EP-HGA.ES-2C100 Automatic PET Blow Molding Machine — 500ml, 2 Cavity, Cosmetic, Pharmaceutical, Water & Chemical Bottles

ES Direct-Blow Architecture

The ES-series uses a direct single-blow sequence — preform enters, heats, stretches, and blows in a single fluid motion without an intermediate expansion stage. This results in a faster cycle time per bottle compared to the AS pre-blow process, making the ES-2C100 the more productive choice for standard container geometries where marginal wall variation is acceptable within specification.

Multi-Material Compatibility

Compatible with PET, PETG, and other stretch-grade materials. The digital infrared heating system’s zone-by-zone temperature control allows the operator to set precise heating profiles for different resin types, enabling substrate switching through parameter recipe changes without physical modification to the machine.

2,400 bph Throughput at 2 Cavities

At 2,400 bottles per hour, the ES-2C100 is positioned for dedicated small-line production or as a secondary machine for product development and new SKU trials. For manufacturers considering capacity expansion, the ES series scales linearly to 4-cavity and 6-cavity configurations in the same product family.

Servo Motor Drive System

International-brand servo motors drive all motion axes — clamping, stretching, and take-out — replacing hydraulic actuation on equivalent legacy machines. The result is reduced energy consumption, quieter operation, lower maintenance frequency, and faster response times during acceleration and deceleration phases of each cycle.

Compact Footprint

At 2900 × 1525 × 1930mm and 2,000kg, the ES-2C100 is the lightest and most spatially efficient machine in the ES automatic series. This makes it practical for facilities with limited floor area, for pilot production environments, or for installation alongside existing production lines where machine footprint is a primary constraint.

Zero Hand-Contact Automated Cycle

The complete production cycle — from preform loading through finished bottle discharge — is fully automated with no manual intervention at any stage. This supports compliance with pharmaceutical GMP, food-contact hygiene standards, and personal care industry cleanliness requirements across all compatible bottle applications.

Cosmetic & Daily Chemical

Shampoo bottles, body lotion dispensers, face wash bottles, hand wash containers, and small toner or essence bottles in the 100–500ml range. The 80mm maximum body diameter covers the majority of standard pump-dispenser bottle formats in this volume bracket.

İlaç

Oral liquid medication bottles, vitamin supplement containers, and over-the-counter syrup bottles. The 68mm maximum neck diameter supports a wide range of pharmaceutical closure formats including child-resistant caps and tamper-evident closures in standard PCO and CT neck finishes.

Su ve İçecek

Small-format mineral water bottles and single-serve beverage containers up to 500ml. The machine’s output of 2,400 bph at 2 cavities is suited to artisanal or regional water brands with production volumes below the threshold justifying higher-cavity equipment investment.

Kimyasal ve Pestisit

Small-format chemical reagent bottles, pesticide concentrate containers, and laboratory supply bottles where PET’s chemical resistance, clarity, and dimensional consistency are required. The 68mm neck diameter supports wide-neck chemical closure formats including induction-seal and tamper-evident options.

Application: 300ml and 500ml PET shampoo and conditioner bottles for a regional personal care brand supplying domestic retailers in São Paulo and Rio de Janeiro.

Problem solved: The brand’s previous semi-automatic machine could not maintain consistent bottle weight at the 500ml fill level, causing overfill and underfill complaints from their retail filler partner. The ES-2C100’s automated cycle eliminated the operator-dependent weight variation, bringing fill-level consistency within their retail partner’s tolerance from day one of production.

“Our filler had been sending back overfill complaints every week. After the new machine, those complaints stopped completely in the first month. The bottle weight is consistent every cycle.”

Application: 250ml and 500ml PET pesticide concentrate bottles for an agrochemical product line registered with South Africa’s Department of Agriculture.

Problem solved: The facility needed to produce both 250ml and 500ml format bottles from the same machine within the same shift, switching between formats during production planning gaps. The ES-2C100’s digital recipe management supported format switching in under 2 hours, allowing both formats to run on a single machine without dedicated equipment for each SKU.

“Two formats, one machine, same shift. The changeover is clean and the chemical-resistance performance of the PET bottle meets our SANAS registration requirements.”

Application: 200ml and 400ml PETG vitamin supplement bottles for a nutraceutical brand supplying pharmacies and health food retailers across central Mexico.

Problem solved: The brand had been purchasing bottles from a third-party supplier with a 6-week lead time, creating inventory risk during promotional campaigns. Installing the ES-2C100 in-house reduced their bottle lead time to zero and reduced per-unit bottle cost by approximately 18% compared to external procurement at their production volume.

“Moving production in-house was the right decision. We control our own supply now, and the cost saving at our volume paid back the machine investment faster than we projected.”