{"id":428,"date":"2026-07-22T08:23:29","date_gmt":"2026-07-22T08:23:29","guid":{"rendered":"https:\/\/onestepblowmoldingmachine.com\/product\/replacement-of-jomar-ibm85s-injection-blow-molding-machine-ep-zq80\/"},"modified":"2026-07-22T08:23:39","modified_gmt":"2026-07-22T08:23:39","slug":"replacement-of-jomar-ibm85s-injection-blow-molding-machine-ep-zq80","status":"publish","type":"product","link":"https:\/\/onestepblowmoldingmachine.com\/ru\/product\/replacement-of-jomar-ibm85s-injection-blow-molding-machine-ep-zq80\/","title":{"rendered":"Replacement of Jomar IBM85S Injection Blow Molding Machine – EP-ZQ80"},"content":{"rendered":"
\n

European-Style Injection Blow Molding \u2014 80 Tonne Class<\/p>\n

High-Output IBM Machine with Precision Angle Divider and Dual Hydraulic System<\/h2>\n

The EP-ZQ80 sits in the same tonnage class as the Jomar IBM85S \u2014 cited here only to assist buyers in comparing specifications \u2014 with a 55 mm screw, 800 kN clamping force and up to 20 cavities at 10 ml for high-volume bottle production.<\/p>\n

\n Get a Quote<\/a>
\n View All IBM Machines<\/a>\n <\/div>\n<\/div>\n

EP-ZQ80 vs Jomar IBM85S \u2014 Specification Comparison<\/h2>\n

The Jomar IBM85S is a well-known 80-tonne class machine used widely in pharmaceutical and personal care packaging. The EP-ZQ80 is an independently engineered alternative in the same capacity class. The table below compares published specifications side by side. Jomar IBM85S data is sourced from publicly available materials. Jomar is referenced solely to assist buyers in equipment selection and is not affiliated with Ever Power.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nJomar IBM85S<\/th>\nEver Power EP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Injection Clamping Force<\/td>\n680 kN<\/td>\n800 kN<\/td>\n<\/tr>\n
Screw Diameter<\/td>\n55 mm<\/td>\n55 mm<\/td>\n<\/tr>\n
Injection Weight<\/td>\n300 g<\/td>\n466 g<\/td>\n<\/tr>\n
Max Cavities \u2014 10 ml<\/td>\n\u2014<\/td>\n20<\/td>\n<\/tr>\n
Max Cavities \u2014 100 ml<\/td>\n\u2014<\/td>\n12<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\n3.33 x 1.94 x 3.41 m<\/td>\n4.5 x 1.6 x 2 m<\/td>\n<\/tr>\n
Dry Cycle<\/td>\n\u2014<\/td>\n4 s<\/td>\n<\/tr>\n
Total Power<\/td>\n\u2014<\/td>\n55 kW<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Jomar IBM85S reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.<\/p>\n

EP-ZQ80 Full Technical Specifications<\/h2>\n

The EP-ZQ80 is the first model in the Ever Power ZQ series to feature a standard high-precision angle divider, enabling synchronised mold-open and turret-lift operation for improved cycle stability at higher cavity counts. With a single 55 mm screw and 466 g injection weight it handles larger preforms, and with 800 kN injection clamping force it delivers the highest output in its tonnage class. Explore the wider range at the IBM machines overview<\/a>.<\/p>\n

