EP-HGA.ES-6C114 High-Output Automatic PET Blow Molding Machine — 1500ml, 6 Cavity, Cosmetic & Water & Chemical

6 Cavities at 114mm — 50% More Output vs ES-4C114

Six cavities at 114mm mold close delivers approximately 50% more output per cycle than the 4-cavity ES-4C114 at the same mold-close standard. For buyers whose annual production requirement at 114mm mold-close specification has outgrown 4-cavity capacity, the ES-6C114 provides the next output step without requiring a different mold-close standard — preserving existing 114mm tooling compatibility subject to plate dimension and guide pin confirmation.

1,500ml at 114mm — Larger Volume vs ES-6C76

The ES-6C114 reaches 1,500ml maximum container volume at 6 cavities — more than double the 700ml maximum of the ES-6C76 at the same cavity count. For cosmetic and beverage producers whose 6-cavity output requirement is at the 1,500ml container format (large shampoo bottles, beverage bottles), the ES-6C114 delivers the volume that the ES-6C76 cannot reach while maintaining the high-output 6-cavity configuration.

Cosmetic, Beverage & Chemical Bottle Coverage

The ES-6C114 covers three industries at 1,500ml: cosmetic and daily chemical (shampoo, body wash, conditioner in large-format dispensers), water and beverage (1–1.5 litre bottles at high-output 6-cavity rate), and chemical and pesticide (1–1.5 litre chemical containers at 6-cavity output). The three-industry coverage at this volume and mold-close combination is the defining capability of the ES-6C114 in the ES high-output series.

Servo Drive & Extended 6-Cavity Heating

Internationally sourced servo motors with digital PLC management and extended 6-cavity multi-zone infrared heating. Six cavities at 114mm mold close requires a wider heating array than 4-cavity production at the same mold-close dimension — the heating zone must serve six preform positions simultaneously at 1,500ml preform size. Zone-by-zone calibration at commissioning ensures uniform temperature across all six positions for consistent cavity-to-cavity bottle quality.

Consolidated Output vs Multiple 4-Cavity Machines

One ES-6C114 installation at 6-cavity output replaces approximately 1.5× the combined output of one ES-4C114 machine at equivalent container size. For buyers operating one ES-4C114 and expanding production, the ES-6C114 provides the output expansion without the installation complexity of a second machine — one utility connection, one operator position, one maintenance programme at higher combined output than a single ES-4C114.

94mm Body Diameter at 6-Cavity Scale

94mm maximum body diameter at 1,500ml covers the standard round bottle format for cosmetic dispensers, 1-litre beverage bottles, and chemical containers at this volume tier. This body diameter is equivalent to the ES-4C114 maximum at the same mold-close dimension — the ES-6C114 adds two cavities without changing the container dimensional envelope, making it a direct output scale-up from the ES-4C114 for the same bottle specifications.

Application: 1,000ml and 1,500ml PET shampoo and conditioner bottles for a Colombian personal care manufacturer distributing across Colombia and export to Ecuador and Peru through retail and professional supply channels.

Problem solved: The manufacturer’s ES-4C114 installation was producing at capacity — unable to meet combined domestic and export order volumes without overtime. The ES-6C114 at 6-cavity output increased production capacity by approximately 50% at the same 114mm mold-close standard and same container specifications, without requiring new mold tooling for the existing validated bottle specifications.

“50% more capacity, same mold-close standard, same bottle specs. Upgrading to 6 cavities was the most capital-efficient way to serve the export growth. We didn’t need new molds — just the output step-up the ES-6C114 gave us.”

Application: 1-litre and 1.5-litre PET water and fruit drink bottles for a Riyadh-based beverage bottler distributing through Saudi retail and food service channels.

Problem solved: The bottler’s 1.5-litre volume requirement combined with a mid-format body diameter specification ruled out the ES-6C76 (700ml maximum) and positioned the ES-6C114 as the correct 6-cavity selection. The ES-6C114’s 6-cavity output at 1,500ml volume met the bottler’s combined 1L and 1.5L production volume from a single machine, eliminating the need to run two separate 4-cavity machines at this container size tier.

“1.5 litres ruled out the ES-6C76. 6 cavities ruled out the ES-4C114. The ES-6C114 was the only machine that hit both requirements — volume and cavity count — in one specification.”

Application: 500ml, 1-litre, and 1.5-litre PET cleaning chemical and personal care bottles for an Australian contract packaging company serving FMCG household chemical brands and personal care clients.

Problem solved: The contract packager served a growing client portfolio across chemical and personal care categories, all requiring 94mm body diameter containers at volumes up to 1.5 litres. The ES-6C114’s 6-cavity output across the 500ml–1,500ml range served the full client portfolio from a single machine installation, reducing machine count from three separate 4-cavity machines previously used to one 6-cavity installation at higher combined output.

“Three 4-cavity machines became one 6-cavity machine. Same combined output, one installation, one utility connection, one maintenance programme. The ES-6C114 was the consolidation play — and it covered every client in our portfolio.”