Açıklama
EP-HGY250-V4-B Dual-Row 4-Station One-Step Injection Stretch Blow Molding Machine Overview
O EP-HGY250-V4-B is a specialised dual-row 4-station one-step injection stretch blow molding machine engineered specifically to maximise production output for small-to-medium plastic containers. By arranging cavities in two parallel rows within the same machine cycle, the EP-HGY250-V4-B achieves cavity counts of up to 28 cavities per cycle — a throughput level that would otherwise require two separate ISBM machines operating in parallel.
This dual-row architecture is paired with a 680g theoretical injection volume (60mm screw), providing the shot capacity to fill all 28 preform positions in a single injection cycle. The machine’s three servo pump systems deliver precise, energy-responsive hydraulic control across all stations, while Italian-sourced hydraulic tubing and YUKEN control valves ensure long-term reliability at continuous high-cycle production rates.
The EP-HGY250-V4-B targets manufacturers producing high volumes of small containers — including pharmaceutical tablet bottles, cosmetic sample vials, travel-size personal care containers, and eye-drop bottles — where output per hour is the primary production economics driver. At 82.7KW total power and 16 tonnes, it delivers industrial-scale throughput in a single-machine footprint. Compare models on our ISBM makinelerine genel bakış.
| Parametre | Özellikler |
|---|---|
| Model | EP-HGY250-V4-B |
| İstasyonlar | 4-Station |
| Machine Configuration | Dual-Row |
| Uygulanabilir Malzeme | PET / PETG |
| Tahrik Sistemi | 3-set servo pump system |
| Maksimum Boşluklar | Up to 28 (dual-row) |
| Maksimum Şişe Hacmi | 1.000 ml |
| Makine Ağırlığı | 16 T |
| Toplam Güç | 82.7 KW |
| Theoretical Injection Volume (60mm screw) | 480 cm³ / 680g |
Dual-Row 4-Station Process Architecture
In the dual-row configuration, the injection station mould contains two parallel rows of cavities — both rows are injected in a single shot. The temperature conditioning station maintains both rows simultaneously, and the blow station produces both rows in the same blow cycle. The take-out system retrieves all bottles from both rows in a single automated operation. This architecture doubles the effective cavity count without increasing machine cycle time, directly doubling production output versus an equivalent single-row configuration.
The turntable is driven by a Japan Yaskawa servo motor with Taiwan TSUNTIEN reducer. YUKEN hydraulic pressure control valves (Taiwan) manage the injection and blow clamping circuits. Italian-imported hydraulic tubing throughout the circuit provides the burst pressure integrity and vibration resistance required for continuous high-cycle operation.
Core Technical Advantages — EP-HGY250-V4-B Dual-Row ISBM
28-Cavity Dual-Row Output
The dual-row cavity layout achieves up to 28 cavities per production cycle — matching the output of two conventional single-row ISBM machines while occupying a single machine footprint and requiring only one operator. For high-volume small-bottle production, this represents a fundamental improvement in output per m² of factory floor space.
680g Injection Volume (60mm Screw)
The 680cm³ theoretical injection volume with the 60mm screw option provides the shot capacity to fill all dual-row preform positions in a single injection cycle. This large shot volume, combined with the machine’s 300KN injection clamping force, ensures uniform melt distribution and consistent preform weight across all 28 cavity positions.
Servo Pump Energy Efficiency
Three independent servo pump systems deliver precise hydraulic flow on demand — consuming power only when actuators are in motion. At the high cycle rates inherent in 28-cavity production, this demand-responsive architecture delivers meaningful energy cost savings compared to fixed-speed hydraulic pump systems operating at equivalent output.
15KW Nano Far-Infrared Heating
The screw and barrel assembly uses a 15KW nano far-infrared energy-saving heating ring. The higher heating capacity reflects the machine’s large-volume barrel assembly and ensures uniform melt temperature across the full 680g injection volume — critical for consistent preform quality across all 28 dual-row cavity positions.
Single-Machine Dual-Line Economics
Running 28 cavities on one machine eliminates the capital cost, utility connections, floor space, and operator headcount that would be required for a second ISBM machine. The dual-row configuration also simplifies quality management — one machine, one process parameter set, one operator, one maintenance schedule.
