Opis
One-Step ISBM · 150 kN Class · ASB-12M Compatible
4-Station One-Step ISBM for Pharmaceutical, Cosmetic & Food Packaging
An independently engineered machine in the same class as the NISSEI ASB-12M — with direct ASB-12M mould compatibility, 3-set servo pump system, and a one-step cycle that eliminates the reheat oven.
EP-HGY150-V4 vs NISSEI ASB-12M — Specification Comparison
The table below sets key parameters side by side. NISSEI ASB-12M data is sourced from the NISSEI ASB official product brochure and NPE 2018 exhibition materials. NISSEI ASB is cited solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parametr | NISSEI ASB-12M | Ever Power EP-HGY150-V4 |
|---|---|---|
| Siła zacisku wtrysku | 137 kN | 150 kN |
| Blow Clamping Force | 116 kN | — |
| Stacje | 4 | 4 |
| Max Cavities | 1–8 (size-dependent) | Up to 8 |
| Zakres głośności | ≤5 ml – 2,500 ml | 50 ml – 2,500 ml |
| Primary Resins | PET, PP, PC, PLA, PEN, PS, PES, PPSU (15+ types) | PET / PETG / Tritan / PC / PP |
| Układ napędowy | Servo Hydraulic | 3-zestawowy system pomp serwo |
| GMP Compliance | — | — |
| Nano IR Heating | — | — |
| CE Certification | — | ✔ Certyfikat CE |
| Machine Dimensions | 4,625 × 1,210 × 3,076 mm | — |
NISSEI ASB-12M figures from official NISSEI ASB product brochure & NPE 2018 exhibition materials. NISSEI ASB is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-HGY150-V4 Key Features
Direct ASB-12M Mould Compatibility
Existing ASB-12M format tooling installs directly — no adaptation fixtures, no re-tooling cost. Retain your bottle specifications and mould investment while switching to a more competitive machine platform.
3-zestawowy system pomp serwo
Three independent servo-driven hydraulic pumps govern injection, clamping, and auxiliary functions separately — reducing energy consumption and enabling faster, more consistent cycle times.
No Secondary Reheating
The one-step process consolidates injection, conditioning, stretch-blow and take-out in a single machine — eliminating the reheat oven and reducing energy by up to 40% versus two-step systems.
50 ml – 2,500 ml Range
Handles small pharmaceutical vials at 50 ml through to 2,500 ml large-format cosmetic and food containers, with up to 8 cavities per cycle on compatible bottle formats.
PET / PETG / Tritan / PC / PP
Broader resin coverage than standard ISBM class machines — processes PET, PETG, Tritan (BPA-free), PC, and PP without additional tooling investment.
Factory Direct · CE Certified
Sold directly from a 20,000 m² production facility. CE marked with full FAT documentation and a recommended spare parts list. After-sales engineering support throughout machine service life.
How the EP-HGY150-V4 Works — One-Step ISBM with 3-Set Servo Pump
The EP-HGY150-V4 runs a 4-station one-step cycle driven by three independent servo hydraulic pumps — one pump per major axis (injection, clamping, auxiliary). This 3-set servo pump architecture eliminates cross-circuit hydraulic interference, reducing energy consumption by 15–20% versus single-pump machines of the same tonnage and enabling consistent cycle times across 1–8 cavity configurations.
PET injected around core pin. Neck finish formed to tolerance. Screw Ø 40–60 mm. No flash. No scrap.
Preform retains injection heat. Standard heater equalises wall temperature. Gate trimmed. No reheat oven = 40% energy saved vs 2-step.
Stretch rod + 2.0–3.5 MPa blow air = biaxial orientation. Superior O₂ barrier, compression strength, and clarity versus EBM containers.
Auto-ejected to discharge belt. Zero hand contact. 3-set servo ensures timing consistency across all 8 cavities.
Industries & Applications
The EP-HGY150-V4 is the standard production platform for PET container manufacturing across consumer goods, food, beverage, and daily chemical industries — broad resin compatibility and direct ASB-12M mould compatibility make it the cost-effective choice for mid-volume multi-industry lines.
Pharmaceutical
Oral liquid bottles, tablet containers, nasal spray — zero-contact automated production from 50 ml to 500 ml.
Food & Wide-Mouth Jars
Sauce jars, condiment containers, food-grade wide-mouth jars — biaxial PET orientation for superior shelf-life vs EBM.
Daily Chemical
Shampoo, body wash, hand soap containers in PET — consistent neck finish and wall thickness at 2–8 cavities per cycle.
Water & Beverage
Mineral water, juice, soft drink bottles from 500 ml to 2,500 ml — high output per shift, direct ASB-12M tooling compatibility.
Edible Oil & Handle Bottles
Cooking oil, vinegar, soy sauce containers — food-grade PET with excellent chemical resistance and glass-like clarity.
Chemical & Pesticide
Chemical reagent, pesticide, cleaning product containers — PETG chemical resistance with injection-formed precision neck finish.
Często zadawane pytania
Evaluating NISSEI ASB-12M alternatives?
Share your mould drawings and production targets — our engineering team responds within 1 business day.
