{"id":426,"date":"2026-07-22T08:23:29","date_gmt":"2026-07-22T08:23:29","guid":{"rendered":"https:\/\/onestepblowmoldingmachine.com\/product\/replacement-of-jomar-ibm40-injection-blow-molding-machine-ep-zq40\/"},"modified":"2026-07-22T08:23:32","modified_gmt":"2026-07-22T08:23:32","slug":"replacement-of-jomar-ibm40-injection-blow-molding-machine-ep-zq40","status":"publish","type":"product","link":"https:\/\/onestepblowmoldingmachine.com\/th\/product\/replacement-of-jomar-ibm40-injection-blow-molding-machine-ep-zq40\/","title":{"rendered":"Replacement of Jomar IBM40 Injection Blow Molding Machine – EP-ZQ40"},"content":{"rendered":"
\n

European-Style Injection Blow Molding \u2014 40 Tonne Class<\/p>\n

Compact High-Precision IBM Machine for Pharmaceutical and Cosmetic Packaging<\/h2>\n

An independently engineered machine in the same tonnage class as the Jomar IBM40 \u2014 cited here only to help buyers compare specifications \u2014 delivering higher clamping force and lower energy use through full European-style architecture.<\/p>\n

\n \u0e02\u0e2d\u0e43\u0e1a\u0e40\u0e2a\u0e19\u0e2d\u0e23\u0e32\u0e04\u0e32<\/a>
\n View All IBM Machines<\/a>\n <\/div>\n<\/div>\n
\n \"EP-ZQ40\n<\/div>\n

EP-ZQ40 vs Jomar IBM40 \u2014 Specification Comparison<\/h2>\n

Buyers evaluating 40-tonne class IBM machines frequently compare the Jomar IBM40 against alternatives from multiple manufacturers. The table below sets key parameters side by side for direct technical assessment. Jomar IBM40 figures are drawn from publicly available data. Jomar is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0e1e\u0e32\u0e23\u0e32\u0e21\u0e34\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/th>\nJomar IBM40<\/th>\nEver Power EP-ZQ40<\/th>\n<\/tr>\n<\/thead>\n
\u0e41\u0e23\u0e07\u0e22\u0e36\u0e14\u0e09\u0e35\u0e14<\/td>\n340 kN<\/td>\n400 kN<\/td>\n<\/tr>\n
\u0e40\u0e2a\u0e49\u0e19\u0e1c\u0e48\u0e32\u0e19\u0e28\u0e39\u0e19\u0e22\u0e4c\u0e01\u0e25\u0e32\u0e07\u0e02\u0e2d\u0e07\u0e2a\u0e01\u0e23\u0e39<\/td>\n35\/40 mm<\/td>\n40\/45 mm<\/td>\n<\/tr>\n
\u0e19\u0e49\u0e33\u0e2b\u0e19\u0e31\u0e01\u0e01\u0e32\u0e23\u0e09\u0e35\u0e14<\/td>\n180 g<\/td>\n190\/260 g<\/td>\n<\/tr>\n
Max Cavities \u2014 10 ml<\/td>\n\u2014<\/td>\n9<\/td>\n<\/tr>\n
Max Cavities \u2014 100 ml<\/td>\n\u2014<\/td>\n4<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\n2.72 x 1.9 x 2.75 m<\/td>\n3.5 x 1.3 x 1.7 m<\/td>\n<\/tr>\n
Dry Cycle<\/td>\n\u2014<\/td>\n3.5 s<\/td>\n<\/tr>\n
\u0e1e\u0e25\u0e31\u0e07\u0e07\u0e32\u0e19\u0e17\u0e31\u0e49\u0e07\u0e2b\u0e21\u0e14<\/td>\n\u2014<\/td>\n20 kW<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Jomar IBM40 reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.<\/p>\n

EP-ZQ40 Full Technical Specifications<\/h2>\n

The EP-ZQ40 is the entry-level model in the Ever Power ZQ series. Designed for small-to-medium pharmaceutical and cosmetic bottle production, its 400 kN injection clamping force, 40\/45 mm twin screw options and 3.5-second dry cycle deliver strong output within a compact 3.5 x 1.3 m floor area. Full specifications are grouped below by system.<\/p>\n

