EP-HGA.ES-3C114 Automatic PET Blow Molding Machine — 1500ml, 3 Cavity, Cosmetic & Pharmaceutical Bottles

3 Cavities at 114mm — Precise Output Step

The 3-cavity configuration at 114mm mold close delivers 2,400 bph — a 20% increase over the 2-cavity ES-2C114.3 at 2,000 bph and 27% below the 4-cavity ES-4C114 at 3,300 bph. This positions the ES-3C114 as the correct selection for manufacturers whose annual production target falls between approximately 16 million and 22 million bottles at 1,000–1,500ml format.

95mm Max Body Diameter — Dual Market

At 95mm maximum body diameter, the ES-3C114 spans the upper range of standard pharmaceutical round bottles and the lower-to-mid range of cosmetic pump dispensers simultaneously. This dual applicability allows contract manufacturers and OEM packagers to deploy the machine across both pharmaceutical and cosmetic clients from a single installation.

1,500ml Maximum Volume

The maximum volume of 1,500ml extends the ES-3C114 beyond the ES-2C114.3’s 1,000ml ceiling — making it the only 3-cavity configuration in the 114mm mold-close tier that reaches the 1,500ml segment, a volume bracket important for large-format pharmaceutical syrups and full-size cosmetic dispenser bottles.

Servo-Driven Process Control

International-brand servo motors with PLC-based digital management control all motion axes. The servo system’s precise positioning across three cavity positions ensures consistent stretch timing and blow pressure distribution across all three cavities simultaneously — a requirement for maintaining the ±1.5g or better cavity-to-cavity weight tolerance needed for pharmaceutical documentation compliance.

Zone-Controlled Infrared Heating

The digital zone-by-zone infrared heating system controls temperature along the preform body independently by zone. At 114mm mold close and 1,500ml maximum volume, preforms are longer and require a more extended heating zone layout than at 76mm close. The multi-zone control enables precise thermal profiling for both short cosmetic flacons and tall pharmaceutical syrups within the same machine configuration.

GMP & Cosmetic Grade Hygiene

The fully automated zero-contact cycle meets GMP pharmaceutical hygiene requirements and cosmetic industry cleanliness standards simultaneously — supporting deployments where the same machine serves both regulated and non-regulated packaging clients within the same facility. No physical modification is required when switching between pharmaceutical and cosmetic production runs.

Cosmetic Pump Dispensers

500ml–1,500ml cosmetic pump dispenser bottles for shampoo, conditioner, body lotion, and face wash in the 95mm body diameter range. The 3-cavity output at 2,400 bph is appropriate for mid-scale cosmetic brands producing between 15 and 25 million bottles annually at this format.

Large-Format Pharmaceutical Syrups

500ml–1,500ml pharmaceutical syrup and oral suspension bottles for regulated pharmaceutical manufacturing environments. The 95mm body diameter accommodates standard wide-shoulder pharmaceutical bottle profiles used in suspension dosage forms that require wider container geometries than standard tablet bottles.

Application: 500ml and 1,000ml PET cosmetic pump bottles for three OEM cosmetic brand clients in Morocco and France, produced on a single contract manufacturing line.

Problem solved: The contract manufacturer had been operating two 2-cavity machines to serve three clients at different output levels — a scheduling arrangement that required constant machine reallocation between client orders. The ES-3C114 consolidated all three client volumes onto a single machine at 2,400 bph, simplifying the production schedule and reducing setup changeover frequency by 40%.

“Three clients, one machine, one schedule. The 3-cavity output hit the combined volume target across all three accounts without the scheduling overhead of two machines.”

Application: 500ml and 1,000ml PET pharmaceutical syrup bottles with 40mm child-resistant neck finish for a Dhaka-based pharmaceutical manufacturer registered with DGDA.

Problem solved: The facility’s existing 2-cavity machine was producing at a rate insufficient to supply both domestic and export orders simultaneously. A 4-cavity machine would have exceeded their contracted export volume and created unsold inventory. The ES-3C114 at 2,400 bph exactly matched their combined domestic plus export production requirement, eliminating the inventory surplus problem while satisfying all order commitments.

“The 4-cavity machine would have left us with inventory we couldn’t sell. The 3-cavity hit the exact output we needed to fulfil domestic and export orders without overproduction.”

Application: 750ml and 1,500ml PET personal care pump bottles for a Chilean brand supplying retail chains across Chile, Peru, and Colombia.

Problem solved: The brand was sourcing 750ml and 1,500ml bottles from different suppliers with different tooling, creating visible container profile inconsistency between the two sizes — a brand consistency problem flagged by their retail buyer. In-house production on the ES-3C114 using a common mold family produced both sizes with consistent profile geometry, resolving the brand consistency issue and reducing per-unit bottle cost by 19%.

“Our retail buyer noticed the profile mismatch between our 750ml and 1,500ml bottles. In-house production with one machine and one mold family fixed it. The cost saving was a bonus.”