EP-HGA.ES-4C150 Automatic PET Blow Molding Machine — 2500ml, 4 Cavity, Cosmetic & Food Wide-Mouth Bottles

150mm — Widest 4-Cavity ES Configuration

At 150mm blow mold close, the ES-4C150 reaches the maximum body diameter available in the standard 4-cavity ES series — 120mm body diameter and 2,500ml container volume. This dimensional ceiling makes the ES-4C150 the correct selection for the largest cosmetic and food containers that remain within the ES series envelope, before the FS series’ dedicated wide-mouth platform is required for neck diameter reasons.

Large-Format Cosmetic & Body Care (1,500–2,500ml)

Family-size shampoo, conditioner, and body wash dispensers in the 1,500–2,500ml range are the primary cosmetic application for the ES-4C150. This container size tier — commonly sold through club retail, professional supply, and hospitality distribution channels — requires 4-cavity output for commercially viable production rates and container volumes beyond the ES-4C130’s 1,500ml ceiling.

Food Wide-Mouth Jars (1,000–2,500ml)

Food condiment and sauce jars, preserve containers, and bulk food packaging in the wide-mouth format up to 2,500ml are a core application for the ES-4C150. At 120mm body diameter and 2,500ml volume, the ES-4C150 covers the standard large condiment jar format — the size used by food service and club-pack condiment producers where 4-cavity output provides commercially viable production rates for high-volume SKUs.

ES vs FS at This Volume: The Neck Diameter Decision

At 2,500ml volume, the choice between the ES-4C150 and the FS series depends solely on neck diameter. If your container’s neck diameter requirement is within the ES series envelope, the ES-4C150 provides 4-cavity output at this volume. If your neck diameter requirement exceeds the ES series maximum, the FS series is required regardless of container volume. Send your bottle drawing to our engineering team to confirm which platform is correct for your specification.

Servo Drive & Extended Heating Zone

Internationally sourced servo motors with digital PLC management and extended multi-zone infrared heating for 2,500ml preforms. Larger preforms at 2,500ml volume require a longer heating zone and more heating sections than standard ES machines at 1,500ml — the ES-4C150’s extended heating array is calibrated for the temperature gradient required to achieve consistent wall thickness distribution across the taller and larger-volume blown container body.

Food & Cosmetic Grade Compliance

Zero hand-contact production cycle satisfying food-contact (FDA 21 CFR, EU 10/2011) and cosmetic industry hygiene requirements. PET and PETG produced on the ES-4C150 with appropriate food-grade resin meet food-contact compliance for sauce, condiment, and preserve applications. The same machine serves cosmetic applications with appropriate PETG or high-clarity PET resin grades for premium cosmetic bottle clarity requirements.

Application: 2,000ml and 2,500ml PET professional shampoo and conditioner bottles for an Italian professional hair care brand distributing through salon professional supply channels across southern Europe.

Problem solved: The brand’s 2,500ml professional supply format exceeded the 1,500ml ceiling of the ES-4C130. The ES-4C150 covered both the 2,000ml and 2,500ml formats from one 4-cavity installation, providing the output rate required for the professional supply channel at a container size the brand’s previous machine could not produce.

“2,500ml was the format the professional supply chain demanded. The ES-4C130 couldn’t reach it. The ES-4C150 covered both sizes we needed with 4-cavity output — that’s the professional supply volume requirement met.”

Application: 1,500ml and 2,000ml wide-mouth PET ketchup and sauce jars for a Turkish food condiment producer distributing through Turkish retail and food service channels and export to the Middle East.

Problem solved: The producer needed 4-cavity output at 2,000ml wide-mouth jar specification — a volume and cavity combination that the ES-4C130 reached on volume but that required confirmation the ES-4C130’s body diameter envelope could accommodate the 2,000ml jar geometry. The ES-4C150’s larger 120mm body diameter envelope at 4-cavity output confirmed correct for the wide-mouth sauce jar specification.

“4-cavity at 2,000ml wide-mouth jar. The ES-4C150 confirmed the right body diameter envelope for our sauce jar geometry. Output and volume in one specification — the ES-4C150 delivered both.”

Application: 2,000ml and 2,500ml PET shampoo and body wash bottles for two UK daily chemical brand clients served on a contract packaging basis, distributing through UK club retail and online channels.

Problem solved: Both brand clients required the 2,000ml and 2,500ml format for club-pack retail distribution — a format that the contract packager could not produce on their existing ES-4C130 installation, which was limited to 1,500ml. The ES-4C150 enabled the packager to enter the club-pack retail tier with both clients, adding a new distribution channel without requiring a separate machine for each client.

“Club retail demanded 2,500ml. Our ES-4C130 maxed at 1,500ml. The ES-4C150 opened the club-pack channel for both clients from one machine. One investment, one new channel, two clients activated.”