Açıklama
European-Style Injection Blow Molding — 80 Tonne Class
Higher Clamping Force and Single-Screw Simplicity in the BLOMA IBM85 Performance Class
The EP-ZQ80 is an independently engineered machine in the same tonnage class as the BLOMA IBM85 — cited here only to assist buyers in comparing specifications — delivering 800 kN clamping, 466 g injection weight from a single 55 mm screw and a significantly smaller machine envelope.
EP-ZQ80 vs BLOMA IBM85 — Specification Comparison
The BLOMA IBM85 is an 80-tonne class injection blow molding machine from Korea. The EP-ZQ80 is an independently engineered option in the same capacity class. BLOMA IBM85 figures are sourced from publicly available specification data. BLOMA is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parametre | BLOMA IBM85 | Ever Power EP-ZQ80 |
|---|---|---|
| Enjeksiyon Sıkıştırma Kuvveti | 700 kN | 800 kN |
| Vida Çapı | 50 mm | 55 mm |
| Enjeksiyon Ağırlığı | 310/280 g | 466 g |
| Kalıp Boyutu (Uzunluk x Genişlik) | 620 x 430 mm | 800 x 400 mm |
| Makine Boyutları (Uzunluk x Genişlik x Yükseklik) | 4.7 x 1.6 x 2.55 m | 4.5 x 1.6 x 2 m |
| Max Cavities — 10 ml | — | 20 |
| Kuru Döngü | — | 4 s |
| Toplam Güç | — | 55 kW |
BLOMA IBM85 reference figures sourced from publicly available specification data. BLOMA is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ80 Full Technical Specifications
The EP-ZQ80 offers 800 kN clamping force and 466 g injection weight from a single 55 mm screw — 14% more clamping force and 50% more injection weight than the BLOMA IBM85 class — while fitting a shorter and lower machine envelope. From this class upwards the high-precision angle divider and dual hydraulic system are standard. See the full range at the IBM makinelerine genel bakış.
Enjeksiyon Sistemi
| Parametre | Birim | Değer |
|---|---|---|
| Vida Çapı | mm | 55 |
| Vida L/D Oranı | — | 22:1 |
| Enjeksiyon Ağırlığı | G | 466 |
| Isıtma Gücü | kW | 11 |
| Varil Bölgesi Sayısı | — | 4+N |
| Enjeksiyon Vuruşu | mm | 180 |
Sıkıştırma Sistemi
| Parametre | Birim | Değer |
|---|---|---|
| Enjeksiyon Sıkıştırma Kuvveti | kN | 800 |
| Enjeksiyon Açılış Vuruşu | mm | 140 |
| Darbe Sıkıştırma Kuvveti | kN | 120 |
| Üfleme Açılış Vuruşu | mm | 140 |
| Döner Tabla Kaldırma Yüksekliği | mm | 70 |
Kalıba dökmek
| Parametre | Birim | Değer |
|---|---|---|
| Maksimum Baskı Plakası Boyutu (Uzunluk x Genişlik) | mm | 800 x 400 |
| Kalıp Kalınlığı | mm | 280 |
| Maksimum Şişe Çapı | mm | 120 |
| Maksimum Şişe Yüksekliği | mm | 220 |
| Maksimum Şişe Hacmi | ml | 1 to 2000 |
| Sıyırma Vuruşu | mm | 230 |
Hidrolik Sistem ve Yardımcı Tesisler
| Parametre | Birim | Değer |
|---|---|---|
| Hidrolik Basınç | MPa | 14 |
| Motor Gücü | kW | 18.5 + 18.5 |
| Kuru Döngü | S | 4 |
| Toplam Güç | kW | 55 |
| Çalışma Gücü Oranı | % | 52 ila 70 |
| Minimum Hava Basıncı | MPa | 0.8 to 1.2 |
| Sıkıştırılmış Hava Kapasitesi | m3/dak | 0.8 |
| Soğutma Suyu Akışı | m3/h | 4 |
| Soğutma Suyu Basıncı | MPa | 0,3 ila 0,4 |
| Makine Boyutları (Uzunluk x Genişlik x Yükseklik) | M | 4.5 x 1.6 x 2 |
| Net ağırlığı | ton | 10 |
Parametreler yalnızca referans amaçlıdır. Ever Power, teknik özellikleri önceden haber vermeksizin değiştirme hakkını saklı tutar.
Cavity Output by Bottle Volume
The EP-ZQ80 reaches 20 cavities at 10 ml and 12 at 100 ml. The 800 x 400 mm platen is 180 mm longer than the BLOMA IBM85 class platen of 620 x 430 mm, providing significantly more horizontal layout space for high-cavity mold configurations at 10 and 30 ml.
| Hacim | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
|---|---|---|---|---|---|---|---|
| Maksimum Boşluklar | 20 | 18 | 14 | 12 | 8 | 5-6 | 3-4 |
Sadece referans amaçlıdır. Gerçek boşluk sayısı kalıp tasarımına ve şişe geometrisine bağlıdır.
Engineering Features of the EP-ZQ80
800 kN vs 700 kN — 14% Higher Clamping Force
The EP-ZQ80 provides 800 kN injection clamping force versus 700 kN for the BLOMA IBM85 — approximately 14% higher — through the European-style pressurized booster cylinder that acts independently from mold-open and mold-close, delivering higher force while reducing energy use per cycle.
466 g vs 310/280 g — 50% More Injection Weight
The BLOMA IBM85 provides 280 to 310 g injection weight. The EP-ZQ80 delivers 466 g from a single 55 mm screw — approximately 50% higher — enabling heavier preforms for larger bottles and higher-density resins without stepping up to a larger machine class.