Injection System<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nUnit<\/th>\nEP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Screw Diameter<\/td>\nmm<\/td>\n55<\/td>\n<\/tr>\n
Screw L\/D Ratio<\/td>\n\u2014<\/td>\n22:1<\/td>\n<\/tr>\n
Injection Weight<\/td>\ng<\/td>\n466<\/td>\n<\/tr>\n
Heating Power<\/td>\nkW<\/td>\n11<\/td>\n<\/tr>\n
Number of Barrel Zones<\/td>\n\u2014<\/td>\n4+N<\/td>\n<\/tr>\n
Injection Stroke<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Clamping System<\/h3>\n
\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nUnit<\/th>\nEP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Injection Clamping Force<\/td>\nkN<\/td>\n800<\/td>\n<\/tr>\n
Injection Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Blow Clamping Force<\/td>\nkN<\/td>\n120<\/td>\n<\/tr>\n
Blow Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Rotary Table Lift Height<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Mould<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nUnit<\/th>\nEP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Max Platen Size (L x W)<\/td>\nmm<\/td>\n800 x 400<\/td>\n<\/tr>\n
Mold Thickness<\/td>\nmm<\/td>\n280<\/td>\n<\/tr>\n
Max Bottle Diameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Max Bottle Height<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Max Bottle Volume<\/td>\nml<\/td>\n1 to 2000<\/td>\n<\/tr>\n
Stripping Stroke<\/td>\nmm<\/td>\n230<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Hydraulic System and Utilities<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nUnit<\/th>\nEP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Hydraulic Pressure<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
Motor Power<\/td>\nkW<\/td>\n18.5 + 18.5<\/td>\n<\/tr>\n
Dry Cycle<\/td>\ns<\/td>\n4<\/td>\n<\/tr>\n
Total Power<\/td>\nkW<\/td>\n55<\/td>\n<\/tr>\n
Operating Power Ratio<\/td>\n%<\/td>\n52 to 70<\/td>\n<\/tr>\n
Min Air Pressure<\/td>\nMPa<\/td>\n0.8 to 1.2<\/td>\n<\/tr>\n
Compressed Air Capacity<\/td>\nm3\/min<\/td>\n0.8<\/td>\n<\/tr>\n
Cooling Water Flow<\/td>\nm3\/h<\/td>\n4<\/td>\n<\/tr>\n
Cooling Water Pressure<\/td>\nMPa<\/td>\n0.3 to 0.4<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\nm<\/td>\n4.5 x 1.6 x 2<\/td>\n<\/tr>\n
Net Weight<\/td>\nton<\/td>\n10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.<\/p>\n

Cavity Output by Bottle Volume<\/h2>\n

The EP-ZQ80 delivers the highest cavity counts in its class across all volume sizes. At 60 ml it runs 14 cavities per cycle, ideal for high-volume personal care and healthcare bottle lines. At 500 ml it supports 5 to 6 cavities, well-suited to cleaning agent and conditioner bottle production.<\/p>\n

\n\n\n\n\n\n
Volume<\/th>\n10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
Max Cavities<\/td>\n20<\/td>\n18<\/td>\n14<\/td>\n12<\/td>\n8<\/td>\n5-6<\/td>\n3-4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Actual cavity count depends on mold design and bottle geometry.<\/p>\n

\n \"pharmaceutical
\n \"personal
\n \"food\n<\/div>\n

Engineering Features of the EP-ZQ80<\/h2>\n
\n
\n

High-Precision Angle Divider<\/h3>\n

The EP-ZQ80 introduces the high-precision angle divider as a standard feature from this tonnage class upwards. It synchronises mold-open and turret-lift actions to the same precise moment, eliminating mechanical lag and improving dimensional consistency across high cavity counts.<\/p>\n<\/p><\/div>\n

\n

Standard Dual Hydraulic System<\/h3>\n

From the ZQ80 onwards, dual hydraulic circuits are standard equipment. Each circuit operates independently, allowing simultaneous actions and improving overall cycle efficiency. This design reduces energy consumption by 20 to 30% compared with single-circuit machines in the same class.<\/p>\n<\/p><\/div>\n

\n

800 kN Clamping \u2014 18% Above IBM85S Class<\/h3>\n

At 800 kN the EP-ZQ80 provides approximately 18% more injection clamping force than the 680 kN of the Jomar IBM85S class. The higher clamping force supports larger preform footprints and tighter tolerances for wide-neck bottle formats.<\/p>\n<\/p><\/div>\n

\n

466 g Injection Weight<\/h3>\n

At 466 g, the EP-ZQ80 injection weight is 55% higher than the 300 g of the IBM85S class, enabling heavier preforms for large-volume containers and wider bottle formats without the need to step up to a larger machine.<\/p>\n<\/p><\/div>\n

\n

800 x 400 mm Platen \u2014 Wider Mold Area<\/h3>\n

The 800 x 400 mm max platen size accommodates wider mold layouts compared with the 600 x 390 mm of the ZQ60, enabling 20-cavity configurations at 10 ml and 18-cavity at 30 ml for sustained high-output production.<\/p>\n<\/p><\/div>\n

\n

2 m Machine Height \u2014 Clean Room Compatible<\/h3>\n

At exactly 2 m, the EP-ZQ80 remains within standard industrial ceiling clearances and is compatible with pharmaceutical clean-room environments where overhead service runs and air handling systems often restrict available height.<\/p>\n<\/p><\/div>\n<\/div>\n

