Açıklama
European-Style Injection Blow Molding — 60 Tonne Class
Higher Clamping Force and Injection Weight in the BLOMA IBM50 Performance Class
The EP-ZQ60 is an independently engineered machine in the same tonnage class as the BLOMA IBM50 — cited here only to assist buyers in comparing specifications — delivering 600 kN clamping, 260/383 g injection weight and a smaller machine profile.
EP-ZQ60 vs BLOMA IBM50 — Specification Comparison
The BLOMA IBM50 is a 50-tonne class injection blow molding machine from Korea. The EP-ZQ60 is an independently engineered option in the same capacity class. BLOMA IBM50 figures are sourced from publicly available specification data. BLOMA is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parametre | BLOMA IBM50 | Ever Power EP-ZQ60 |
|---|---|---|
| Enjeksiyon Sıkıştırma Kuvveti | 500 kN | 600 kN |
| Vida Çapı | 50 mm | 45/50 mm |
| Enjeksiyon Ağırlığı | 240 g | 260/383 g |
| Kalıp Boyutu (Uzunluk x Genişlik) | 620 x 430 mm | 600 x 390 mm |
| Makine Boyutları (Uzunluk x Genişlik x Yükseklik) | 4.7 x 1.6 x 2.55 m | 3.8 x 1.4 x 1.8 m |
| Max Cavities — 10 ml | — | 14 |
| Kuru Döngü | — | 4 s |
| Toplam Güç | — | 37 kW |
BLOMA IBM50 reference figures sourced from publicly available specification data. BLOMA is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ60 Full Technical Specifications
The EP-ZQ60 sits one step above the ZQ40 in the Ever Power range. Compared to the BLOMA IBM50 class it delivers 20% higher injection clamping force, substantially more injection weight and a smaller machine envelope in all three dimensions — 0.9 m shorter, 0.2 m narrower and 0.75 m lower. See the full range at the IBM makinelerine genel bakış.
Enjeksiyon Sistemi
| Parametre | Birim | Değer |
|---|---|---|
| Vida Çapı | mm | 45 / 50 |
| Vida L/D Oranı | — | 22:1 |
| Enjeksiyon Ağırlığı | G | 260 / 383 |
| Isıtma Gücü | kW | 14 |
| Varil Bölgesi Sayısı | — | 3+N |
| Enjeksiyon Vuruşu | mm | 160 |
Sıkıştırma Sistemi
| Parametre | Birim | Değer |
|---|---|---|
| Enjeksiyon Sıkıştırma Kuvveti | kN | 600 |
| Enjeksiyon Açılış Vuruşu | mm | 140 |
| Darbe Sıkıştırma Kuvveti | kN | 100 |
| Üfleme Açılış Vuruşu | mm | 140 |
| Döner Tabla Kaldırma Yüksekliği | mm | 70 |
Kalıba dökmek
| Parametre | Birim | Değer |
|---|---|---|
| Maksimum Baskı Plakası Boyutu (Uzunluk x Genişlik) | mm | 600 x 390 |
| Kalıp Kalınlığı | mm | 240 |
| Maksimum Şişe Çapı | mm | 120 |
| Maksimum Şişe Yüksekliği | mm | 220 |
| Maksimum Şişe Hacmi | ml | 1 to 2000 |
| Sıyırma Vuruşu | mm | 230 |
Hidrolik Sistem ve Yardımcı Tesisler
| Parametre | Birim | Değer |
|---|---|---|
| Hidrolik Basınç | MPa | 14 |
| Motor Gücü | kW | 18.5 / 22 |
| Kuru Döngü | S | 4 |
| Toplam Güç | kW | 37 |
| Çalışma Gücü Oranı | % | 52 ila 70 |
| Minimum Hava Basıncı | MPa | 0,7 ila 1,2 |
| Sıkıştırılmış Hava Kapasitesi | m3/dak | 0.7 |
| Soğutma Suyu Akışı | m3/h | 4 |
| Soğutma Suyu Basıncı | MPa | 0,3 ila 0,4 |
| Makine Boyutları (Uzunluk x Genişlik x Yükseklik) | M | 3.8 x 1.4 x 1.8 |
| Net ağırlığı | ton | 5 |
Parametreler yalnızca referans amaçlıdır. Ever Power, teknik özellikleri önceden haber vermeksizin değiştirme hakkını saklı tutar.
Boşluk Yapılandırma Kılavuzu
The EP-ZQ60 delivers 14 cavities at 10 ml and 8 at 100 ml, serving high-volume pharmaceutical oral liquid and cosmetic packaging lines. At 500 ml, 3 cavities support efficient mid-volume production. The machine supports bottle volumes from 1 ml to 2000 ml — extending the upper range beyond the ZQ40.
| Hacim | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
|---|---|---|---|---|---|---|---|
| Maksimum Boşluklar | 14 | 12 | 10 | 8 | 5 | 3 | 2 |
Sadece referans amaçlıdır. Gerçek boşluk sayısı kalıp tasarımına ve şişe geometrisine bağlıdır.
Engineering Features of the EP-ZQ60
600 kN vs 500 kN — 20% Higher Clamping Force
The EP-ZQ60 provides 600 kN injection clamping force versus 500 kN for the BLOMA IBM50 — 20% higher — through a European-style pressurized clamping structure where the booster cylinder acts independently from mold-open and mold-close movements. This also lowers the hydraulic duty cycle per shot, reducing energy use relative to installed capacity.
Higher Injection Weight: 260/383 g vs 240 g
At 260 to 383 g versus 240 g for the BLOMA IBM50, the EP-ZQ60 supports heavier preforms — 8 to 60% more injection weight depending on screw choice. The 45 mm screw suits standard pharmaceutical and cosmetic resins; the 50 mm screw is optimised for higher-throughput HDPE and PP production at the upper volume range.
