Descrizione
European-Style Injection Blow Molding — 60 Tonne Class
High-Cavity Mid-Range IBM Machine in the SUMA 65iB Performance Class
The EP-ZQ60 is an independently engineered machine in the same tonnage class as the SUMA 65iB — referenced only to assist buyers in comparing specifications — with 600 kN clamping force and up to 14 cavities at 10 ml for sustained mid-volume production.
EP-ZQ60 vs SUMA 65iB — Specification Comparison
The SUMA 65iB is a widely specified 60-tonne class machine from Taiwan. The EP-ZQ60 is an independently engineered alternative in the same capacity class. SUMA 65iB figures are sourced from publicly available data. SUMA is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parametro | SUMA 65iB | Ever Power EP-ZQ60 |
|---|---|---|
| Forza di serraggio dell'iniezione | 580 kN | 600 kN |
| Diametro della vite | 40/50 mm | 45/50 mm |
| Peso dell'iniezione | 169/264 g | 260/383 g |
| Dimensioni dello stampo (L x P) | 620 x 400 mm | 600 x 390 mm |
| Dimensioni della macchina (L x P x A) | 4 x 1.7 x 2.3 m | 3.8 x 1.4 x 1.8 m |
| Cavità massime: 10 ml | — | 14 |
| Ciclo a secco | — | 4 secondi |
| Potenza totale | — | 37 kW |
SUMA 65iB reference figures sourced from publicly available specification data. SUMA is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ60 Full Technical Specifications
The EP-ZQ60 is the mid-range model in the Ever Power ZQ series. At 600 kN clamping force and with twin 45/50 mm screw options, it handles larger preform weights than the ZQ40 and delivers higher cavity counts — making it the preferred configuration for mid-volume cosmetic and pharmaceutical packaging lines in the 30 to 500 ml range. See the full ZQ range at the Panoramica delle macchine IBM.
Sistema di iniezione
| Parametro | Unità | EP-ZQ60 |
|---|---|---|
| Diametro della vite | mm | 45 / 50 |
| Rapporto L/D della vite | — | 22:1 |
| Peso dell'iniezione | G | 260 / 383 |
| Potenza di riscaldamento | kW | 14 |
| Numero di zone della canna | — | 3+N |
| Ictus da iniezione | mm | 160 |
Sistema di serraggio
| Parametro | Unità | EP-ZQ60 |
|---|---|---|
| Forza di serraggio dell'iniezione | kN | 600 |
| Ictus di apertura dell'iniezione | mm | 140 |
| Forza di serraggio del colpo | kN | 100 |
| Colpo di apertura | mm | 140 |
| Altezza di sollevamento della tavola rotante | mm | 70 |
Muffa
| Parametro | Unità | EP-ZQ60 |
|---|---|---|
| Dimensioni massime del piano di appoggio (L x P) | mm | 600 x 390 |
| Spessore dello stampo | mm | 240 |
| Diametro massimo della bottiglia | mm | 120 |
| Altezza massima della bottiglia | mm | 220 |
| Volume massimo della bottiglia | ml | Da 1 a 2000 |
| Colpo di stripping | mm | 230 |
Impianto idraulico e servizi ausiliari
| Parametro | Unità | EP-ZQ60 |
|---|---|---|
| Pressione idraulica | MPa | 14 |
| Potenza del motore | kW | 18.5 / 22 |
| Ciclo a secco | S | 4 |
| Potenza totale | kW | 37 |
| Rapporto di potenza operativa | % | dai 52 ai 70 |
| Pressione minima dell'aria | MPa | 0.7 to 1.2 |
| Capacità dell'aria compressa | m3/min | 0.7 |
| Flusso dell'acqua di raffreddamento | m3/h | 4 |
| Pressione dell'acqua di raffreddamento | MPa | Da 0,3 a 0,4 |
| Dimensioni della macchina (L x P x A) | M | 3.8 x 1.4 x 1.8 |
| Peso netto | tonnellata | 5 |
I parametri sono forniti a solo scopo di riferimento. Ever Power si riserva il diritto di modificare le specifiche senza preavviso.
Cavity Output by Bottle Volume
The EP-ZQ60 delivers 14 cavities at 10 ml and 8 at 100 ml, making it well suited to pharmaceutical oral liquid and cosmetic packaging lines. At 1000 ml, 2 cavities per cycle support efficient larger-container production.
| Volume | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
|---|---|---|---|---|---|---|---|
| Cavità massime | 14 | 12 | 10 | 8 | 5 | 3 | 2 |
Solo a titolo di riferimento. Il numero effettivo di cavità dipende dal design dello stampo e dalla geometria della bottiglia.
Engineering Features of the EP-ZQ60
600 kN vs 580 kN — Higher Clamping Capacity
The EP-ZQ60 provides 600 kN injection clamping force versus 580 kN in the SUMA 65iB class. Combined with the European-style pressurized clamping structure, this delivers improved preform consistency and dimensional stability across all cavity counts.
Higher Injection Weight: 260/383 g vs 169/264 g
The EP-ZQ60 injection weight of 260 to 383 g is substantially higher than the 169 to 264 g of the SUMA 65iB class. This enables heavier preforms for larger bottles and more flexibility when processing higher-density engineering polymers within the same tonnage class.