\n \"EP-ZQ80\n<\/div>\n

Internationally Sourced Components<\/h2>\n

The EP-ZQ80 shares the same international supply chain as the full ZQ series. Dual hydraulic circuits require precision sealing components \u2014 HALLITE O-rings and seal rings from England are specified for both circuits. Festo air valves from Germany and Gefran electronic rulers from Italy deliver consistent measurement and actuation performance across the higher-power configuration.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No.<\/th>\nComponent<\/th>\nSupplier<\/th>\nOrigin<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nComputer<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
2<\/td>\nOil Pump Servo Driver<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
3<\/td>\nServo Motor<\/td>\nFisi<\/td>\nItaly<\/td>\n<\/tr>\n
4<\/td>\nOil Pump<\/td>\nEkor<\/td>\nGermany<\/td>\n<\/tr>\n
5<\/td>\nHydraulic Valve<\/td>\nOil Research<\/td>\nTaiwan<\/td>\n<\/tr>\n
6<\/td>\nFive-Star Motor<\/td>\nStaver (Haitian)<\/td>\nChina<\/td>\n<\/tr>\n
7<\/td>\nElectronic Ruler<\/td>\nGefran<\/td>\nItaly<\/td>\n<\/tr>\n
8<\/td>\nA.C. Contactor<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
9<\/td>\nHeating Relay<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
10<\/td>\nO-Type Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
11<\/td>\nSeal Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
12<\/td>\nTravel Switch<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
13<\/td>\nAir Switch<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
14<\/td>\nOil Pipe<\/td>\nISR<\/td>\nUSA<\/td>\n<\/tr>\n
15<\/td>\nAir Valve<\/td>\nFesto<\/td>\nGermany<\/td>\n<\/tr>\n
16<\/td>\nServo Rotary Motor<\/td>\nHuichuan<\/td>\nChina<\/td>\n<\/tr>\n
17<\/td>\nPCS Carton<\/td>\nMecano<\/td>\nChina<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.<\/p>\n

Material Compatibility and Target Industries<\/h2>\n

The EP-ZQ80 processes the same full range of thermoplastics as the ZQ40 and ZQ60, with the increased injection weight particularly beneficial for HDPE and PP containers in the 250 to 2000 ml range. Its high cavity count at smaller volumes makes it a natural fit for contract manufacturers producing multiple SKUs on a single machine.<\/p>\n

\n

Processable Materials<\/h3>\n
\n HDPE<\/span>
\n LDPE<\/span>
\n PP<\/span>
\n PS<\/span>
\n ABS<\/span>
\n EVA<\/span>
\n PCTG<\/span>
\n PLA (Bio)<\/span>\n <\/div>\n<\/div>\n
\n
\n
💊<\/div>\n

Pharmaceutical<\/h3>\n

High-cavity vial lines, oral liquid bottles, tablet containers, wide-mouth jars<\/p>\n<\/p><\/div>\n

\n
🪴<\/div>\n

Personal Care<\/h3>\n

Shampoo, conditioner, body lotion, hand wash bottles in high volumes<\/p>\n<\/p><\/div>\n

\n
🍽️<\/div>\n

Food and Supplements<\/h3>\n

Protein powder jars, edible oil bottles, sports nutrition, condiment containers<\/p>\n<\/p><\/div>\n

\n
🧪<\/div>\n

Chemical and Industrial<\/h3>\n

Cleaning products, agrochemical containers, laboratory reagent bottles<\/p>\n<\/p><\/div>\n<\/div>\n

Mold Design for the EP-ZQ80<\/h2>\n

The wider 800 x 400 mm platen of the EP-ZQ80 enables multi-cavity mold layouts that are not achievable on smaller machines in the ZQ series. Injection mold bodies are machined from 4Cr13 stainless or imported S136 alloy steel. Blow mold bodies are available in magnesium-aluminium alloy for improved thermal performance at high cycle rates.<\/p>\n

\n \"blow
\n \"injection\n<\/div>\n
\n
\n

20-Cavity Mold Layout at 10 ml<\/h3>\n

The 800 x 400 mm platen supports up to 20 cavities at 10 ml \u2014 the highest count in the ZQ series at this volume \u2014 making the EP-ZQ80 the most productive option for pharmaceutical vial production within the 80-tonne class.<\/p>\n<\/p><\/div>\n

