{"id":434,"date":"2026-07-22T09:05:39","date_gmt":"2026-07-22T09:05:39","guid":{"rendered":"https:\/\/onestepblowmoldingmachine.com\/product\/replacement-of-suma-85ib-injection-blow-molding-machine-ep-zq80\/"},"modified":"2026-07-22T09:05:48","modified_gmt":"2026-07-22T09:05:48","slug":"replacement-of-suma-85ib-injection-blow-molding-machine-ep-zq80","status":"publish","type":"product","link":"https:\/\/onestepblowmoldingmachine.com\/tr\/urun\/replacement-of-suma-85ib-injection-blow-molding-machine-ep-zq80\/","title":{"rendered":"Replacement of SUMA 85iB Injection Blow Molding Machine – EP-ZQ80"},"content":{"rendered":"
\n

European-Style Injection Blow Molding \u2014 80 Tonne Class<\/p>\n

High-Output IBM Machine with Single-Screw Simplicity in the SUMA 85iB Class<\/h2>\n

The EP-ZQ80 is an independently engineered machine in the same tonnage class as the SUMA 85iB \u2014 cited here only to assist buyers in comparing specifications \u2014 delivering 800 kN clamping, 466 g injection weight and 20 cavities at 10 ml from a single 55 mm screw.<\/p>\n

\n Get a Quote<\/a>
\n View All IBM Machines<\/a>\n <\/div>\n<\/div>\n

EP-ZQ80 vs SUMA 85iB \u2014 Specification Comparison<\/h2>\n

The SUMA 85iB is a recognised 80-tonne class machine from Taiwan. The EP-ZQ80 is an independently engineered alternative. SUMA 85iB figures are sourced from publicly available specification data. SUMA is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\nSUMA 85iB<\/th>\nEver Power EP-ZQ80<\/th>\n<\/tr>\n<\/thead>\n
Enjeksiyon S\u0131k\u0131\u015ft\u0131rma Kuvveti<\/td>\n720 kN<\/td>\n800 kN<\/td>\n<\/tr>\n
Screw Diameter<\/td>\n50\/60 mm (dual)<\/td>\n55 mm (single)<\/td>\n<\/tr>\n
Injection Weight<\/td>\n333\/480 g<\/td>\n466 g<\/td>\n<\/tr>\n
Mold Size (L x W)<\/td>\n700 x 400 mm<\/td>\n800 x 400 mm<\/td>\n<\/tr>\n
Machine Size (L x W x H)<\/td>\n4.5 x 2 x 2.6 m<\/td>\n4.5 x 1.6 x 2 m<\/td>\n<\/tr>\n
Max Cavities \u2014 10 ml<\/td>\n\u2014<\/td>\n20<\/td>\n<\/tr>\n
Dry Cycle<\/td>\n\u2014<\/td>\n4 s<\/td>\n<\/tr>\n
Toplam G\u00fc\u00e7<\/td>\n\u2014<\/td>\n55 kW<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

SUMA 85iB reference figures sourced from publicly available specification data. SUMA is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.<\/p>\n

EP-ZQ80 Full Technical Specifications<\/h2>\n

From the ZQ80 class upwards, the high-precision angle divider and dual hydraulic system are standard. The single 55 mm screw eliminates the dual-screw changeovers required on the SUMA 85iB class and delivers 466 g injection weight across all bottle volumes. View the full range at the IBM machines overview<\/a>.<\/p>\n