Substantially Smaller: 3.8 x 1.4 x 1.8 m vs 4.7 x 1.6 x 2.55 m
The EP-ZQ60 is 0.9 m shorter, 0.2 m narrower and 0.75 m lower than the BLOMA IBM50 class — a significant reduction across all three dimensions that simplifies installation in standard-height pharmaceutical clean rooms and constrained production floors, while maintaining a higher clamping force and injection weight.
Extended Volume Range to 2000 ml
The EP-ZQ60 supports bottle volumes from 1 ml to 2000 ml, extending beyond the ZQ40 and covering large household and food-service container formats alongside standard pharmaceutical and cosmetic vial sizes. Twin screw options provide flexibility across this extended range.
14 Cavities at 10 ml
With a 600 x 390 mm platen and 4-second dry cycle, the EP-ZQ60 supports up to 14 cavities at 10 ml — providing the per-shift output needed for pharmaceutical oral liquid vial production without stepping to the larger ZQ80 class.
Sıfır Atık Üç İstasyonlu Proses
Injection, blowing and stripping occur simultaneously in separate stations. No parting-line flash, no gate mark and no trim waste — material utilisation approaches 100% per cycle, particularly valuable when processing expensive engineering resins such as PCTG and PLA.
Başlıca Bileşenler ve Tedarikçi Kökenleri
The EP-ZQ60 uses the same internationally validated component supply chain as all ZQ-series machines. Schneider contactors from France, HALLITE seals from England, Festo air valves from Germany and Gefran position sensors from Italy combine with Hongxun servo drives from Taiwan for sustained reliability.
| HAYIR. | Bileşen | Tedarikçi | Köken |
|---|---|---|---|
| 1 | Bilgisayar | Hongxun | Tayvan |
| 2 | Yağ Pompası Servo Sürücüsü | Hongxun | Tayvan |
| 3 | Servo Motor | Fisi | İtalya |
| 4 | Yağ Pompası | Ekor | Almanya |
| 5 | Hidrolik Valf | Petrol Araştırması | Tayvan |
| 6 | Beş Yıldızlı Motor | Staver (Haitili) | Çin |
| 7 | Elektronik Cetvel | Gefran | İtalya |
| 8 | AC Kontaktör | Schneider | Fransa |
| 9 | Isıtma Rölesi | YANMING | Tayvan |
| 10 | O Tipi Halka | HALİT | İngiltere |
| 11 | Conta Halkası | HALİT | İngiltere |
| 12 | Seyahat Anahtarı | YANMING | Tayvan |
| 13 | Hava Anahtarı | Schneider | Fransa |
| 14 | Petrol Borusu | ISR | Amerika |
| 15 | Hava Valfi | Festo | Almanya |
| 16 | Servo Döner Motor | Huiçuan | Çin |
| 17 | PCS Karton | Mecano | Çin |
Parça tedarikçileri, bulunabilirlik durumuna bağlı olarak önceden haber verilmeksizin eşdeğer veya daha üstün alternatiflerle değiştirilebilir.
Uyumlu Malzemeler ve Endüstriyel Uygulamalar
The EP-ZQ60 handles the full ZQ material range with higher injection weight than the ZQ40, extending suitability to larger and heavier containers. High-clarity PCTG and PS are particularly relevant for cosmetic and nutraceutical packaging in this machine class.
İşlenebilir Malzemeler
Cosmetic Packaging
Serum vials, lotion bottles, essence containers, transparent PCTG cosmetic packaging
İlaç
Syrup bottles, oral liquid containers, vitamin supplement jars, nasal wash bottles
Nutraceutical
Protein supplement containers, collagen bottles, vitamin and wellness packaging
Yiyecek ve İçecek
Honey jars, condiment bottles, edible oil containers, infant nutrition packaging
Mold Design for the EP-ZQ60
The EP-ZQ60 max platen of 600 x 390 mm is closely comparable to the 620 x 430 mm of the BLOMA IBM50 class, enabling similar multi-cavity mold arrangements using purpose-designed Ever Power ZQ60 tooling. Injection mold bodies use 4Cr13 stainless or S136 alloy steel, with optional magnesium-aluminium blow mold bodies for high-speed pharmaceutical production.
Comparable Platen to BLOMA IBM50
At 600 x 390 mm the EP-ZQ60 platen closely matches the 620 x 430 mm of the BLOMA IBM50, enabling comparable cavity layout strategies using ZQ60-specific Ever Power tooling.
S136 ve 4Cr13 Çelik
Injection mold bodies are machined from imported S136 high-strength alloy or 4Cr13 stainless steel. Blow mold bodies are available in magnesium-aluminium alloy for improved thermal conductivity and shorter cooling times.
100% Neck Seal Integrity
Bottle neck and thread dimensions machined to tolerance for 100% cap seal engagement across all cavities. No flash on bottle mouth or base. Weight, wall thickness and dimensions are consistent across the full mold.
Üretim Hattı Entegrasyonu
The EP-ZQ60 operates as the central machine in a complete bottle production line. Ever Power supplies whole-line turnkey proposals covering upstream material handling and downstream labelling, filling, capping and packing for both new installations and capacity expansion projects. View the full IBM machine range at the IBM makinelerine genel bakış.
Sıkça Sorulan Sorular
İlgili IBM Makineleri
Sourcing an alternative to the BLOMA IBM50?
Detaylı teknik özellikler ve rekabetçi fiyat teklifi için ekibimizle iletişime geçin.