\n

Optimised Hot Runner for 4+N Zones<\/h3>\n

The 4+N barrel zone configuration provides finer melt temperature control across a wider range of materials, reducing thermal variation between cavities and improving weight consistency across all 20 positions.<\/p>\n<\/p><\/div>\n

\n

Zero Scrap at Full Cavity Count<\/h3>\n

The injection blow process produces no gate flash or parting-line waste at any cavity count. At 20 cavities running HDPE pharmaceutical vials, material savings versus extrusion blow molding are significant on a per-thousand-unit basis.<\/p>\n<\/p><\/div>\n<\/div>\n

Production Line Integration<\/h2>\n

The EP-ZQ80 is suited to high-throughput production lines where downstream filling, inspection and packing must match the machine output rate at 20 cavities. Ever Power offers complete turnkey line configuration advice including conveyor speed matching, inspection machine throughput and packing machine selection.<\/p>\n

\n \"EP-ZQ80\n<\/div>\n
\n \"auxiliary\n<\/div>\n
\n Screw Air Compressor<\/span>
\n Air Compressor<\/span>
\n Mold Temperature Controller<\/span>
\n Chiller<\/span>
\n Packing Machine<\/span>
\n Bottle Visual Inspection Machine<\/span>
\n Auto Loader<\/span>\n<\/div>\n

Technical Questions \u2014 EP-ZQ80<\/h2>\n
\n
\nHow does the EP-ZQ80 compare to the Jomar IBM85S in injection weight and clamping force?<\/summary>\n
The EP-ZQ80 provides 800 kN injection clamping force versus 680 kN for the Jomar IBM85S \u2014 approximately 18% higher. Injection weight is 466 g versus 300 g for the IBM85S, a difference of 55%. Both machines use a 55 mm screw diameter. The EP-ZQ80 also introduces a standard high-precision angle divider and dual hydraulic system not present in the smaller ZQ models.<\/div>\n<\/details>\n
\nWhat materials can the EP-ZQ80 process?<\/summary>\n
The EP-ZQ80 processes HDPE, LDPE, PP, PS, ABS, EVA, PCTG and bio-based PLA. Its higher injection weight of 466 g makes it particularly well-suited to HDPE and PP containers in the 250 to 2000 ml range, while the 4+N barrel zone configuration provides improved melt temperature control for engineering polymers.<\/div>\n<\/details>\n
\nWhat cavity counts does the EP-ZQ80 support?<\/summary>\n
The EP-ZQ80 supports up to 20 cavities at 10 ml, 18 at 30 ml, 14 at 60 ml, 12 at 100 ml, 8 at 250 ml, 5 to 6 at 500 ml and 3 to 4 at 1000 ml. These are the highest cavity counts available in the 80-tonne class of the ZQ range.<\/div>\n<\/details>\n
\nIs the EP-ZQ80 CE certified?<\/summary>\n
Yes. The EP-ZQ80 is CE marked in conformity with applicable European machinery safety and EMC directives. CE documentation is supplied with the machine and is available in advance on request for import compliance and procurement purposes.<\/div>\n<\/details>\n
\nWhat auxiliary equipment does the EP-ZQ80 require?<\/summary>\n
Due to its higher compressed air capacity of 0.8 m3\/min, a screw air compressor is recommended over a standard piston compressor for the EP-ZQ80. A chiller, mold temperature controller and auto loader are standard ancillaries. High-output downstream equipment \u2014 a bottle visual inspection machine rated for 20-cavity throughput and a matched packing machine \u2014 should be sized accordingly. Ever Power provides complete line proposals on request.<\/div>\n<\/details>\n<\/div>\n

Other IBM Machines in the EP-ZQ Series<\/h2>\n
\n <\/p>\n
EP-ZQ40<\/div>\n
40T \u2014 up to 9 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

EP-ZQ60<\/div>\n
60T \u2014 up to 14 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

EP-ZQ110<\/div>\n
110T \u2014 up to 24 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

EP-ZQ135<\/div>\n
135T \u2014 up to 30 cavities at 10 ml<\/div>\n

<\/a>\n<\/div>\n

\n

Exploring alternatives to the Jomar IBM85S?<\/h2>\n

Get in touch with our team for a detailed specification sheet and competitive quote.<\/p>\n

Contact Us<\/a>\n<\/div>\n