EP-HGA.ES-4C114 Automatic PET Blow Molding Machine — 1300ml, 4 Cavity, Cosmetic, Pharmaceutical & Beverage

3,300 bph at 4 Cavities

Four cavities at 114mm mold close delivering 3,300 bph — the standard mid-format 4-cavity output at this mold close level. The slight reduction versus the ES-4C76’s 4,800 bph reflects the extended cycle time at 1,300ml maximum volume versus 700ml. For mid-format dedicated line production, 3,300 bph is the appropriate output baseline at this container size tier.

94mm Body Diameter — Cosmetic Standard

At 94mm maximum body diameter, the ES-4C114 covers the standard dimensional ceiling for round cosmetic pump bottles in the 500ml–1,300ml segment — the most widely specified cosmetic bottle body diameter in the global personal care market. This dimensional specification makes the ES-4C114 the default 4-cavity selection for cosmetic manufacturers in this format range.

100-Position Preform Holder

The 100-position preform holder — the largest in the ES-4C series at the 114mm mold-close tier — ensures a deep preform buffer that sustains 4-cavity production without interruption at 1,300ml format. Larger preforms at this volume require a proportionally larger holder buffer to prevent cycle gaps during continuous high-output production runs.

88mm Maximum Neck Diameter

The 88mm maximum neck diameter accommodates the standard neck finish formats for cosmetic pump dispensers (38mm, 45mm), pharmaceutical wide-mouth syrups (38mm, 45mm), beverage containers (28mm PCO, 38mm screw), and chemical packaging (38mm, 45mm induction seal) — the full range of closure formats used across the industries this machine serves.

350/450mm Dual Stretching Stroke

The ES-4C114 supports both 350mm and 450mm stretching strokes — a dual-stroke capability that accommodates the range of container heights from compact 500ml cosmetic flacons to tall 1,300ml pharmaceutical syrups within the same machine configuration. The correct stroke setting is mold-specific and selected during recipe configuration for each bottle geometry.

Digital PLC Parameter Traceability

The PLC system logs all production parameters per batch — heating temperatures, pressure profiles, cycle count, and stretch timing — creating a parameter record that supports pharmaceutical batch documentation, cosmetic quality management systems, and regulatory audit requirements across the industries this machine serves from a single installation.

Cosmetic Pump Dispensers (500–1,300ml)

Full-size shampoo and conditioner pump bottles, body lotion dispensers, and personal care containers in the 500–1,300ml range at 94mm body diameter. The 3,300 bph output at this format is appropriate for FMCG cosmetic brands with annual production targets between 22 and 30 million bottles at this container size.

Pharmaceutical & Beverage (500–1,300ml)

Large-format pharmaceutical syrups, OTC supplement bottles, and standard beverage formats in the 500ml–1,300ml range. The 88mm maximum neck diameter covers pharmaceutical wide-mouth closure formats and standard beverage PCO and screw-cap finishes in this volume range.

Application: 500ml, 750ml, and 1,000ml PET cosmetic pump bottles for a Singapore-headquartered personal care brand distributing across Southeast Asia and Australia.

Problem solved: The brand was sourcing three bottle sizes from two separate suppliers in Malaysia and Thailand — creating profile inconsistency and extended supplier coordination overhead. Consolidating all three sizes in-house on the ES-4C114 reduced bottle unit cost by 21%, eliminated supplier lead time variability, and produced dimensionally consistent bottles across all three sizes from a single mold family.

“Two suppliers, two countries, inconsistent profiles. One machine, one mold family, consistent geometry across all three sizes. The brand consistency improvement was immediately visible in retail.”

Application: 500ml, 750ml, and 1,300ml PET pharmaceutical syrup and oral suspension bottles for an EU GMP-certified pharmaceutical manufacturer in Bucharest supplying Eastern European pharmacy chains.

Problem solved: The facility’s 2-cavity machine was a production bottleneck that limited their ability to supply a new contract with a Romanian hospital procurement network. The ES-4C114 at 3,300 bph provided the capacity uplift to accept the hospital contract while maintaining supply to existing pharmacy channel commitments — without the capital commitment of a 6-cavity machine that would have exceeded their contracted volume requirements.

“Hospital procurement contracts require guaranteed delivery volumes. We could not accept the contract on 2-cavity capacity. The ES-4C114 gave us the production certainty to sign.”

Application: 1,000ml and 1,300ml PET juice and functional beverage bottles for a Malaysian contract beverage packaging facility supplying domestic brands and an Australian export client.

Problem solved: The facility required a single machine capable of producing both their domestic 1,000ml juice format and the Australian client’s 1,300ml functional beverage format — two sizes that no single machine in their existing fleet could produce simultaneously. The ES-4C114’s 1,300ml maximum volume and 94mm body diameter covered both formats, enabling the facility to serve both clients from a single production line.

“1,000ml and 1,300ml from one machine. The Australian client’s format was what we couldn’t do before. Now we run both on the same line and the export contract is profitable.”