Descrição
One-Step ISBM · SBIII-100L-20 Class · Factory Direct
EP-HGY150-V4 — One-Step ISBM Alternative to AOKI SBIII-100L-20
An independently engineered 4-station one-step ISBM machine in the same compact versatile class as the AOKI SBIII-100L-20 — with 150 kN injection clamping, up to 8 cavities, and a 50 ml–2,500 ml range.
EP-HGY150-V4 vs AOKI SBIII-100L-20 — Specification Comparison
AOKI SBIII-100L-20 data sourced from MachineTools.com SBIII-100LL-20S listing (20T / ≈196 kN) and petmachinery.com used machine specification (4-cavity hot runner block). AOKI is cited solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parâmetro | AOKI SBIII-100L-20 | Ever Power EP-HGY150-V4 |
|---|---|---|
| Força de fechamento da injeção | 20 t metric (≈196 kN) | 150 kN |
| Estações | 4 | 4 |
| Cavidades máximas | 4 (confirmed from machine listings) | Up to 8 |
| Container Types | Narrow neck & wide mouth | Narrow neck, wide mouth, jars |
| Drive System | Hydraulic | 3-Set Servo Pump |
| Primary Resins | PET, PP, PC, PEN | PET / PETG / Tritan / PC / PP |
| Certificação CE | — | ✔ CE Certified |
| Supply Model | Distributor network | Direto da fábrica |
AOKI SBIII-100L-20 reference figures sourced from publicly available machine listings and specifications. AOKI is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-HGY150-V4 Key Features
Higher Clamping Force
150 kN vs 20 t (≈196 kN) — the EP-HGY150-V4 provides comparable clamping in the same general machine class, with a 3-set servo pump system for more consistent pressure distribution across all 8 cavity positions.
Up to 8 Cavities vs 4
Double the maximum cavitation of the SBIII-100L-20 class — enabling higher per-shift output without upgrading to a larger machine format or second machine investment.
50 ml – 2,500 ml Range
Wider production range than the SBIII-100L-20 — from small pharmaceutical vials to 2,500 ml large-format cosmetic and food containers, all from the same machine without tooling format changes.
PET / PETG / Tritan / PC / PP
Broader resin compatibility covering pharmaceutical (PC, Tritan), cosmetic (PETG), food and beverage (PET), and daily chemical packaging.
3-Set Servo Pump System
Three independent servo-driven hydraulic pumps govern injection, clamping, and auxiliary circuits separately — reducing energy consumption and enabling faster, more consistent cycles versus single-pump designs.
Factory Direct · CE Certified
Sold from a 20,000 m² production facility. CE marked. No distributor markup. Full FAT documentation and dedicated after-sales engineering support throughout machine service life.
How the EP-HGY150-V4 Works — 4-Station One-Step ISBM
The EP-HGY150-V4 runs a 4-station one-step cycle with a 3-set servo pump system — each pump independently governing injection, clamping, and auxiliary circuits. This architecture delivers consistent cycle timing across 1–8 cavity configurations without the cross-circuit interference of single-pump designs.
PET resin injected around the core pin at 150 kN injection clamping force. Neck finish and thread geometry formed to closure-compatibility tolerance. 3-set servo pumps ensure consistent injection pressure per cavity across all 8 cavity positions.
Preform retains injection heat to the conditioning station — no reheat oven needed. Gate trimmed. Standard heater equalises wall temperature. Energy saving up to 40% vs two-step RSBM at identical output.
Stretch rod + 2.0–3.5 MPa blow air produces simultaneous biaxial molecular orientation — superior O₂ barrier, compression resistance, and optical clarity versus EBM containers at identical wall thickness.
Automatic ejection. Zero flash, zero scrap, zero manual contact at any station. 3-servo pump maintains consistent cycle timing at all cavitation levels — 1 to 8 cavities.
The EP-HGY150-V4 is a versatile mid-size platform covering pharmaceutical, cosmetic, food, and daily chemical packaging — with direct ASB-12M mould compatibility and a wide resin range for multi-industry production flexibility.
Produtos Farmacêuticos
Oral liquid bottles, tablet containers, nasal spray — zero-contact automated production from 50 ml to 500 ml in PET, PC, PP.
Cosmetics & Daily Care
Lotion bottles, serum flacons, shampoo containers — consistent neck finish and wall thickness at 2–8 cavities per cycle.
Food & Beverage
Mineral water, juice, sauce containers from 50 ml to 2,500 ml — biaxial PET orientation for superior barrier vs EBM.
Produtos Químicos Diários
Hand soap, cleaning product containers in PET and PETG — chemical resistance with glass-like clarity.
Baby & Infant
BPA-free baby bottles in Tritan and PC — zero-contact production, tight neck tolerances for teat-seal integrity.
Edible Oil & Condiments
Cooking oil and condiment bottles — food-grade PET with excellent chemical resistance and optical clarity.
Perguntas frequentes
Evaluating AOKI SBIII-100L-20 alternatives?
Share your container specification and production targets — our engineering team responds within 1 business day.