Smaller Footprint: 3.8 x 1.4 x 1.8 m
At 3.8 x 1.4 x 1.8 m the EP-ZQ60 is smaller than the 4 x 1.7 x 2.3 m profile of the SUMA 65iB class in all three dimensions, simplifying installation in standard industrial buildings and pharmaceutical clean rooms where height clearance is limited.
45 mm and 50 mm Screw Options
Both 45 mm and 50 mm screws are available, versus a 40/50 mm split on the SUMA 65iB. The 45 mm option provides a mid-range plasticising capacity suited to standard pharmaceutical and cosmetic resins, while the 50 mm option is optimised for higher-throughput applications.
Extended Volume Range to 2000 ml
The EP-ZQ60 supports bottles from 1 ml to 2000 ml, extending the upper volume range beyond the ZQ40 and enabling the machine to cover a wider product portfolio including larger household and food-service container formats.
Energy Savings via Pressurized Clamping
The booster cylinder in the EP-ZQ60 clamping system operates independently from the mold-open and mold-close actions, reducing the hydraulic circuit duty cycle and lowering actual operating power consumption to 52 to 70% of the 37 kW installed capacity.
Key Components and Supplier Origins
The EP-ZQ60 uses the same internationally validated component supply chain as all ZQ-series machines. Schneider contactors from France, HALLITE hydraulic seals from England, Festo air valves from Germany and Gefran position sensors from Italy combine with Hongxun servo drives from Taiwan to deliver long-term reliability.
| NO. | Componente | Fornitore | Origine |
|---|---|---|---|
| 1 | Computer | Hongxun | Taiwan |
| 2 | Azionamento servo della pompa dell'olio | Hongxun | Taiwan |
| 3 | Servomotore | Fisi | Italia |
| 4 | Pompa dell'olio | Ekor | Germania |
| 5 | Valvola idraulica | Ricerca sul petrolio | Taiwan |
| 6 | Motore a cinque stelle | Staver (Haitiano) | Cina |
| 7 | Righello elettronico | Gefran | Italia |
| 8 | Contattore CA | Schneider | Francia |
| 9 | Relè di riscaldamento | YANMING | Taiwan |
| 10 | Anello di tipo O | HALLITE | Inghilterra |
| 11 | Anello di tenuta | HALLITE | Inghilterra |
| 12 | Cambio di viaggio | YANMING | Taiwan |
| 13 | Interruttore pneumatico | Schneider | Francia |
| 14 | Tubo dell'olio | ISR | U.S.A. |
| 15 | Valvola dell'aria | Festo | Germania |
| 16 | Servomotore rotativo | Huichuan | Cina |
| 17 | Cartone PCS | Mecano | Cina |
I fornitori dei componenti possono essere sostituiti con alternative equivalenti o superiori, a seconda della disponibilità, senza preavviso.
Material Compatibility and Industry Applications
The EP-ZQ60 processes the same broad material range as the ZQ40 with a higher injection weight capacity, extending its suitability to larger and heavier containers. High-clarity PCTG and transparent PS are particularly relevant for the cosmetic and nutraceutical packaging sectors served by this machine class.
Materiali lavorabili
LDPE
PP
PS
ABS
EVA
PCTG
PLA (Bio)
Cosmetic Packaging
Serum vials, lotion bottles, essence containers, transparent PCTG cosmetic packaging
Farmaceutico
Syrup bottles, oral liquid containers, vitamin supplement jars, nasal wash bottles
Nutraceutical
Protein supplement containers, collagen bottles, vitamin and wellness packaging
Food and Beverage
Honey jars, condiment bottles, edible oil containers, infant nutrition packaging
Mold Design for the EP-ZQ60
The EP-ZQ60 max platen of 600 x 390 mm is closely comparable to the 620 x 400 mm of the SUMA 65iB class, enabling similar multi-cavity mold arrangements while using purpose-designed Ever Power tooling. Injection mold bodies are machined from 4Cr13 stainless or S136 alloy steel, with optional magnesium-aluminium blow mold bodies for high-speed pharmaceutical production.
Comparable Platen to SUMA 65iB
At 600 x 390 mm the EP-ZQ60 platen closely matches the 620 x 400 mm of the SUMA 65iB, enabling comparable cavity layout strategies using Ever Power tooling designed for the ZQ60 geometry.
Hot Runner Optimised for 10-Cavity Layout
The hot runner system is individually calculated for each mold layout to ensure consistent material distribution across up to 10 cavities at 60 ml, minimising gram-weight deviation at sustained production rates.
Zero Scrap Output
No parting flash, no gate mark, no runner trim. Material utilisation approaches 100% per cycle — particularly valuable when processing expensive engineering resins such as PCTG and PLA.
Configurazione della linea di produzione
The EP-ZQ60 operates as the central machine in a complete bottle production line. Ever Power supplies whole-line turnkey proposals covering upstream material handling and downstream labelling, filling, capping and packing for both new installations and capacity expansion projects.
Compressore d'aria
Regolatore di temperatura dello stampo
Chiller
Macchina per l'imballaggio
Macchina per l'ispezione visiva delle bottiglie
Caricatore automatico
Technical Questions — EP-ZQ60
Macchine IBM correlate
Comparing options in the SUMA 65iB class?
Get in touch with our team for a detailed specification sheet and competitive quote.