Italian-Import Hydraulic Circuit
All hydraulic lines use Italian-sourced high-pressure tubing providing superior burst pressure ratings and long-term vibration fatigue resistance. In a machine operating at the high cycle rates of 28-cavity production, circuit integrity and consistent hydraulic response are non-negotiable — Italian-grade tubing delivers both.
Complete Technical Specifications — EP-HGY250-V4-B
| Parametre | Özellikler |
|---|---|
| Makine Adı | One-Step Injection Stretch Blow Molding Machine (4-Station) |
| Model | EP-HGY250-V4-B (Dual-Row) |
| Uygulanabilir Malzeme | PET / PETG |
| Vida Çapı Seçenekleri | 50 / 55 / 60 mm |
| Teorik Enjeksiyon Hacmi | 315 / 442 / 480 cm³ |
| Vidanın Dönme Hızı | 270 / 180 / 150–220 RPM |
| Enjeksiyon Sıkıştırma Kuvveti | 300 KN |
| Üfleme Sıkıştırma Kuvveti | 250 KN (single side) |
| Üst Kalıp Vuruşu | 600 mm |
| Sıcaklık. Temel Vuruşun Düzenlenmesi | 250 mm |
| Sıcaklık. Namlu Vuruşunu Düzenleme | 250 mm |
| Çıkarma Vuruşu | 200 mm |
| Üfleme Çekirdek Vuruşu | 300 mm |
| Şişirme Kalıplama Vuruşu | 75 + 75 mm |
| Motor Gücü | 67.7 KW |
| Isıtma Gücü | 15 KW |
| Toplam Makine Gücü | 82.7 KW |
| Üfleme Hava Basıncı | 2,0 – 3,5 MPa |
| Soğutma Suyu Basıncı | 0,4 – 0,6 MPa |
| Makine Yağ Soğutucusu Su Basıncı | 0,3 – 0,4 MPa |
| Makine Yağ Soğutucu Su Sıcaklığı. | 20 – 25 °C |
| Petrol Tankı Hacmi | 300 L |
| Gerilim | 370 – 400 V |
| Makine Boyutları (U×G×Y) | 5200 × 2500 × 3800 mm |
| Makine Ağırlığı | 16 T |
Dual-Row Producible Bottle Specifications by Cavity Count
| Cavities (PCS) | 8 | 10 | 12 | 14 | 16 | 20 | 24 | 28 |
|---|---|---|---|---|---|---|---|---|
| Şişe Çapı (mm) | 85 | 85 | 79 | 66 | 54 | 45 | 37 | 25 |
| Şişe Yüksekliği (mm) | 260 | 260 | 260 | 260 | 260 | 260 | 260 | 260 |
| Boyun Çapı (mm) | 58 | 56 | 48 | 38 | 32 | 26 | 24 | 15 |
| Maksimum Hacim (ml) | 1000 | 900 | 800 | 600 | 400 | 250 | 100 | 50 |
| Maksimum Ağırlık (g) | 55 | 44 | 36 | 32 | 28 | 25 | 20 | 15 |
High-Volume Small-Bottle Application Industries
The EP-HGY250-V4-B dual-row configuration is purpose-built for manufacturers where small-container production volume is the primary production economics driver:
Pharmaceutical Small-Dose Bottles
High-volume production of 50ml–250ml pharmaceutical tablet, capsule, and liquid medicine bottles at 12–20 cavities per cycle. The dual-row process ensures consistent preform thermal conditioning across all cavity positions — critical for the dimensional tolerances required by pharmaceutical tamper-evident and child-resistant closure systems.
Cosmetic Sample & Travel Vials
Travel-size and sample-format cosmetic bottles in 50ml–100ml sizes at 20–28 cavities per cycle. The dual-row ISBM process produces high-clarity PETG vials with the optical quality demanded by prestige cosmetic brands — at production rates that make sample programme economics viable.
️ Eye Drop & Ophthalmic Bottles
Small-volume 5ml–30ml eye drop and nasal spray containers at high cavities per cycle. The zero-contact ISBM production cycle is inherently suited to ophthalmic packaging cleanliness requirements. The 28-cavity maximum enables the production volumes required for cost-competitive ophthalmic packaging supply.
