คำอธิบาย
European-Style Injection Blow Molding — 80 Tonne Class
High-Output IBM Machine with Precision Angle Divider and Dual Hydraulic System
The EP-ZQ80 sits in the same tonnage class as the Jomar IBM85S — cited here only to assist buyers in comparing specifications — with a 55 mm screw, 800 kN clamping force and up to 20 cavities at 10 ml for high-volume bottle production.
EP-ZQ80 vs Jomar IBM85S — Specification Comparison
The Jomar IBM85S is a well-known 80-tonne class machine used widely in pharmaceutical and personal care packaging. The EP-ZQ80 is an independently engineered alternative in the same capacity class. The table below compares published specifications side by side. Jomar IBM85S data is sourced from publicly available materials. Jomar is referenced solely to assist buyers in equipment selection and is not affiliated with Ever Power.
| พารามิเตอร์ | Jomar IBM85S | Ever Power EP-ZQ80 |
|---|---|---|
| แรงยึดฉีด | 680 kN | 800 kN |
| เส้นผ่านศูนย์กลางของสกรู | 55 mm | 55 mm |
| น้ำหนักการฉีด | 300 g | 466 g |
| Max Cavities — 10 ml | — | 20 |
| Max Cavities — 100 ml | — | 12 |
| Machine Dimensions (L x W x H) | 3.33 x 1.94 x 3.41 m | 4.5 x 1.6 x 2 m |
| Dry Cycle | — | 4 วินาที |
| พลังงานทั้งหมด | — | 55 kW |
Jomar IBM85S reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ80 Full Technical Specifications
The EP-ZQ80 is the first model in the Ever Power ZQ series to feature a standard high-precision angle divider, enabling synchronised mold-open and turret-lift operation for improved cycle stability at higher cavity counts. With a single 55 mm screw and 466 g injection weight it handles larger preforms, and with 800 kN injection clamping force it delivers the highest output in its tonnage class. Explore the wider range at the IBM machines overview.
ระบบฉีด
| พารามิเตอร์ | Unit | EP-ZQ80 |
|---|---|---|
| เส้นผ่านศูนย์กลางของสกรู | mm | 55 |
| อัตราส่วน L/D ของสกรู | — | 22:1 |
| น้ำหนักการฉีด | g | 466 |
| กำลังความร้อน | kW | 11 |
| จำนวนโซนบาร์เรล | — | 4+N |
| การฉีดสตรัค | mm | 180 |
ระบบจับยึด
| พารามิเตอร์ | Unit | EP-ZQ80 |
|---|---|---|
| แรงยึดฉีด | kN | 800 |
| Injection Opening Stroke | mm | 140 |
| แรงยึดแบบเป่าลม | kN | 120 |
| Blow Opening Stroke | mm | 140 |
| ความสูงของแท่นหมุน | mm | 70 |
Mould
| พารามิเตอร์ | Unit | EP-ZQ80 |
|---|---|---|
| Max Platen Size (L x W) | mm | 800 x 400 |
| Mold Thickness | mm | 280 |
| Max Bottle Diameter | mm | 120 |
| Max Bottle Height | mm | 220 |
| Max Bottle Volume | ml | 1 to 2000 |
| จังหวะการลอก | mm | 230 |
Hydraulic System and Utilities
| พารามิเตอร์ | Unit | EP-ZQ80 |
|---|---|---|
| แรงดันไฮดรอลิก | MPa | 14 |
| กำลังมอเตอร์ | kW | 18.5 + 18.5 |
| Dry Cycle | s | 4 |
| พลังงานทั้งหมด | kW | 55 |
| อัตราส่วนกำลังการทำงาน | % | 52 to 70 |
| Min Air Pressure | MPa | 0.8 to 1.2 |
| ความจุอากาศอัด | m3/min | 0.8 |
| การไหลของน้ำหล่อเย็น | m3/h | 4 |
| แรงดันน้ำหล่อเย็น | MPa | 0.3 to 0.4 |
| Machine Dimensions (L x W x H) | m | 4.5 x 1.6 x 2 |
| น้ำหนักสุทธิ | ton | 10 |
Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.
Cavity Output by Bottle Volume
The EP-ZQ80 delivers the highest cavity counts in its class across all volume sizes. At 60 ml it runs 14 cavities per cycle, ideal for high-volume personal care and healthcare bottle lines. At 500 ml it supports 5 to 6 cavities, well-suited to cleaning agent and conditioner bottle production.
| ปริมาณ | 10 มล. | 30 มล. | 60 มล. | 100 มล. | 250 มล. | 500 มล. | 1000 ml |
|---|---|---|---|---|---|---|---|
| Max Cavities | 20 | 18 | 14 | 12 | 8 | 5-6 | 3-4 |
For reference only. Actual cavity count depends on mold design and bottle geometry.
Engineering Features of the EP-ZQ80
High-Precision Angle Divider
The EP-ZQ80 introduces the high-precision angle divider as a standard feature from this tonnage class upwards. It synchronises mold-open and turret-lift actions to the same precise moment, eliminating mechanical lag and improving dimensional consistency across high cavity counts.
