الوصف
European-Style Injection Blow Molding — 40 Tonne Class
Compact High-Precision IBM Machine for Pharmaceutical and Cosmetic Packaging
An independently engineered machine in the same tonnage class as the Jomar IBM40 — cited here only to help buyers compare specifications — delivering higher clamping force and lower energy use through full European-style architecture.
EP-ZQ40 vs Jomar IBM40 — Specification Comparison
Buyers evaluating 40-tonne class IBM machines frequently compare the Jomar IBM40 against alternatives from multiple manufacturers. The table below sets key parameters side by side for direct technical assessment. Jomar IBM40 figures are drawn from publicly available data. Jomar is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| المعلمة | Jomar IBM40 | Ever Power EP-ZQ40 |
|---|---|---|
| قوة تثبيت الحقن | 340 kN | 400 كيلو نيوتن |
| قطر البرغي | 35/40 mm | 40/45 مم |
| وزن الحقنة | 180 g | 190/260 g |
| Max Cavities — 10 ml | — | 9 |
| Max Cavities — 100 ml | — | 4 |
| Machine Dimensions (L x W x H) | 2.72 x 1.9 x 2.75 m | 3.5 x 1.3 x 1.7 m |
| Dry Cycle | — | 3.5 ثانية |
| القوة الكاملة | — | 20 kW |
Jomar IBM40 reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ40 Full Technical Specifications
The EP-ZQ40 is the entry-level model in the Ever Power ZQ series. Designed for small-to-medium pharmaceutical and cosmetic bottle production, its 400 kN injection clamping force, 40/45 mm twin screw options and 3.5-second dry cycle deliver strong output within a compact 3.5 x 1.3 m floor area. Full specifications are grouped below by system.
نظام الحقن
| المعلمة | وحدة | EP-ZQ40 |
|---|---|---|
| قطر البرغي | مم | 40 / 45 |
| نسبة طول/قطر البرغي | — | 22:1 |
| وزن الحقنة | g | 190 / 260 |
| الطاقة الحرارية | kW | 7.5 |
| عدد مناطق البراميل | — | 3+ن |
| السكتة الدماغية الناتجة عن الحقن | مم | 120 |
نظام التثبيت
| المعلمة | وحدة | EP-ZQ40 |
|---|---|---|
| قوة تثبيت الحقن | kN | 400 |
| Injection Opening Stroke | مم | 165 |
| قوة التثبيت بالنفخ | kN | 60 |
| Blow Opening Stroke | مم | 140 |
| ارتفاع رفع الطاولة الدوارة | مم | 70 |
Mould
| المعلمة | وحدة | EP-ZQ40 |
|---|---|---|
| Max Platen Size (L x W) | مم | 480 x 340 |
| Mold Thickness | مم | 180 |
| Max Bottle Diameter | مم | 120 |
| Max Bottle Height | مم | 220 |
| أقصى سعة للزجاجة | مل | 1 to 1500 |
| ضربة التعرية | مم | 220 |
Hydraulic System and Utilities
| المعلمة | وحدة | EP-ZQ40 |
|---|---|---|
| الضغط الهيدروليكي | MPa | 14 |
| قوة المحرك | kW | 11 |
| Dry Cycle | s | 3.5 |
| القوة الكاملة | kW | 20 |
| نسبة الطاقة التشغيلية | % | 52 to 70 |
| Min Air Pressure | MPa | 0.7 to 1.2 |
| سعة الهواء المضغوط | m3/min | 0.7 |
| تدفق مياه التبريد | m3/h | 3.5 |
| ضغط ماء التبريد | MPa | 0.3 to 0.4 |
| Machine Dimensions (L x W x H) | m | 3.5 x 1.3 x 1.7 |
| الوزن الصافي | ton | 3.8 |
Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.
Cavity Configuration Guide
Cavity count is determined by bottle volume and mold design. At 10 ml, up to 9 cavities per cycle suit high-output pharmaceutical vial production. At 500 ml, 2 cavities per cycle match mid-volume cosmetic lotion bottle lines.
| مقدار | 10 مل | 30 مل | 60 مل | 100 مل | 250 مل | 500 مل | 1000 ml |
|---|---|---|---|---|---|---|---|
| الحد الأقصى للتسوس | 9 | 8 | 6 | 4 | 3 | 2 | 1 |
For reference only. Actual cavity count depends on mold design and bottle geometry.