Injection System<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\nUnit<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Screw Diameter<\/td>\nmm<\/td>\n55<\/td>\n<\/tr>\n
Screw L\/D Ratio<\/td>\n\u2014<\/td>\n22:1<\/td>\n<\/tr>\n
Injection Weight<\/td>\ng<\/td>\n466<\/td>\n<\/tr>\n
Is\u0131tma G\u00fcc\u00fc<\/td>\nkW<\/td>\n11<\/td>\n<\/tr>\n
Number of Barrel Zones<\/td>\n\u2014<\/td>\n4+N<\/td>\n<\/tr>\n
Injection Stroke<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Clamping System<\/h3>\n
\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\nUnit<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Enjeksiyon S\u0131k\u0131\u015ft\u0131rma Kuvveti<\/td>\nkN<\/td>\n800<\/td>\n<\/tr>\n
Injection Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Blow Clamping Force<\/td>\nkN<\/td>\n120<\/td>\n<\/tr>\n
Blow Opening Stroke<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Rotary Table Lift Height<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Mould<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\nUnit<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Max Platen Size (L x W)<\/td>\nmm<\/td>\n800 x 400<\/td>\n<\/tr>\n
Mold Thickness<\/td>\nmm<\/td>\n280<\/td>\n<\/tr>\n
Max Bottle Diameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Max Bottle Height<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Maksimum \u015ei\u015fe Hacmi<\/td>\nml<\/td>\n1 to 2000<\/td>\n<\/tr>\n
Stripping Stroke<\/td>\nmm<\/td>\n230<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Hydraulic System and Utilities<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\nUnit<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Hydraulic Pressure<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
Motor G\u00fcc\u00fc<\/td>\nkW<\/td>\n18.5 + 18.5<\/td>\n<\/tr>\n
Dry Cycle<\/td>\ns<\/td>\n4<\/td>\n<\/tr>\n
Toplam G\u00fc\u00e7<\/td>\nkW<\/td>\n55<\/td>\n<\/tr>\n
Operating Power Ratio<\/td>\n%<\/td>\n52 to 70<\/td>\n<\/tr>\n
Min Air Pressure<\/td>\nMPa<\/td>\n0.8 to 1.2<\/td>\n<\/tr>\n
Compressed Air Capacity<\/td>\nm3\/min<\/td>\n0.8<\/td>\n<\/tr>\n
Cooling Water Flow<\/td>\nm3\/h<\/td>\n4<\/td>\n<\/tr>\n
So\u011futma Suyu Bas\u0131nc\u0131<\/td>\nMPa<\/td>\n0.3 to 0.4<\/td>\n<\/tr>\n
Machine Dimensions (L x W x H)<\/td>\nm<\/td>\n4.5 x 1.6 x 2<\/td>\n<\/tr>\n
Net Weight<\/td>\nton<\/td>\n10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.<\/p>\n

Cavity Output by Bottle Volume<\/h2>\n

The EP-ZQ80 reaches 20 cavities at 10 ml and 12 at 100 ml. The 800 x 400 mm platen \u2014 100 mm wider than the SUMA 85iB class \u2014 enables a broader cavity layout that supports these counts within the standard mold design envelope.<\/p>\n

\n\n\n\n\n\n
Hacim<\/th>\n10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
Maksimum Bo\u015fluklar<\/td>\n20<\/td>\n18<\/td>\n14<\/td>\n12<\/td>\n8<\/td>\n5-6<\/td>\n3-4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Actual cavity count depends on mold design and bottle geometry.<\/p>\n

\n \"pharmaceutical
\n \"personal
\n \"health\n<\/div>\n

Engineering Features of the EP-ZQ80<\/h2>\n
\n
\n

Single 55 mm Screw \u2014 No Changeover Needed<\/h3>\n

The SUMA 85iB class uses a dual 50\/60 mm screw configuration requiring a tool change when switching between bottle sizes. The EP-ZQ80 delivers 466 g from a single 55 mm screw across all supported volumes, eliminating changeover downtime and simplifying multi-SKU production scheduling.<\/p>\n<\/p><\/div>\n

\n

800 kN vs 720 kN \u2014 11% Higher Clamping<\/h3>\n

The EP-ZQ80 provides approximately 11% more injection clamping force than the SUMA 85iB class through its European-style pressurized clamping structure, enabling more stable preform filling at high cavity counts and supporting wider-neck bottle formats.<\/p>\n<\/p><\/div>\n

\n

Narrower and Lower: 4.5 x 1.6 x 2 m<\/h3>\n

Despite the same 4.5 m length, the EP-ZQ80 is 0.4 m narrower and 0.6 m shorter than the SUMA 85iB class. This reduces floor area and height clearance requirements \u2014 a significant advantage for pharmaceutical clean rooms and standard-height facilities.<\/p>\n<\/p><\/div>\n

\n

Wider Platen: 800 x 400 mm vs 700 x 400 mm<\/h3>\n

The 100 mm additional platen width versus the SUMA 85iB class enables wider horizontal cavity layouts and supports 20-cavity configurations at 10 ml that may be constrained on the narrower SUMA tooling footprint.<\/p>\n<\/p><\/div>\n

\n

Standard High-Precision Angle Divider<\/h3>\n

The angle divider synchronises mold-open and turret-lift throughout every cycle, eliminating positional drift at sustained 20-cavity production rates and maintaining gram-weight consistency across all positions.<\/p>\n<\/p><\/div>\n

