Сипаттама
One-Step ISBM · 150 kN Class · ASB-12M Compatible · 10-Axis Full Servo · GMP
Full Servo 4-Station One-Step ISBM for Pharmaceutical, Cosmetic & Food Packaging
An independently engineered full-servo machine in the same class as the NISSEI ASB-12M — featuring 10-axis closed-loop servo control, GMP pharmaceutical compliance, and direct ASB-12M mould compatibility.
EP-HGY150-V4-EV vs NISSEI ASB-12M — Specification Comparison
The table below sets key parameters side by side. NISSEI ASB-12M data is sourced from the NISSEI ASB official product brochure and NPE 2018 exhibition materials. NISSEI ASB is cited solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Параметр | NISSEI ASB-12M | Ever Power EP-HGY150-V4-EV |
|---|---|---|
| Инъекциялық қысқыш күш | 137 kN | 150 kN |
| Соққы қысқыш күші | 116 kN | — |
| Stations | 4 | 4 |
| Max Cavities | 1–8 (size-dependent) | Up to 8 |
| Дыбыс диапазоны | ≤5 ml – 2,500 ml | 50 ml – 2,500 ml |
| Primary Resins | PET, PP, PC, PLA, PEN, PS, PES, PPSU (15+ types) | PET / PETG / Tritan / PC / PP |
| Drive System | Servo Hydraulic | 10-Axis Full Servo (Inovance) |
| GMP Compliance | — | ✔ Pharma-Grade |
| Nano IR Heating | — | ✔ Standard |
| CE Certification | — | ✔ CE Certified |
| Machine Dimensions | 4,625 × 1,210 × 3,076 mm | — |
NISSEI ASB-12M figures from official NISSEI ASB product brochure & NPE 2018 exhibition materials. NISSEI ASB is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-HGY150-V4-EV Key Features
10-Axis Full Servo Control
Every motion axis — injection, turntable, mould clamping, stretch blow, and take-out — is governed by closed-loop Inovance servo feedback. Eliminates hydraulic variability and delivers sub-millimetre cycle-to-cycle repeatability.
GMP Pharmaceutical Compliance
Zero hand-contact production cycle, PLC-based parameter traceability per batch, and IQ/OQ/PQ documentation support — satisfying GMP requirements that standard machines cannot meet.
Nano Far-Infrared Heating
Patented nano far-infrared heating rings deliver faster, more uniform preform temperature distribution than conventional nichrome elements — reducing conditioning time and improving wall-thickness uniformity across all cavities.
Dual Servo Mould Clamping
Dual servo mould clamping with high-pressure compensation comes standard — providing higher clamp-force accuracy and faster open/close cycles versus single-servo alternatives.
Direct ASB-12M Mould Compatibility
Retain existing ASB-12M format tooling. Platen dimensions, tie-bar spacing and blow station geometry match ASB-12M standard for direct installation — zero adaptation cost.
Factory Direct · CE Certified
Sold from a 20,000 m² production facility with no distributor markup. CE marked. Full FAT documentation and dedicated after-sales engineering support throughout the machine service life.
How the EP-HGY150-V4-EV Works — 10-Axis Full Servo One-Step ISBM
Unlike servo-pump machines where hydraulic circuits still govern individual motion axes, the EP-HGY150-V4-EV places every axis — all 10 — under independent closed-loop servo motor control. This architectural difference eliminates hydraulic variability at its source, delivering pharmaceutical-grade dimensional repeatability from the first production cycle through the ten-thousandth.
Closed-loop servo feedback on injection speed, pressure, and hold across every cycle. Shot weight variation held to <0.5% — the tolerance floor required by pharmaceutical GMP cavity documentation and luxury cosmetic fill-weight specifications.
Patented nano far-infrared heating rings replace conventional nichrome elements — 30% faster temperature equilibration, more uniform wall-temperature distribution, and lower heater power draw. Gate trimmed. No reheat oven. Energy saving vs two-step: up to 40%.
Dual independent servo motors govern mould clamping with high-pressure compensation — eliminating the clamp-force variation that causes wall-thickness deviation on hydraulic machines. Stretch rod speed and blow pressure each servo-controlled for biaxial orientation precision.
Servo-driven take-out arm ejects finished bottles to the discharge belt. Zero human hand contact throughout the production cycle — a hard GMP requirement. PLC logs cycle parameters (speed, pressure, temperature, weight) for every batch — IQ/OQ/PQ documentation basis.
Industries & Applications
The EP-HGY150-V4-EV is specified for applications where dimensional precision, GMP documentation, and zero-tolerance contamination control are non-negotiable. The 10-axis full servo architecture unlocks production quality that servo-pump machines cannot match.
Pharmaceutical GMP
Eye drops, oral liquid vials, injectable bottle — GMP-grade zero-contact cycle, PLC batch traceability, IQ/OQ/PQ documentation basis from first production run.
Luxury Cosmetics
Premium serum flacons, perfume bottles, high-end skincare — 10-axis servo delivers glass-like optical clarity and sub-millimetre neck tolerance for precision closure systems.
Baby & Infant Products
BPA-free baby bottles in Tritan, PC — autoclave-safe, zero-contact production, ±0.05 mm neck-dimension consistency for teat-seal integrity across all cavities.
Medical & Clinical
Sample collection containers, clinical reagent bottles, PP medical closures — servo repeatability and full batch parameter logging meet regulated packaging validation standards.
Specialty & Craft Bottles
Asymmetric profiles, multi-faceted art-glass containers, complex non-round luxury packaging — full servo control reproduces complex geometries consistently that hydraulic machines cannot.
Nutraceutical & Supplements
Protein powder jars, vitamin supplement bottles, premium health packaging in Tritan — biaxial orientation in wide-mouth formats with superior barrier for sensitive contents.
Жиі қойылатын сұрақтар
Need a full-servo alternative to the NISSEI ASB-12M?
Share your mould drawings and production targets — our engineering team responds within 1 business day.