Travel Personal Care Containers
Travel-size shampoo, conditioner, lotion, and shower gel bottles in 50ml–100ml at maximum dual-row cavity counts. FMCG brands producing hotel amenity collections and travel retail packaging benefit from the dual-row machine’s ability to achieve competitive unit economics at these small volumes.
Mould Design for Dual-Row Configuration
Dual-row ISBM moulds require careful engineering to ensure uniform melt distribution across both rows during injection and consistent thermal conditioning across all preform positions between stations. Ever Power’s mould engineering team specialises in dual-row mould design — including hot runner manifold layout, thermal pin positioning, and blow cavity alignment — to ensure that cavity-to-cavity dimensional variation across all 28 positions meets specification requirements. New dual-row mould development includes comprehensive first-article inspection across all cavity positions and a production trial run with statistical sampling from all rows and positions.
ISBM Makineniz İçin Neden Ever Power'ı Seçmelisiniz?
Ever Power, sunduğu avantajlarla öne çıkıyor. ISBM makinelerinin 20 yıllık özverili araştırma, üretim ve küresel dağıtım deneyimi. Ürettiğimiz her makineye. Kaliteye, inovasyona ve müşteri desteğine olan bağlılığımız dört temel sütunda yansıtılmaktadır:
Dikey Entegre Üretim
Ever Power, ISBM makinesinin tüm tedarik zincirini kontrol eder; servo entegrasyonu, hidrolik montaj, kalıp takım üretimi ve son kabul testleri tamamen şirket içinde gerçekleştirilir. Bu, üçüncü taraf kalite farklılıklarını ortadan kaldırır, teslim sürelerini kısaltır ve makinedeki her bileşen için doğrudan satış sonrası destek sağlar.
Patentli Teknoloji Portföyü
ISBM'nin yirmi yıllık yoğun Ar-Ge çalışmaları, servo kontrol mimarileri, enerji tasarruflu nano uzak kızılötesi ısıtma ve çift servo kalıp sıkıştırma sistemlerini kapsayan, ulusal düzeyde tanınan birçok patente imza atmıştır. Bu yenilikler her makineye entegre edilmiştir ve müşterilere, eşdeğer Ar-Ge yatırımı yapmayan üreticilerden elde edilemeyen performans avantajları sağlamaktadır.
Sektörler Genelinde Küresel Başarı Geçmişi
Ever Power makineleri, Avrupa, Kuzey Amerika, Güney Amerika ve Asya'daki üretim hatlarında; ilaç GMP ortamlarında, lüks kozmetik tesislerinde, büyük boy su şişesi üretiminde ve hızlı tüketim kişisel bakım tesislerinde çalışmaktadır. Müşteri tabanımızda, uzun vadeli makine güvenilirliği ve servis taahhüdü nedeniyle Ever Power'ı tercih eden uluslararası alanda tanınmış markalar bulunmaktadır.
Proje Yaşam Döngüsünün Tamamına Destek
Uygulama fizibilitesinden kalıp tasarımına, devreye alma, operatör eğitimi ve sürekli yedek parça tedarikine kadar Ever Power, tek elden proje desteği sunmaktadır. Şirket içi kalıp üretimimiz, aletlerin ilk günden itibaren genel bir tasarımdan uyarlanmak yerine, makineye özel olarak tasarlanmasını sağlar.
Her makine, sevkiyat öncesinde titiz fabrika kabul testlerine tabi tutulur; bu testler servo eksen kalibrasyonunu, sıcaklık kontrolü doğrulamasını, kalıp deneme üretimini ve boyut çıktısı ölçümünü kapsar. Ever Power'ın üretim yetenekleri hakkında daha fazla bilgi edinin.
Customer Case Studies — EP-HGY250-V4-B
Germany — Pharmaceutical Packaging
Pharma | 100ml tablet bottles, 20-cavity dual-row production
“We needed to triple our pharmaceutical bottle output without adding a second production line. The EP-HGY250-V4-B’s 20-cavity dual-row configuration achieved that on a single machine footprint. Quality consistency across all 20 cavity positions was validated in our first qualification run — dimensional variation between rows was within 0.08mm, comfortably within our specification.”
