EP-HGA.ES-4C130 Automatic PET Blow Molding Machine — 1500ml, 4 Cavity, Highest Output Standard ES 4-Cavity

4,600 bph at 1,500ml — Series Volume Leader

The ES-4C130 delivers 4,600 bph at 1,500ml — the same output rate as the ES-4C100 at 800ml, but at nearly double the container volume. The net result is 6,900 litres of container volume per hour, the highest volume-per-hour output in the standard ES-4C series. For food and beverage producers measuring output in litres, this metric is more relevant than bottles-per-hour alone.

130mm Mold Close — 110mm Body, 1,500ml

The 130mm blow mold close enables 110mm maximum body diameter at 1,500ml volume — the standard dimensional configuration for full-size cosmetic pump dispensers, 1.5-litre water and beverage bottles, edible oil bottles, and standard food condiment containers globally. This is the most universally applicable dimensional specification in the mid-format 4-cavity tier.

Six-Industry Full Coverage

The ES-4C130’s dimensional envelope covers all six industry categories served by the ES series at 1,500ml: cosmetic and daily chemical, food and wide-mouth, water and beverage, pharmaceutical, edible oil, and chemical and pesticide. No other standard 4-cavity machine in the ES series covers all six industries at 1,500ml volume from a single configuration.

108-Position Preform Holder

The 108-position preform holder — the largest in the ES-4C series — provides the buffer depth required to sustain 4,600 bph output at 1,500ml without preform feed interruptions. At this output rate and container volume, preform consumption is approximately 77 per minute; the 108-position buffer provides approximately 1.4 minutes of reserve capacity above the consumption rate under normal operating conditions.

High-Capacity Servo System

The servo system at 4,600 bph and 1,500ml format operates with a common running power of approximately 30–35kW against an 85kW maximum heating capacity — reflecting the extended heating zone length required for 1,500ml preforms. The proportional energy efficiency advantage versus hydraulic-primary machines is most pronounced at this output level and container volume combination.

Food, Pharma & Chemical Process Compliance

Zero hand-contact automated production cycle satisfying GMP pharmaceutical, food-contact (FDA 21 CFR, EU 10/2011), and chemical packaging hygiene requirements simultaneously. The ES-4C130 is one of the few high-output RSBM machines that can serve regulated food, beverage, pharmaceutical, and chemical clients from a single installation without physical modification between production runs.

Cosmetic 500–1,500ml

Pump dispensers, body care, hair care

Food 500–1,500ml

Condiment, sauce, food service

Beverage 500–1,500ml

Water, juice, sports drink

Pharmaceutical 500–1,500ml

Syrups, OTC supplements

Edible Oil 500–1,500ml

Cooking oil, olive oil, specialty oil

Chemical 500–1,500ml

Agrochemical, cleaning agent

Application: 1,000ml and 1,500ml PET mineral water and functional beverage bottles for a major Indonesian beverage manufacturer supplying national distribution channels.

Problem solved: The manufacturer’s existing 2-cavity RSBM line was producing at 2,000 bph — sufficient for domestic supply but creating a production bottleneck during export expansion into Malaysia and Singapore. The ES-4C130 at 4,600 bph more than doubled production capacity, enabling the manufacturer to fulfil export commitments without reducing domestic supply or extending lead times.

“Export expansion was being blocked by production capacity. 4,600 bph removed the block. We supply domestic and export simultaneously now without any lead time compromise.”

Application: 1,000ml and 1,500ml PET cooking oil and canola oil bottles for a Mexican edible oil producer supplying retail chains across Mexico and Central America.

Problem solved: The producer was purchasing bottles from an external supplier at a per-unit cost that made the 1,500ml retail SKU unprofitable at regional pricing. Installing the ES-4C130 in-house reduced bottle cost by 31% per unit, restoring margin on the 1,500ml SKU and enabling the producer to lower retail price points to compete effectively in regional discount channels.

“The 1,500ml SKU was loss-making at external supplier prices. In-house production at 4,600 bph changed the economics completely. The SKU is now our highest-volume product.”

Application: Multi-industry contract production across cosmetics (1,000ml shampoo), food (1,500ml sauce), and edible oil (1,000ml rapeseed oil) for four brand clients from a single ES-4C130 installation.

Problem solved: The facility needed a single 4-cavity machine capable of serving four clients across three industries — an applicability requirement that the ES-4C114 could not meet at 1,500ml volume and that the ES-4C76 could not meet at 110mm body diameter. The ES-4C130 at 1,500ml and 6-industry coverage was the only configuration that satisfied all four client specifications from a single machine.

“Four clients, three industries, 1,500ml maximum volume. Only the ES-4C130 covered all four specifications from one machine. The business case required that coverage — the machine delivered it.”