diameter, preform wall thickness, and target production rate for a heater pairing confirmation. For wide-mouth jar applications, see the EP-HGJ-B.

Produtos relacionados