\u0e23\u0e30\u0e1a\u0e1a\u0e09\u0e35\u0e14<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
\u0e1e\u0e32\u0e23\u0e32\u0e21\u0e34\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/th>\nUnit<\/th>\nEP-ZQ40<\/th>\n<\/tr>\n<\/thead>\n
\u0e40\u0e2a\u0e49\u0e19\u0e1c\u0e48\u0e32\u0e19\u0e28\u0e39\u0e19\u0e22\u0e4c\u0e01\u0e25\u0e32\u0e07\u0e02\u0e2d\u0e07\u0e2a\u0e01\u0e23\u0e39<\/td>\nmm<\/td>\n40 \/ 45<\/td>\n<\/tr>\n
\u0e2d\u0e31\u0e15\u0e23\u0e32\u0e2a\u0e48\u0e27\u0e19 L\/D \u0e02\u0e2d\u0e07\u0e2a\u0e01\u0e23\u0e39<\/td>\n\u2014<\/td>\n22:1<\/td>\n<\/tr>\n
\u0e19\u0e49\u0e33\u0e2b\u0e19\u0e31\u0e01\u0e01\u0e32\u0e23\u0e09\u0e35\u0e14<\/td>\ng<\/td>\n190 \/ 260<\/td>\n<\/tr>\n
\u0e01\u0e33\u0e25\u0e31\u0e07\u0e04\u0e27\u0e32\u0e21\u0e23\u0e49\u0e2d\u0e19<\/td>\nkW<\/td>\n7.5<\/td>\n<\/tr>\n
\u0e08\u0e33\u0e19\u0e27\u0e19\u0e42\u0e0b\u0e19\u0e1a\u0e32\u0e23\u0e4c\u0e40\u0e23\u0e25<\/td>\n\u2014<\/td>\n3+N<\/td>\n<\/tr>\n
\u0e01\u0e32\u0e23\u0e09\u0e35\u0e14\u0e2a\u0e15\u0e23\u0e31\u0e04<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u0e23\u0e30\u0e1a\u0e1a\u0e08\u0e31\u0e1a\u0e22\u0e36\u0e14<\/h3>\n
\n\n\n\n\n\n\n\n\n\n
\u0e1e\u0e32\u0e23\u0e32\u0e21\u0e34\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/th>\nUnit<\/th>\nEP-ZQ40<\/th>\n<\/tr>\n<\/thead>\n
\u0e41\u0e23\u0e07\u0e22\u0e36\u0e14\u0e09\u0e35\u0e14<\/td>\nkN<\/td>\n400<\/td>\n<\/tr>\n
Injection Opening Stroke<\/td>\nmm<\/td>\n165<\/td>\n<\/tr>\n
\u0e41\u0e23\u0e07\u0e22\u0e36\u0e14\u0e41\u0e1a\u0e1a\u0e40\u0e1b\u0e48\u0e32\u0e25\u0e21<\/td>\nkN<\/td>\n60<\/td>\n<\/tr>\n
Blow Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
\u0e04\u0e27\u0e32\u0e21\u0e2a\u0e39\u0e07\u0e02\u0e2d\u0e07\u0e41\u0e17\u0e48\u0e19\u0e2b\u0e21\u0e38\u0e19<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Mould<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
\u0e1e\u0e32\u0e23\u0e32\u0e21\u0e34\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/th>\nUnit<\/th>\nEP-ZQ40<\/th>\n<\/tr>\n<\/thead>\n
Max Platen Size (L x W)<\/td>\nmm<\/td>\n480 x 340<\/td>\n<\/tr>\n
Mold Thickness<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n
Max Bottle Diameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Max Bottle Height<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Max Bottle Volume<\/td>\nml<\/td>\n1 to 1500<\/td>\n<\/tr>\n
\u0e08\u0e31\u0e07\u0e2b\u0e27\u0e30\u0e01\u0e32\u0e23\u0e25\u0e2d\u0e01<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Hydraulic System and Utilities<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0e1e\u0e32\u0e23\u0e32\u0e21\u0e34\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/th>\nUnit<\/th>\nEP-ZQ40<\/th>\n<\/tr>\n<\/thead>\n
\u0e41\u0e23\u0e07\u0e14\u0e31\u0e19\u0e44\u0e2e\u0e14\u0e23\u0e2d\u0e25\u0e34\u0e01<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
\u0e01\u0e33\u0e25\u0e31\u0e07\u0e21\u0e2d\u0e40\u0e15\u0e2d\u0e23\u0e4c<\/td>\nkW<\/td>\n11<\/td>\n<\/tr>\n
Dry Cycle<\/td>\ns<\/td>\n3.5<\/td>\n<\/tr>\n
\u0e1e\u0e25\u0e31\u0e07\u0e07\u0e32\u0e19\u0e17\u0e31\u0e49\u0e07\u0e2b\u0e21\u0e14<\/td>\nkW<\/td>\n20<\/td>\n<\/tr>\n
\u0e2d\u0e31\u0e15\u0e23\u0e32\u0e2a\u0e48\u0e27\u0e19\u0e01\u0e33\u0e25\u0e31\u0e07\u0e01\u0e32\u0e23\u0e17\u0e33\u0e07\u0e32\u0e19<\/td>\n%<\/td>\n52 to 70<\/td>\n<\/tr>\n
Min Air Pressure<\/td>\nMPa<\/td>\n0.7 to 1.2<\/td>\n<\/tr>\n
\u0e04\u0e27\u0e32\u0e21\u0e08\u0e38\u0e2d\u0e32\u0e01\u0e32\u0e28\u0e2d\u0e31\u0e14<\/td>\nm3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
\u0e01\u0e32\u0e23\u0e44\u0e2b\u0e25\u0e02\u0e2d\u0e07\u0e19\u0e49\u0e33\u0e2b\u0e25\u0e48\u0e2d\u0e40\u0e22\u0e47\u0e19<\/td>\nm3\/h<\/td>\n3.5<\/td>\n<\/tr>\n
\u0e41\u0e23\u0e07\u0e14\u0e31\u0e19\u0e19\u0e49\u0e33\u0e2b\u0e25\u0e48\u0e2d\u0e40\u0e22\u0e47\u0e19<\/td>\nMPa<\/td>\n0.3 to 0.4<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\nm<\/td>\n3.5 x 1.3 x 1.7<\/td>\n<\/tr>\n
\u0e19\u0e49\u0e33\u0e2b\u0e19\u0e31\u0e01\u0e2a\u0e38\u0e17\u0e18\u0e34<\/td>\nton<\/td>\n3.8<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.<\/p>\n