Key Engineering Features
Full European-Style Structure
The all-European clamping architecture delivers 20 to 30% higher clamping force than comparable machines in the same tonnage class, providing greater preform stability and dimensional consistency across all cavities.
Standard Servo Rotary Drive
Servo-driven rotation comes as standard equipment, simplifying the mechanical structure, reducing operator setup time and eliminating the maintenance overhead of hydraulic rotary systems.
Pressurized Clamping System
The booster cylinder operates independently from mold-open and mold-close actions, reducing energy consumption by 10 to 20% compared with conventional single-circuit hydraulic clamping designs.
Compact Floor Footprint
At 3.5 x 1.3 x 1.7 m, the EP-ZQ40 occupies significantly less factory floor area than many equivalent-capacity machines, enabling higher equipment density in existing production spaces.
Zero Flash, Zero Scrap
The three-station simultaneous injection-blow-strip cycle produces no parting-line flash and zero trim waste, reducing material cost per bottle and eliminating the need for downstream flash removal equipment.
Precise Neck Finish
Up to 9 cavities at 10 ml with accurate neck-finish geometry delivering reliable cap seal engagement — critical for pharmaceutical packaging where closure torque specifications are tightly controlled.
Key Components and Supplier Origins
The EP-ZQ40 is assembled with internationally sourced components validated across thousands of production hours. Critical sealing, hydraulic and electronic parts are sourced from established European and Taiwanese suppliers.
| No. | عنصر | Supplier | Origin |
|---|---|---|---|
| 1 | Computer | Hongxun | Taiwan |
| 2 | Oil Pump Servo Driver | Hongxun | Taiwan |
| 3 | Servo Motor | Fisi | Italy |
| 4 | Oil Pump | Ekor | Germany |
| 5 | Hydraulic Valve | Oil Research | Taiwan |
| 6 | Five-Star Motor | Staver (Haitian) | China |
| 7 | Electronic Ruler | Gefran | Italy |
| 8 | A.C. Contactor | Schneider | France |
| 9 | Heating Relay | YANMING | Taiwan |
| 10 | O-Type Ring | HALLITE | England |
| 11 | Seal Ring | HALLITE | England |
| 12 | Travel Switch | YANMING | Taiwan |
| 13 | Air Switch | Schneider | France |
| 14 | Oil Pipe | ISR | USA |
| 15 | Air Valve | Festo | Germany |
| 16 | Servo Rotary Motor | Huichuan | China |
| 17 | PCS Carton | Mecano | China |
Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.
Compatible Materials and Industry Applications
The EP-ZQ40 processes a broad range of thermoplastics from 1 ml to 1500 ml, making it suitable across pharmaceutical, cosmetic, food and chemical packaging sectors.
Processable Materials
البولي إيثيلين منخفض الكثافة
PP
PS
ABS
EVA
PCTG
PLA (Bio)
المستحضرات الصيدلانية
Syrup bottles, eye drops, tablet containers, nasal spray flasks
Cosmetic
Lotion bottles, serum vials, shampoo containers, toner flasks
Food and Beverage
Sauce bottles, oil containers, supplement packaging, dairy caps
Chemical and Daily Care
Cleaning agents, personal care, laboratory reagent containers
Mold Design and Tooling
Ever Power manufactures its own ZQ-series injection blow molds machined from imported S136 high-strength alloy steel or 4Cr13 stainless steel. Mold cavities, neck blocks and runner systems are individually designed to each bottle geometry, ensuring gram-weight deviation and wall-thickness deviation are minimised from the first production run.
Steel Grade
4Cr13 stainless or imported S136 alloy. Blow molds may use magnesium-aluminium alloy for superior thermal conductivity and faster cycle times.
Hot Runner System
Optimised hot runner and preform design minimises gram-weight and wall-thickness deviation. Unique mandrel structure enables rapid cycle times with effective internal cooling.
Zero Waste Output
No flash on bottle mouth or base. Product dimensions, weight and wall thickness consistent across all cavities. No downstream regrind equipment required.
Production Line Integration
The EP-ZQ40 integrates with a complete downstream production line covering filling, labelling, inspection and packing. Ever Power provides whole-line turnkey solutions from raw material feeding to finished carton output. For the full IBM machine range see the IBM machines overview.
Air Compressor
Mold Temperature Controller
Chiller
آلة التعبئة والتغليف
آلة الفحص البصري للزجاجات
Auto Loader
الأسئلة الشائعة
Related IBM Machines
Sourcing an alternative to the Jomar IBM40?
Get in touch with our team for a detailed specification sheet and competitive quote.
