Opis
One-Step ISBM · AL-350LL-40 Class · Factory Direct
EP-HGYS280-V6 — One-Step ISBM Alternative to AOKI AL-350LL-40
A 6-station twin-screw full-servo one-step ISBM machine for the high-output narrow-neck segment — up to 16 cavities per cycle, secondary cooling station, GMP-ready zero-contact production in the AOKI AL-350LL-40 class.
EP-HGYS280-V6 vs AOKI AL-350LL-40 — Specification Comparison
AOKI AL-350LL-40 data sourced from MachineTools.com AOKI-350LL-40 product page and aokitech.co.jp AL Series product description. AL-350LL-40: 40 metric ton clamping (≈392 kN); narrow-neck containers up to 2 L; mass production machine. AOKI is cited solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parametr | AOKI AL-350LL-40 | Ever Power EP-HGYS280-V6 |
|---|---|---|
| Siła zacisku wtrysku | 40 t metric (≈392 kN) | — |
| Stacje | 4 | 6 |
| Max Cavities | — | Up to 16 (twin-screw) |
| Zakres głośności | Up to 2 L (narrow neck) | Narrow neck, up to 2 L |
| Układ napędowy | Hydraulic | Full Servo (all axes) |
| Injection Configuration | Single unit | Twin-screw dual injection |
| Secondary Cooling Station | No | Yes (Station 5) |
| GMP Compliance | — | ✔ Pharma-Grade |
| Primary Resins | PET, PP | PET / PETG / PP / Tritan |
| CE Certification | — | ✔ Certyfikat CE |
AOKI AL-350LL-40 reference figures sourced from publicly available machine listings and specifications. AOKI is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-HGYS280-V6 Key Features
Twin-Screw Dual Injection — Up to 16 Cavities
Two independent injection units on the 6-station rotary table double available injection capacity per cycle versus single-unit machines — enabling up to 16 cavities for narrow-neck bottles in the ≤2 L range that the AL-350LL-40 targets.
6-Station Architecture with Secondary Cooling
The additional 5th station (secondary cooling) reduces per-cycle cooling time — enabling faster cycles for high-cavitation narrow-neck production. This is the key architectural advantage of 6-station over the AL-350LL-40’s 4-station design.
Full Servo — All Axes
Every station governed by independent closed-loop servo drives — GMP-ready zero-contact production with PLC batch traceability. The AL-350LL-40’s conventional hydraulic system cannot meet GMP documentation requirements.
Mass Production — Narrow Neck
Purpose-built for the same high-volume narrow-neck segment as the AL-350LL-40 — water bottles, pharmaceutical vials, cosmetic flacons, daily chemical containers up to 2 L at the highest per-shift output.
PET / PETG / PP / Tritan
Full narrow-neck resin range — PET for clarity, PP for moisture barrier, Tritan (BPA-free) for pharmaceutical and baby products, PETG for premium cosmetics.
Factory Direct · CE Certified
Sold from a 20,000 m² production facility. CE marked. Full FAT documentation and dedicated after-sales engineering support throughout machine service life.
How the EP-HGYS280-V6 Works — 6-Station Twin-Screw One-Step ISBM
The EP-HGYS280-V6 is the highest-specification machine in the HGY family — a 6-station full-servo ISBM with a twin-screw dual-injection-unit configuration. Two independent injection units feed the same rotary table, enabling up to 16 cavities per cycle with enhanced preform quality from twin-screw plasticisation. This architecture directly addresses the high-output narrow-neck segment that the AOKI AL-350LL-40 targets.
Two independent injection units operate simultaneously on the 6-station rotary table — doubling available injection capacity per cycle versus single-unit 4-station machines. Enables up to 16 cavities per cycle for narrow-neck bottles.
Every station governed by independent closed-loop servo drives — the conditioning, stretch-blow, secondary cooling, and take-out stations each servo-controlled for precision and repeatability. GMP-ready zero-contact production cycle.
The additional 5th station (secondary cooling) reduces per-cycle cooling time — enabling faster cycle speeds for high-cavitation narrow-neck production. This is the architectural advantage of 6-station over 4-station design for small bottles.
Automatic servo take-out at station 6. No flash, no scrap, no human hand contact throughout the production cycle. PLC parameter logging for full batch traceability across all 16 cavity positions.
The EP-HGYS280-V6 is the highest-output one-step ISBM platform — serving the narrow-neck high-cavitation segment for water, pharmaceutical, cosmetic, and daily chemical production that demands maximum bottles-per-shift from a single machine investment.
Water & Beverage
High-output mineral water, juice, and soft drink bottles — 6-station twin-screw architecture delivers the highest bottles-per-shift in the narrow-neck ISBM segment.
Pharmaceutical GMP
Oral liquid vials, eye drops, nasal spray — 6-station full servo zero-contact production with PLC batch traceability for regulated pharmaceutical lines.
Cosmetics & Personal Care
High-output serum flacons, lotion bottles, toner containers — twin-screw injection delivers superior shot-weight consistency across all 16 cavity positions.
Daily Chemical
Shampoo, hand wash, cleaning products — maximum per-shift output for high-volume daily chemical lines serving supermarket and private-label brands.
Baby & Infant
BPA-free baby bottles in Tritan and PC — servo zero-contact cycle at maximum cavitation for high-volume infant product manufacturing.
Food & Condiments
Sauce, condiment, and food-grade narrow-neck containers — 6-station twin-screw enables food-grade production at per-shift volumes that exceed conventional 4-station capacity.
Często zadawane pytania
Evaluating AOKI AL-350LL-40 alternatives?
Share your container specification and production targets — our engineering team responds within 1 business day.