★★★★★
Japan — Cosmetics Brand
Cosmetics | 50ml PETG serum sample vials, 28-cavity dual-row
“Our sample programme requires millions of 50ml vials per season. The 28-cavity dual-row machine was the only single-machine solution that could meet our volume targets without a second ISBM unit. The PETG clarity from the dual-row ISBM process is indistinguishable from our main-line serum bottle — critical for maintaining brand consistency in sample packaging.”
★★★★★
United Kingdom — Ophthalmic Packaging
Pharma/Medical | 10ml eye drop bottles, 24-cavity dual-row
“The combination of ISBM zero-contact production and 24-cavity dual-row output resolved both our cleanliness requirements and our capacity bottleneck simultaneously. Our previous single-row 8-cavity machine was our line constraint — the EP-HGY250-V4-B runs 24 cavities with the same operator and the same floor space. We tripled output and improved cleanliness compliance.”
★★★★★
South Korea — Travel Retail
Personal Care | 30ml–100ml travel amenity set bottles, 20–28 cavity dual-row
“Hotel amenity packaging requires extremely consistent bottle dimensions for automated filling line fitment. The dual-row ISBM process on the EP-HGY250-V4-B gives us that consistency across all cavity positions at volumes that make hotel amenity supply commercially viable. We supply four international hotel chains from this single machine.”
★★★★☆
Frequently Asked Questions — EP-HGY250-V4-B
How does the dual-row configuration achieve higher cavity counts without increasing cycle time?
In a dual-row ISBM machine, both rows of cavities are processed simultaneously at every station — injection, temperature conditioning, blow molding, and take-out all operate on both rows in the same cycle. The turntable rotates once per cycle regardless of whether there are 8 or 28 total cavities across the two rows. The result is that cavity count doubles with no change in cycle time — directly doubling production output from the same machine operating at the same cycle rate.
How does cavity-to-cavity consistency compare between single-row and dual-row machines?
Maintaining consistent preform weight, temperature, and wall thickness across 28 positions in a dual-row configuration requires careful hot runner manifold design and thermal conditioning system layout. Ever Power’s dual-row mould engineering addresses this through balanced manifold design and independent thermal conditioning pin circuits for each cavity position. First-article inspection across all 28 positions is included in every dual-row mould qualification to verify inter-cavity dimensional consistency.
What is the minimum bottle size the EP-HGY250-V4-B can produce in dual-row mode?
The minimum producible bottle in the dual-row configuration is a 25mm body diameter, 15mm neck diameter container with a maximum volume of 50ml and a maximum weight of 15g (28-cavity configuration). This represents the practical lower bound for the ISBM process in terms of preform size and blow-up ratio. For containers smaller than this specification, alternative packaging processes such as injection blow molding (IBM) without the stretch step may be more appropriate — contact our applications team to discuss.
Can the EP-HGY250-V4-B run in single-row mode if needed?
Yes. The machine can be configured with single-row moulds when the full 28-cavity output is not required — for instance, during product development, small trial runs, or when running larger bottle sizes that do not fit the dual-row cavity layout. Single-row operation uses the same machine platform with a single-row mould installed — no machine reconfiguration is required beyond the mould change itself.
What compressed air and utility requirements does this machine have?
The EP-HGY250-V4-B requires: Power supply 370–400V / 3-phase (82.7KW total connected load); High-pressure compressed air at 2.0–3.5 MPa from a dedicated high-pressure compressor (sold separately); Cooling water at 0.4–0.6 MPa inlet pressure, temperature below 25°C; Machine oil cooler water at 0.3–0.4 MPa, temperature 20–25°C; Floor loading capacity minimum 2T/m² beneath the machine footprint area. Detailed installation drawings and utility specification sheets are provided upon order confirmation.
Double Your Small-Bottle Output on a Single Machine
The EP-HGY250-V4-B’s dual-row 28-cavity configuration delivers two production lines of output from one machine, one operator, and one footprint. For pharmaceutical, cosmetic, and personal care manufacturers scaling small-bottle production, it is the most capital-efficient ISBM solution available. Talk to our team about your volume targets and bottle specifications.
