Máy thổi chai PET tự động EP-HGA.JS-2CB152 có quai cầm — 3000ml, 2 khoang, chuyên dụng cho chai đựng dầu ăn có quai cầm

Dedicated Handle-Bottle Structural Configuration

The JS-2CB152’s clamping station, blow mold station, and mold-opening mechanism are designed specifically for handle-profile molds — molds whose cavity half includes the full bottle body profile plus the integrated handle geometry. The mold-opening sequence on a handle-bottle machine must separate the mold halves in a way that clears the handle geometry without any mold contact with the handle or adjacent body — a mechanical design requirement that does not exist in standard round-bottle clamping systems.

Integrated Handle — Not a Snap-On Insert

There are two handle solutions for large-format edible oil bottles: snap-on plastic handle inserts (applied after the bottle is blown on a standard machine) and integrated blown handles (formed in the same cycle as the bottle body, requiring a dedicated handle-bottle machine). The JS-2CB152 produces integrated blown handles — the preferred solution for edible oil brands that require a structurally integral handle for load-bearing performance and a premium bottle appearance without a visible insert attachment point.

Edible Oil Primary Application

Consumer edible oil bottles in the 1-litre, 1.5-litre, and 2-litre range with integrated handles are the dominant packaging format for edible oil globally — covering cooking oil, olive oil, sunflower oil, canola oil, and specialty oils. The food-grade PET production cycle on the JS-2CB152, combined with the integrated handle capability, covers the complete standard edible oil handle bottle range up to 3,000ml from a single machine installation.

2-Cavity at 3,000ml Handle Format

Two cavities at handle-bottle scale produces double the output of a single-cavity configuration at the same cycle time. The 2-cavity configuration on the JS-2CB152 reflects the output requirement for dedicated edible oil handle bottle production lines — where single-cavity output would typically be insufficient for the annual production volumes of established edible oil brands.

Food-Grade PET Edible Oil Compliance

PET produced on the JS-2CB152 using approved food-grade PET resin meets FDA 21 CFR and EU 10/2011 food-contact compliance for edible oil packaging. PET offers superior oxygen barrier properties versus standard polyolefin containers at equivalent wall thickness — a relevant performance advantage for edible oil packaging where oxidative rancidity is the dominant shelf-life constraint.

Only Handle Machine — No Other HGA Option

If your container specification includes an integrated handle, the JS-2CB152 is the only machine in the entire HGA automatic RSBM series that can produce it. No ES, AS, FS, or standard JS series machine — regardless of model or configuration — has the structural capability to produce PET bottles with integrated blown handles. The JS-2CB152 is a unique machine in the lineup for a unique application requirement.

Edible Oil Handle Bottles (1–3L)

Cooking oil, olive oil, specialty oil — integrated handle

Large Handle Containers

Any large-format container requiring integrated handle

Application: 1-litre, 1.5-litre, and 2-litre integrated-handle PET sunflower oil and olive oil bottles for a Turkish edible oil producer distributing through Turkish retail and export to Germany and the Netherlands.

Problem solved: The producer’s German and Dutch retail buyers required integrated-handle PET bottles — not snap-on insert handles — as a packaging quality standard. The JS-2CB152 was the only automatic RSBM option that could produce integrated handle bottles in their size range. Switching from external supplier snap-on-handle bottles to in-house integrated-handle PET production reduced per-bottle cost by 24% and met the EU retail channel packaging specification.

“German retail demanded integrated handles. Snap-on inserts didn’t meet their packaging specification. The JS-2CB152 was the only automatic option. In-house production also dropped our bottle cost 24% — that covered the machine in three years.”

Application: 1-litre and 2-litre integrated-handle PET cooking oil bottles for a Moroccan edible oil manufacturer distributing through Moroccan retail and export to West Africa.

Problem solved: The manufacturer’s existing HDPE bottle line could not produce the integrated-handle PET format their retail buyers were specifying. The JS-2CB152 enabled the transition to integrated-handle PET — improving shelf differentiation (PET clarity versus opaque HDPE), reducing bottle weight by 15%, and opening the West African export channel where the integrated-handle PET format was the standard retail specification for branded cooking oil.

“Retail was moving to integrated-handle PET. HDPE couldn’t follow. The JS-2CB152 made the switch — clearer bottles, lighter weight, and West Africa opened up to us because we had the right format.”

Application: 1-litre and 2-litre integrated-handle PET cooking oil bottles for a Philippine cooking oil brand distributing nationally through supermarket and wet market channels.

Problem solved: The brand had been using a snap-on insert handle system on its PET bottles — an approach that required a separate handle insertion step, added per-unit cost, and created occasional quality failures when handles detached under load. The JS-2CB152 eliminated the handle insertion step entirely by producing integrated handles in the blow cycle, removing the insert cost, the insertion quality risk, and the handle detachment complaint rate.

“Snap-on inserts were adding cost and causing handle detachment complaints. The JS-2CB152 eliminated both — no insert step, no insertion cost, no handle failures. The integrated handle is structurally part of the bottle. There’s nothing to fall off.”