Shorter and Lower: 4.5 x 1.6 x 2 m vs 4.7 x 1.6 x 2.55 m
At the same width as the BLOMA IBM85, the EP-ZQ80 is 0.2 m shorter in length and 0.55 m lower in height. The reduced height is particularly valuable in pharmaceutical clean rooms and standard industrial buildings where ceiling clearance below 2.1 m is common.
Wider Platen: 800 x 400 mm vs 620 x 430 mm
The EP-ZQ80 platen is 180 mm longer than the BLOMA IBM85 class, providing substantially more horizontal layout space. This enables the 20-cavity configuration at 10 ml and supports wider-format mold designs at all bottle sizes that would not fit within the shorter BLOMA platen footprint.
Standard High-Precision Angle Divider
Standard from the ZQ80 class upwards, the angle divider synchronises mold-open and turret-lift throughout every cycle, eliminating positional drift at 20-cavity production rates and maintaining consistent gram-weight distribution across all positions during extended shifts.
Dual Hydraulic Circuits — Standard from ZQ80
Two independent 18.5 kW hydraulic circuits power injection-clamping and blow-clamping separately, reducing the duty cycle of each motor. Operating power runs at 52 to 70% of the 55 kW installed capacity under standard production conditions, lowering energy cost per thousand bottles.
Başlıca Bileşenler ve Tedarikçi Kökenleri
The EP-ZQ80 dual hydraulic circuits require precision sealing. HALLITE O-rings and seal rings from England are specified for both circuits. Festo pneumatic valves from Germany manage blowing air distribution across 20 cavities. Gefran position sensors from Italy support the high-precision angle divider at sustained production rates.
| HAYIR. | Bileşen | Tedarikçi | Köken |
|---|---|---|---|
| 1 | Bilgisayar | Hongxun | Tayvan |
| 2 | Yağ Pompası Servo Sürücüsü | Hongxun | Tayvan |
| 3 | Servo Motor | Fisi | İtalya |
| 4 | Yağ Pompası | Ekor | Almanya |
| 5 | Hidrolik Valf | Petrol Araştırması | Tayvan |
| 6 | Beş Yıldızlı Motor | Staver (Haitili) | Çin |
| 7 | Elektronik Cetvel | Gefran | İtalya |
| 8 | AC Kontaktör | Schneider | Fransa |
| 9 | Isıtma Rölesi | YANMING | Tayvan |
| 10 | O Tipi Halka | HALİT | İngiltere |
| 11 | Conta Halkası | HALİT | İngiltere |
| 12 | Seyahat Anahtarı | YANMING | Tayvan |
| 13 | Hava Anahtarı | Schneider | Fransa |
| 14 | Petrol Borusu | ISR | Amerika |
| 15 | Hava Valfi | Festo | Almanya |
| 16 | Servo Döner Motor | Huiçuan | Çin |
| 17 | PCS Karton | Mecano | Çin |
Parça tedarikçileri, bulunabilirlik durumuna bağlı olarak önceden haber verilmeksizin eşdeğer veya daha üstün alternatiflerle değiştirilebilir.
Uyumlu Malzemeler ve Endüstriyel Uygulamalar
The 466 g single-screw injection weight of the EP-ZQ80 serves HDPE and PP containers in the 250 to 2000 ml range particularly well. The 4+N barrel zone configuration maintains consistent melt temperature across the full material selection at 20-cavity output rates.
İşlenebilir Malzemeler
İlaç
High-cavity vial lines, oral liquid bottles, wide-mouth tablet jars, nasal wash containers
Personal Care
High-volume shampoo, conditioner, body lotion and hand wash bottle production
Food and Supplements
Protein powder jars, edible oil bottles, sports nutrition, condiment containers
Chemical and Industrial
Cleaning products, agrochemical containers, laboratory reagent bottles
Mold Design for the EP-ZQ80
The 800 x 400 mm EP-ZQ80 platen is 180 mm longer than the 620 x 430 mm of the BLOMA IBM85 class, enabling significantly wider mold layouts. Injection mold bodies are machined from 4Cr13 stainless or S136 alloy steel, with optional magnesium-aluminium blow bodies for faster thermal cycling at 20-cavity production rates.
180 mm Wider Than BLOMA IBM85 Platen
At 800 mm the EP-ZQ80 platen length is 180 mm greater than the 620 mm of the BLOMA IBM85, providing significantly more horizontal cavity layout space for the 20-cavity configuration at 10 ml.
4+N Barrel Zones
Four independently controlled heating zones provide consistent melt temperature management across the 55 mm screw length, reducing thermal variation between cavities at sustained 20-cavity output rates.
Zero Scrap at All Cavity Counts
No gate mark, no parting flash and no runner trim at any cavity count. At 20 cavities running HDPE pharmaceutical vials, material savings versus extrusion blow molding are substantial across a full production shift.
Üretim Hattı Entegrasyonu
The EP-ZQ80 suits high-throughput production lines requiring matched downstream capacity at 20 cavities. Ever Power provides complete turnkey line proposals including equipment sizing, layout and installation support for both new installations and expansion projects alongside existing infrastructure. See the full IBM machine range at the IBM makinelerine genel bakış.
Sıkça Sorulan Sorular
İlgili IBM Makineleri
Sourcing an alternative to the BLOMA IBM85?
Detaylı teknik özellikler ve rekabetçi fiyat teklifi için ekibimizle iletişime geçin.