Cavity Configuration Guide<\/h2>\n

Cavity count is determined by bottle volume and mold design. At 10 ml, up to 9 cavities per cycle suit high-output pharmaceutical vial production. At 500 ml, 2 cavities per cycle match mid-volume cosmetic lotion bottle lines.<\/p>\n

\n\n\n\n\n\n
\u0e1b\u0e23\u0e34\u0e21\u0e32\u0e13<\/th>\n10 \u0e21\u0e25.<\/th>\n30 \u0e21\u0e25.<\/th>\n60 \u0e21\u0e25.<\/th>\n100 \u0e21\u0e25.<\/th>\n250 \u0e21\u0e25.<\/th>\n500 \u0e21\u0e25.<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
Max Cavities<\/td>\n9<\/td>\n8<\/td>\n6<\/td>\n4<\/td>\n3<\/td>\n2<\/td>\n1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Actual cavity count depends on mold design and bottle geometry.<\/p>\n

\n \"pharmaceutical
\n \"cosmetic
\n \"food\n<\/div>\n

Key Engineering Features<\/h2>\n
\n
\n

Full European-Style Structure<\/h3>\n

The all-European clamping architecture delivers 20 to 30% higher clamping force than comparable machines in the same tonnage class, providing greater preform stability and dimensional consistency across all cavities.<\/p>\n<\/p><\/div>\n

\n

Standard Servo Rotary Drive<\/h3>\n

Servo-driven rotation comes as standard equipment, simplifying the mechanical structure, reducing operator setup time and eliminating the maintenance overhead of hydraulic rotary systems.<\/p>\n<\/p><\/div>\n

\n

Pressurized Clamping System<\/h3>\n

The booster cylinder operates independently from mold-open and mold-close actions, reducing energy consumption by 10 to 20% compared with conventional single-circuit hydraulic clamping designs.<\/p>\n<\/p><\/div>\n

\n

Compact Floor Footprint<\/h3>\n

At 3.5 x 1.3 x 1.7 m, the EP-ZQ40 occupies significantly less factory floor area than many equivalent-capacity machines, enabling higher equipment density in existing production spaces.<\/p>\n<\/p><\/div>\n