\n

Dual Hydraulic Circuits \u2014 Energy Efficient<\/h3>\n

Two independent hydraulic circuits power injection-clamping and blow-clamping separately, reducing the duty cycle of each motor. Operating power runs at 52 to 70% of the 55 kW installed capacity under standard production conditions.<\/p>\n<\/p><\/div>\n<\/div>\n

\n \"EP-ZQ80\n<\/div>\n

Key Components and Supplier Origins<\/h2>\n

The EP-ZQ80 dual hydraulic circuit demands precision sealing. HALLITE O-rings and seal rings from England are specified for both circuits. Festo air valves from Germany manage blowing air across 20 cavities. Gefran position sensors from Italy support the high-precision angle divider operation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No.<\/th>\nComponent<\/th>\nSupplier<\/th>\nOrigin<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nComputer<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
2<\/td>\nOil Pump Servo Driver<\/td>\nHongxun<\/td>\nTaiwan<\/td>\n<\/tr>\n
3<\/td>\nServo Motor<\/td>\nFisi<\/td>\nItaly<\/td>\n<\/tr>\n
4<\/td>\nOil Pump<\/td>\nEkor<\/td>\nGermany<\/td>\n<\/tr>\n
5<\/td>\nHydraulic Valve<\/td>\nOil Research<\/td>\nTaiwan<\/td>\n<\/tr>\n
6<\/td>\nFive-Star Motor<\/td>\nStaver (Haitian)<\/td>\nChina<\/td>\n<\/tr>\n
7<\/td>\nElectronic Ruler<\/td>\nGefran<\/td>\nItaly<\/td>\n<\/tr>\n
8<\/td>\nA.C. Contactor<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
9<\/td>\nHeating Relay<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
10<\/td>\nO-Type Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
11<\/td>\nSeal Ring<\/td>\nHALLITE<\/td>\nEngland<\/td>\n<\/tr>\n
12<\/td>\nTravel Switch<\/td>\nYANMING<\/td>\nTaiwan<\/td>\n<\/tr>\n
13<\/td>\nAir Switch<\/td>\nSchneider<\/td>\nFrance<\/td>\n<\/tr>\n
14<\/td>\nOil Pipe<\/td>\nISR<\/td>\nUSA<\/td>\n<\/tr>\n
15<\/td>\nAir Valve<\/td>\nFesto<\/td>\nGermany<\/td>\n<\/tr>\n
16<\/td>\nServo Rotary Motor<\/td>\nHuichuan<\/td>\nChina<\/td>\n<\/tr>\n
17<\/td>\nPCS Carton<\/td>\nMecano<\/td>\nChina<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.<\/p>\n

Compatible Materials and Industry Applications<\/h2>\n

The EP-ZQ80 processes the full ZQ material range. The 466 g single-screw injection weight benefits HDPE and PP containers in the 250 to 2000 ml range. The 4+N barrel zone configuration supports consistent melt temperature across all supported materials.<\/p>\n

\n

Processable Materials<\/h3>\n
HDPE<\/span>LDPE<\/span>PP<\/span>PS<\/span>ABS<\/span>EVA<\/span>PCTG<\/span>PLA (Bio)<\/span><\/div>\n<\/div>\n
\n
\n
💊<\/div>\n

\u0130la\u00e7<\/h3>\n

High-cavity vial lines, oral liquid bottles, tablet containers, wide-mouth supplement jars<\/p>\n<\/div>\n

\n
🪴<\/div>\n

Personal Care<\/h3>\n

High-volume shampoo, conditioner, body lotion and hand wash bottle production<\/p>\n<\/div>\n

\n
🍽️<\/div>\n

Food and Supplements<\/h3>\n

Protein powder jars, edible oil bottles, sports nutrition, condiment containers<\/p>\n<\/div>\n

\n
🧪<\/div>\n

Chemical and Industrial<\/h3>\n

Cleaning products, agrochemical containers, laboratory reagent bottles<\/p>\n<\/div>\n<\/div>\n

Mold Design for the EP-ZQ80<\/h2>\n

The 800 x 400 mm platen is 100 mm wider than the SUMA 85iB class, enabling wider mold layouts for 20-cavity configurations. Injection mold bodies are machined from 4Cr13 stainless or S136 alloy steel. Optional magnesium-aluminium blow mold bodies provide faster thermal cycling at high cavity rates.<\/p>\n

