Beschreibung
Wide-Mouth RSBM Machine · 1 Cavity · 130mm · Up to 1,500ml · Baby Bottle · PP Bottle · Special-Shaped
EP-HGA.FS-1CG130 Wide-Mouth Blow Molding Machine
A 1-cavity automatic RSBM machine engineered for wide-mouth PET containers up to 1,500ml — baby bottles, PP-style wide-neck containers, and special-shaped craft bottles that require neck diameters beyond what the ES series can accommodate. The FS series exists because neck diameter is the constraint that determines machine type, not container volume.
Why FS Instead of ES — The Neck Diameter Requirement
Every ES series machine is designed for standard narrow-to-mid neck diameters — typically up to 48mm (ES-4C76) or 98mm (ES-4C130) maximum neck opening. When your container requires a neck diameter beyond what the ES series supports at your target container volume — most commonly for baby bottles, wide-mouth PP containers, and specialty craft bottles — the FS series is the correct machine selection.
| Selection Factor | ES-Serie | FS Series (This Machine) |
|---|---|---|
| Primäre Anwendung | Standard narrow/mid-neck bottles | Wide-mouth, baby & PP bottles |
| Max. Neck Diameter | Up to ~98mm (ES-4C130) | Significantly larger — wide-mouth capable |
| Container Profile | Round standard profiles | Wide-mouth, special-shaped, PP-style |
| Cavity Count | 2, 3, 4, 6, 8 cavities | 1 cavity (FS-1CG) or 2 cavity (FS-2CG) |
| Decision Rule | Standard neck diameter needed | Wide neck diameter is the requirement |
If your bottle specification requires a neck diameter that the ES series cannot accommodate, the FS series is the correct platform regardless of container volume. Send us your bottle drawing and our engineering team will confirm the correct machine selection.
FS-1CG130 vs FS-1CG150 — Selecting Between Adjacent Models
The FS-1CG130 and FS-1CG150 are the two entry-level single-cavity wide-mouth models in the FS series. Both target the same industries and container type range. Selection between them is based on container body height and profile:
| Spezifikation | FS-1CG130 (This Page) | FS-1CG150 |
|---|---|---|
| Blow Mold Close | 130 mm | 150 mm |
| Maximales Containervolumen | 1.500 ml | 1.500 ml |
| Body Profile | Compact wide-mouth profile | Taller body profile |
| Best For | Shorter, wider-body containers | Taller, standard-height wide-mouth containers |
| Industries | Baby + PP + Cosmetic + Special-shaped | Baby + PP + Cosmetic + Special-shaped |
If you are unsure which model fits your bottle geometry, send us your bottle drawing with container height and neck diameter — our engineering team will specify the correct model.
Maschinenübersicht
Der EP-HGA.FS-1CG130 is a single-cavity automatic RSBM machine engineered for wide-mouth PET containers up to 1,500ml. The FS designation identifies it as a wide-mouth specialist — a machine whose clamping and blow mold geometry is designed for neck diameters and container profiles that fall outside the dimensional envelope of the standard ES series.
The primary application categories for the FS-1CG130 are baby bottles and PP-style wide-neck containers in the 150–1,500ml range, wide-mouth cosmetic and daily chemical containers requiring large neck openings, and special-shaped or craft bottles whose non-round body profiles require the wider mold clearance that the FS platform provides. In each of these categories, the selection of the FS series over the ES series is driven by container specification — specifically the neck diameter requirement — rather than production volume.
The single-cavity configuration reflects the technical reality of wide-mouth production: the larger mold half area required per cavity at wide-mouth specifications limits practical cavity count at the FS-1CG130 mold-close dimension. For buyers requiring higher output at wide-mouth specifications, the FS-2CG220 dual-cavity model is the next step in the FS series output progression.
Technische Spezifikationen
| Complete Specifications — EP-HGA.FS-1CG130 | ||
|---|---|---|
| Parameter | Einheit | Wert |
| Hohlräume | — | 1 |
| Blasformverfahren – geringer Abstand | mm | 130 |
| Maximales Containervolumen | ml | 1,500 |
| Container Profile | — | Wide-mouth, special-shaped, PP-style, baby bottle |
| Servoantrieb | — | Ja – Servomotoren aus internationaler Produktion |
| Heizsystem | — | Mehrzonen-Infrarotsteuerung mit digitaler SPS-Steuerung |
| Produktionsmodus | — | Fully automatic, zero hand-contact cycle |
| Harzverträglichkeit | — | PET, PETG, PP-compatible preforms |
| Blasdruck | kg/cm² | 35 |
| Kühlwassertemperatur | °C | 8–12 |
Complete detailed specifications — including clamping stroke, mold-close distances, heating power, air consumption, machine footprint, and weight — are provided in the technical datasheet. Request the full datasheet here.
Technische Kernmerkmale
Wide-Mouth Mold Platform
The FS-1CG130 mold platform is designed from the outset for wide-mouth container profiles — wider clamping geometry, wider blow mold clearance, and a preform-to-bottle path optimised for containers whose neck-to-body diameter ratio differs significantly from standard narrow-format bottles. This platform difference is why the FS series is a separate machine type from the ES series, not simply an ES machine with wider settings.