\n

Zero Flash, Zero Scrap<\/h3>\n

The three-station simultaneous injection-blow-strip cycle produces no parting-line flash and zero trim waste, reducing material cost per bottle and eliminating the need for downstream flash removal equipment.<\/p>\n<\/p><\/div>\n

\n

Precise Neck Finish<\/h3>\n

Up to 9 cavities at 10 ml with accurate neck-finish geometry delivering reliable cap seal engagement \u2014 critical for pharmaceutical packaging where closure torque specifications are tightly controlled.<\/p>\n<\/p><\/div>\n<\/div>\n

Key Components and Supplier Origins<\/h2>\n

The EP-ZQ40 is assembled with internationally sourced components validated across thousands of production hours. Critical sealing, hydraulic and electronic parts are sourced from established European and Taiwanese suppliers.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No.<\/th>\nComponent<\/th>\nSupplier<\/th>\nOrigin<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nComputer<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
2<\/td>\nOil Pump Servo Driver<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
3<\/td>\nServo Motor<\/td>\nFisi<\/td>\nItaly<\/td>\n<\/tr>\n
4<\/td>\nOil Pump<\/td>\nEkor<\/td>\nGermany<\/td>\n<\/tr>\n
5<\/td>\nHydraulic Valve<\/td>\nOil Research<\/td>\nTaiwan<\/td>\n<\/tr>\n
6<\/td>\nFive-Star Motor<\/td>\nStaver (Haitian)<\/td>\nChina<\/td>\n<\/tr>\n
7<\/td>\nElectronic Ruler<\/td>\nGefran<\/td>\nItaly<\/td>\n<\/tr>\n
8<\/td>\nA.C. Contactor<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
9<\/td>\nHeating Relay<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
10<\/td>\nO-Type Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
11<\/td>\nSeal Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
12<\/td>\nTravel Switch<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
13<\/td>\nAir Switch<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
14<\/td>\nOil Pipe<\/td>\nISR<\/td>\nUSA<\/td>\n<\/tr>\n
15<\/td>\nAir Valve<\/td>\nFesto<\/td>\nGermany<\/td>\n<\/tr>\n
16<\/td>\nServo Rotary Motor<\/td>\nHuichuan<\/td>\nChina<\/td>\n<\/tr>\n
17<\/td>\nPCS Carton<\/td>\nMecano<\/td>\nChina<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.<\/p>\n

Compatible Materials and Industry Applications<\/h2>\n

The EP-ZQ40 processes a broad range of thermoplastics from 1 ml to 1500 ml, making it suitable across pharmaceutical, cosmetic, food and chemical packaging sectors.<\/p>\n

\n

Processable Materials<\/h3>\n
\n HDPE<\/span>
\n LDPE<\/span>
\n \u0e1e\u0e35\u0e1e\u0e35<\/span>
\n PS<\/span>
\n ABS<\/span>
\n EVA<\/span>
\n PCTG<\/span>
\n PLA (Bio)<\/span>\n <\/div>\n<\/div>\n
\n
\n
💊<\/div>\n

Pharmaceutical<\/h3>\n

Syrup bottles, eye drops, tablet containers, nasal spray flasks<\/p>\n<\/p><\/div>\n

\n
🧴<\/div>\n

Cosmetic<\/h3>\n

Lotion bottles, serum vials, shampoo containers, toner flasks<\/p>\n<\/p><\/div>\n

\n
🍽️<\/div>\n

Food and Beverage<\/h3>\n

Sauce bottles, oil containers, supplement packaging, dairy caps<\/p>\n<\/p><\/div>\n

\n
🧪<\/div>\n

Chemical and Daily Care<\/h3>\n

Cleaning agents, personal care, laboratory reagent containers<\/p>\n<\/p><\/div>\n<\/div>\n

Mold Design and Tooling<\/h2>\n

Ever Power manufactures its own ZQ-series injection blow molds machined from imported S136 high-strength alloy steel or 4Cr13 stainless steel. Mold cavities, neck blocks and runner systems are individually designed to each bottle geometry, ensuring gram-weight deviation and wall-thickness deviation are minimised from the first production run.<\/p>\n

\n \"injection
\n \"injection\n<\/div>\n
\n
\n

Steel Grade<\/h3>\n

4Cr13 stainless or imported S136 alloy. Blow molds may use magnesium-aluminium alloy for superior thermal conductivity and faster cycle times.<\/p>\n<\/p><\/div>\n