Standard Dual Hydraulic System
From the ZQ80 onwards, dual hydraulic circuits are standard equipment. Each circuit operates independently, allowing simultaneous actions and improving overall cycle efficiency. This design reduces energy consumption by 20 to 30% compared with single-circuit machines in the same class.
800 kN Clamping — 18% Above IBM85S Class
At 800 kN the EP-ZQ80 provides approximately 18% more injection clamping force than the 680 kN of the Jomar IBM85S class. The higher clamping force supports larger preform footprints and tighter tolerances for wide-neck bottle formats.
466 g Injection Weight
At 466 g, the EP-ZQ80 injection weight is 55% higher than the 300 g of the IBM85S class, enabling heavier preforms for large-volume containers and wider bottle formats without the need to step up to a larger machine.
800 x 400 mm Platen — Wider Mold Area
The 800 x 400 mm max platen size accommodates wider mold layouts compared with the 600 x 390 mm of the ZQ60, enabling 20-cavity configurations at 10 ml and 18-cavity at 30 ml for sustained high-output production.
2 m Machine Height — Clean Room Compatible
At exactly 2 m, the EP-ZQ80 remains within standard industrial ceiling clearances and is compatible with pharmaceutical clean-room environments where overhead service runs and air handling systems often restrict available height.
Internationally Sourced Components
The EP-ZQ80 shares the same international supply chain as the full ZQ series. Dual hydraulic circuits require precision sealing components — HALLITE O-rings and seal rings from England are specified for both circuits. Festo air valves from Germany and Gefran electronic rulers from Italy deliver consistent measurement and actuation performance across the higher-power configuration.
| No. | Component | Supplier | Origin |
|---|---|---|---|
| 1 | Computer | Hongxun | Taiwan |
| 2 | Oil Pump Servo Driver | Hongxun | Taiwan |
| 3 | Servo Motor | Fisi | Italy |
| 4 | Oil Pump | Ekor | Germany |
| 5 | Hydraulic Valve | Oil Research | Taiwan |
| 6 | Five-Star Motor | Staver (Haitian) | China |
| 7 | Electronic Ruler | Gefran | Italy |
| 8 | A.C. Contactor | Schneider | France |
| 9 | Heating Relay | YANMING | Taiwan |
| 10 | O-Type Ring | HALLITE | England |
| 11 | Seal Ring | HALLITE | England |
| 12 | Travel Switch | YANMING | Taiwan |
| 13 | Air Switch | Schneider | France |
| 14 | Oil Pipe | ISR | USA |
| 15 | Air Valve | Festo | Germany |
| 16 | Servo Rotary Motor | Huichuan | China |
| 17 | PCS Carton | Mecano | China |
Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.
Material Compatibility and Target Industries
The EP-ZQ80 processes the same full range of thermoplastics as the ZQ40 and ZQ60, with the increased injection weight particularly beneficial for HDPE and PP containers in the 250 to 2000 ml range. Its high cavity count at smaller volumes makes it a natural fit for contract manufacturers producing multiple SKUs on a single machine.
Processable Materials
LDPE
พีพี
PS
ABS
EVA
PCTG
PLA (Bio)
Pharmaceutical
High-cavity vial lines, oral liquid bottles, tablet containers, wide-mouth jars
Personal Care
Shampoo, conditioner, body lotion, hand wash bottles in high volumes
Food and Supplements
Protein powder jars, edible oil bottles, sports nutrition, condiment containers
Chemical and Industrial
Cleaning products, agrochemical containers, laboratory reagent bottles
Mold Design for the EP-ZQ80
The wider 800 x 400 mm platen of the EP-ZQ80 enables multi-cavity mold layouts that are not achievable on smaller machines in the ZQ series. Injection mold bodies are machined from 4Cr13 stainless or imported S136 alloy steel. Blow mold bodies are available in magnesium-aluminium alloy for improved thermal performance at high cycle rates.
20-Cavity Mold Layout at 10 ml
The 800 x 400 mm platen supports up to 20 cavities at 10 ml — the highest count in the ZQ series at this volume — making the EP-ZQ80 the most productive option for pharmaceutical vial production within the 80-tonne class.
Optimised Hot Runner for 4+N Zones
The 4+N barrel zone configuration provides finer melt temperature control across a wider range of materials, reducing thermal variation between cavities and improving weight consistency across all 20 positions.
Zero Scrap at Full Cavity Count
The injection blow process produces no gate flash or parting-line waste at any cavity count. At 20 cavities running HDPE pharmaceutical vials, material savings versus extrusion blow molding are significant on a per-thousand-unit basis.
Production Line Integration
The EP-ZQ80 is suited to high-throughput production lines where downstream filling, inspection and packing must match the machine output rate at 20 cavities. Ever Power offers complete turnkey line configuration advice including conveyor speed matching, inspection machine throughput and packing machine selection.
Air Compressor
Mold Temperature Controller
Chiller
Packing Machine
Bottle Visual Inspection Machine
Auto Loader
Technical Questions — EP-ZQ80
Other IBM Machines in the EP-ZQ Series
Exploring alternatives to the Jomar IBM85S?
Get in touch with our team for a detailed specification sheet and competitive quote.