Baby Bottle & PP Container Capability
Baby bottles and PP-style wide-neck containers are the primary industrial application for the FS-1CG130. The wide-mouth platform accommodates the larger neck opening required for standard baby bottle neck finishes — typically 40mm to 60mm bore diameter — that no ES series machine can produce regardless of blow mold close dimension. Autoclave sterilisation compatibility is achievable with appropriate PET resin and preform selection.
Special-Shaped & Craft Bottle Production
Special-shaped and craft bottles — asymmetric profiles, non-round cross-sections, complex body geometries — require greater mold clearance than standard round bottles of equivalent volume. The FS-1CG130’s wider mold platform accommodates the larger mold half-profiles required for complex bottle geometries that would not fit within the mold clearance constraints of ES series machines at the same container volume.
Servo Drive & Digital PLC
Internationally sourced servo motors with digital PLC management and multi-zone infrared heating control. The servo drive’s precision positioning is particularly important for wide-mouth production where larger preforms require more precisely controlled heating profiles to achieve consistent wall thickness distribution across the wider blown container body.
Cosmetic & Daily Chemical Wide-Mouth Compatibility
Wide-mouth cosmetic jars, cream containers, and daily chemical dispensers requiring large neck openings for wide-bore dispensing or jar-style access are covered by the FS-1CG130 dimensional envelope. These are cosmetic and daily chemical applications where the neck diameter requirement — driven by the jar format or dispensing mechanism — makes the FS series the correct selection regardless of the container volume falling within the ES series range.
Zero Hand-Contact Production Cycle
Fully automatic production from preform loading to finished bottle discharge without hand contact. The contamination exclusion standard that this provides is particularly relevant for baby bottle production, where hygiene at the container-forming stage is a baseline requirement for infant-facing products across all regulatory markets globally.
Branchenanwendungen
Baby Bottles (150–500ml)
Wide-mouth neck, BPA-concern grade resin
PP-Style Wide-Neck Containers
Wide-bore dispensing, cream jar style
Special-Shaped Craft Bottles
Non-round profiles, asymmetric, gift packaging
Cosmetic Wide-Mouth Jars
Cream jars, large-opening cosmetic containers
Kundenfallstudien
France — Baby Products Manufacturer
★★★★★
Anwendung: 150ml, 250ml, and 300ml wide-mouth PET baby bottles for a French infant products brand distributing across EU retail and pharmacy channels.
Problem gelöst: The manufacturer had been sourcing baby bottles from an external molder at a per-unit cost that was compressing margins on the EU pharmacy distribution channel. When they investigated in-house production, every ES series machine they assessed could not accommodate the 52mm neck bore their bottle specification required. The FS-1CG130 was the correct selection — producing the full baby bottle range from 150ml to 300ml in-house and reducing per-bottle cost by 28%.
“The neck diameter requirement ruled out every ES machine. The FS-1CG130 was the only automatic RSBM option that could produce our bottle. The cost reduction was the business case — the baby bottle capability was the technical prerequisite.”
Argentina — Cosmetic Jar Producer
★★★★★
Anwendung: 200ml, 500ml, and 1,000ml wide-mouth PET cosmetic cream jars for an Argentinian cosmetic brand and OEM packager serving South American retail channels.
Problem gelöst: The packager needed to produce wide-mouth cream jars requiring a 70mm neck opening — a specification that the ES series cannot accommodate at any model. The FS-1CG130 produced the complete cream jar range from 200ml to 1,000ml from a single machine installation, enabling the packager to serve both their own brand and three OEM clients from one production platform.
“70mm neck opening. No ES machine touches that. The FS-1CG130 produces our entire cream jar range — own brand and three OEM clients — from one installation. That’s the right machine for the application.”
Malaysia — Specialty Packaging OEM
★★★★★
Anwendung: Special-shaped craft bottles and novelty containers in 100ml to 800ml range for a Malaysian specialty packaging OEM serving gift packaging and premium retail clients in ASEAN markets.
Problem gelöst: The OEM’s clients required complex asymmetric bottle profiles that could not be produced on ES series machines due to mold clearance constraints. The FS-1CG130’s wider mold platform accommodated the complex half-mold profiles required for asymmetric craft bottles, enabling the OEM to offer PET special-shaped production without investing in semi-automatic equipment.
“Complex molds need mold clearance. The FS-1CG130 gave us the clearance for asymmetric profiles that the ES series couldn’t handle. Full automatic production for bottles our competitors were doing semi-automatically.”
Häufig gestellte Fragen
Enquire About the EP-HGA.FS-1CG130
For baby bottle, wide-mouth PP container, special-shaped craft bottle, or cosmetic jar production requiring neck diameters beyond the ES series envelope. Share your bottle drawing, neck diameter, and target volume for a machine type confirmation and technical assessment.