\n

Hot Runner System<\/h3>\n

Optimised hot runner and preform design minimises gram-weight and wall-thickness deviation. Unique mandrel structure enables rapid cycle times with effective internal cooling.<\/p>\n<\/p><\/div>\n

\n

Zero Waste Output<\/h3>\n

No flash on bottle mouth or base. Product dimensions, weight and wall thickness consistent across all cavities. No downstream regrind equipment required.<\/p>\n<\/p><\/div>\n<\/div>\n

Production Line Integration<\/h2>\n

The EP-ZQ40 integrates with a complete downstream production line covering filling, labelling, inspection and packing. Ever Power provides whole-line turnkey solutions from raw material feeding to finished carton output. For the full IBM machine range see the IBM machines overview<\/a>.<\/p>\n

\n \"EP-ZQ40\n<\/div>\n
\n \"auxiliary\n<\/div>\n
\n \u0e40\u0e04\u0e23\u0e37\u0e48\u0e2d\u0e07\u0e2d\u0e31\u0e14\u0e2d\u0e32\u0e01\u0e32\u0e28\u0e41\u0e1a\u0e1a\u0e2a\u0e01\u0e23\u0e39<\/span>
\n Air Compressor<\/span>
\n Mold Temperature Controller<\/span>
\n Chiller<\/span>
\n Packing Machine<\/span>
\n Bottle Visual Inspection Machine<\/span>
\n Auto Loader<\/span>\n<\/div>\n

Frequently Asked Questions<\/h2>\n
\n
\nHow does the EP-ZQ40 compare to the Jomar IBM40 in clamping force?<\/summary>\n
The EP-ZQ40 provides 400 kN injection clamping force versus 340 kN published for the Jomar IBM40 \u2014 approximately 18% higher \u2014 through its full European-style pressurized clamping structure where the booster cylinder operates separately from the mold-open action, also contributing to lower energy use per cycle.<\/div>\n<\/details>\n
\nWhat materials can the EP-ZQ40 process?<\/summary>\n
The EP-ZQ40 processes HDPE, LDPE, PP, PS (including lactic acid bacteria grades), high-clarity PS, ABS, environmentally friendly PLA, EVA and PCTG, producing containers from 1 ml to 1500 ml for pharmaceutical, cosmetic, food and daily-care packaging.<\/div>\n<\/details>\n
\nWhat bottle sizes and cavity counts does the EP-ZQ40 support?<\/summary>\n
Up to 9 cavities at 10 ml, 8 at 30 ml, 6 at 60 ml, 4 at 100 ml, 3 at 250 ml, 2 at 500 ml and 1 at 1000 ml. Maximum bottle diameter is 120 mm and maximum bottle height is 220 mm.<\/div>\n<\/details>\n
\nDoes the EP-ZQ40 carry CE certification?<\/summary>\n
Yes. The EP-ZQ40 is CE marked, confirming conformity with applicable European machinery safety and electromagnetic compatibility directives. Documentation is available on request for import compliance purposes.<\/div>\n<\/details>\n
\nWhat auxiliary equipment is recommended with the EP-ZQ40?<\/summary>\n
Core ancillaries include a screw air compressor or standard air compressor, chiller, mold temperature controller and auto loader. Downstream, a bottle visual inspection machine and packing machine complete the line. Ever Power supplies full turnkey lines or individual ancillaries to complement existing setups.<\/div>\n<\/details>\n<\/div>\n

Related IBM Machines<\/h2>\n
\n <\/p>\n
EP-ZQ60<\/div>\n
60T \u2014 up to 14 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

EP-ZQ80<\/div>\n
80T \u2014 up to 20 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

EP-ZQ110<\/div>\n
110T \u2014 up to 24 cavities at 10 ml<\/div>\n

<\/a>
\n <\/p>\n

\u0e2d\u0e35\u0e1e\u0e35-ZQ135<\/div>\n
135T \u2014 up to 30 cavities at 10 ml<\/div>\n

<\/a>\n<\/div>\n

\n

Sourcing an alternative to the Jomar IBM40?<\/h2>\n

Get in touch with our team for a detailed specification sheet and competitive quote.<\/p>\n

Contact Us<\/a>\n<\/div>\n