\n \"blow
\n \"injection\n<\/div>\n
\n
\n

100 mm Wider Platen Than SUMA 85iB<\/h3>\n

The 800 mm platen width versus 700 mm on the SUMA 85iB provides additional layout space for 20-cavity mold configurations and optimised spacing for larger neck formats.<\/p>\n<\/div>\n

\n

4+N Zone Hot Runner<\/h3>\n

Four independently controlled barrel zones provide consistent melt temperature across all supported materials, reducing thermal variation between cavities and improving gram-weight consistency at 20-cavity output rates.<\/p>\n<\/div>\n

\n

Zero Scrap \u2014 All Cavity Counts<\/h3>\n

No gate mark, no parting flash and no runner trim at any cavity count. At 20 cavities material savings versus extrusion blow molding are substantial across a full pharmaceutical production shift.<\/p>\n<\/div>\n<\/div>\n

Production Line Integration<\/h2>\n

The EP-ZQ80 suits high-throughput production lines requiring matched downstream capacity at 20 cavities. Ever Power provides complete turnkey line proposals including equipment sizing and installation support.<\/p>\n

\n \"EP-ZQ80\n<\/div>\n
\n \"auxiliary\n<\/div>\n
Screw Air Compressor<\/span>Air Compressor<\/span>Mold Temperature Controller<\/span>Chiller<\/span>Packing Machine<\/span>Bottle Visual Inspection Machine<\/span>Auto Loader<\/span><\/div>\n

Technical Questions \u2014 EP-ZQ80<\/h2>\n
\n
\nHow does the EP-ZQ80 single screw compare to the SUMA 85iB dual-screw setup?<\/summary>\n
The SUMA 85iB class uses a dual 50\/60 mm screw configuration requiring tool changes when switching between bottle sizes. The EP-ZQ80 delivers 466 g injection weight from a single 55 mm screw across all volumes from 1 ml to 2000 ml \u2014 eliminating changeover downtime for multi-SKU production lines and simplifying machine operation.<\/div>\n<\/details>\n
\nWhat materials can the EP-ZQ80 process?<\/summary>\n
HDPE, LDPE, PP, PS, ABS, EVA, PCTG and bio-based PLA. The 466 g injection weight is particularly suited to HDPE and PP containers in the 250 to 2000 ml range, while the 4+N barrel zone configuration provides consistent melt temperature across the full material range.<\/div>\n<\/details>\n
\nWhat cavity counts does the EP-ZQ80 support?<\/summary>\n
Up to 20 cavities at 10 ml, 18 at 30 ml, 14 at 60 ml, 12 at 100 ml, 8 at 250 ml, 5 to 6 at 500 ml and 3 to 4 at 1000 ml \u2014 the highest counts in the 80-tonne ZQ class.<\/div>\n<\/details>\n
\nIs the EP-ZQ80 CE certified?<\/summary>\n
Yes. The EP-ZQ80 is CE marked, confirming conformity with applicable European machinery safety and EMC directives. CE documentation is supplied with the machine and available in advance on request for import and procurement compliance.<\/div>\n<\/details>\n
\nWhat auxiliary equipment is recommended for the EP-ZQ80?<\/summary>\n
A screw air compressor is recommended over a piston compressor at this output level due to the 0.8 m3\/min compressed air requirement. A chiller, mold temperature controller and auto loader are core ancillaries. Downstream inspection and packing equipment should be rated for 20-cavity throughput. Ever Power provides complete turnkey line proposals on request.<\/div>\n<\/details>\n<\/div>\n

Related IBM Machines<\/h2>\n
<\/p>\n
EP-ZQ40<\/div>\n
40T \u2014 up to 9 cavities at 10 ml<\/div>\n

<\/a><\/p>\n

EP-ZQ60<\/div>\n
60T \u2014 up to 14 cavities at 10 ml<\/div>\n

<\/a><\/p>\n

EP-ZQ110<\/div>\n
110T \u2014 up to 24 cavities at 10 ml<\/div>\n

<\/a><\/p>\n

EP-ZQ135<\/div>\n
135T \u2014 up to 30 cavities at 10 ml<\/div>\n

<\/a><\/div>\n

\n

Reviewing options in the SUMA 85iB class?<\/h2>\n

Get in touch with our team for a detailed specification sheet and competitive quote.<\/p>\n

Bize Ula\u015f\u0131n<\/a>\n<\/div>\n