説明
European-Style Injection Blow Molding — 40 Tonne Class
Compact High-Precision IBM Machine for Pharmaceutical and Cosmetic Packaging
An independently engineered machine in the same tonnage class as the Jomar IBM40 — cited here only to help buyers compare specifications — delivering higher clamping force and lower energy use through full European-style architecture.
EP-ZQ40 vs Jomar IBM40 — Specification Comparison
Buyers evaluating 40-tonne class IBM machines frequently compare the Jomar IBM40 against alternatives from multiple manufacturers. The table below sets key parameters side by side for direct technical assessment. Jomar IBM40 figures are drawn from publicly available data. Jomar is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parameter | Jomar IBM40 | Ever Power EP-ZQ40 |
|---|---|---|
| Injection Clamping Force | 340 kN | 400 kN |
| Screw Diameter | 35/40 mm | 40/45 mm |
| Injection Weight | 180 g | 190/260 g |
| Max Cavities — 10 ml | — | 9 |
| Max Cavities — 100 ml | — | 4 |
| Machine Dimensions (L x W x H) | 2.72 x 1.9 x 2.75 m | 3.5 x 1.3 x 1.7 m |
| Dry Cycle | — | 3.5 s |
| Total Power | — | 20 kW |
Jomar IBM40 reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ40 Full Technical Specifications
The EP-ZQ40 is the entry-level model in the Ever Power ZQ series. Designed for small-to-medium pharmaceutical and cosmetic bottle production, its 400 kN injection clamping force, 40/45 mm twin screw options and 3.5-second dry cycle deliver strong output within a compact 3.5 x 1.3 m floor area. Full specifications are grouped below by system.
Injection System
| Parameter | Unit | EP-ZQ40 |
|---|---|---|
| Screw Diameter | mm | 40 / 45 |
| Screw L/D Ratio | — | 22:1 |
| Injection Weight | g | 190 / 260 |
| Heating Power | kW | 7.5 |
| Number of Barrel Zones | — | 3+N |
| Injection Stroke | mm | 120 |
Clamping System
| Parameter | Unit | EP-ZQ40 |
|---|---|---|
| Injection Clamping Force | kN | 400 |
| Injection Opening Stroke | mm | 165 |
| Blow Clamping Force | kN | 60 |
| Blow Opening Stroke | mm | 140 |
| Rotary Table Lift Height | mm | 70 |
Mould
| Parameter | Unit | EP-ZQ40 |
|---|---|---|
| Max Platen Size (L x W) | mm | 480 x 340 |
| Mold Thickness | mm | 180 |
| Max Bottle Diameter | mm | 120 |
| Max Bottle Height | mm | 220 |
| Max Bottle Volume | ml | 1 to 1500 |
| Stripping Stroke | mm | 220 |
Hydraulic System and Utilities
| Parameter | Unit | EP-ZQ40 |
|---|---|---|
| Hydraulic Pressure | MPa | 14 |
| モーター出力 | kW | 11 |
| Dry Cycle | s | 3.5 |
| Total Power | kW | 20 |
| Operating Power Ratio | % | 52 to 70 |
| Min Air Pressure | MPa | 0.7 to 1.2 |
| Compressed Air Capacity | m3/min | 0.7 |
| Cooling Water Flow | m3/h | 3.5 |
| Cooling Water Pressure | MPa | 0.3 to 0.4 |
| Machine Dimensions (L x W x H) | m | 3.5 x 1.3 x 1.7 |
| Net Weight | ton | 3.8 |
Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.
Cavity Configuration Guide
Cavity count is determined by bottle volume and mold design. At 10 ml, up to 9 cavities per cycle suit high-output pharmaceutical vial production. At 500 ml, 2 cavities per cycle match mid-volume cosmetic lotion bottle lines.
| Volume | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
|---|---|---|---|---|---|---|---|
| Max Cavities | 9 | 8 | 6 | 4 | 3 | 2 | 1 |
For reference only. Actual cavity count depends on mold design and bottle geometry.
Key Engineering Features
Full European-Style Structure
The all-European clamping architecture delivers 20 to 30% higher clamping force than comparable machines in the same tonnage class, providing greater preform stability and dimensional consistency across all cavities.
Standard Servo Rotary Drive
Servo-driven rotation comes as standard equipment, simplifying the mechanical structure, reducing operator setup time and eliminating the maintenance overhead of hydraulic rotary systems.
Pressurized Clamping System
The booster cylinder operates independently from mold-open and mold-close actions, reducing energy consumption by 10 to 20% compared with conventional single-circuit hydraulic clamping designs.
Compact Floor Footprint
At 3.5 x 1.3 x 1.7 m, the EP-ZQ40 occupies significantly less factory floor area than many equivalent-capacity machines, enabling higher equipment density in existing production spaces.
Zero Flash, Zero Scrap
The three-station simultaneous injection-blow-strip cycle produces no parting-line flash and zero trim waste, reducing material cost per bottle and eliminating the need for downstream flash removal equipment.
Precise Neck Finish
Up to 9 cavities at 10 ml with accurate neck-finish geometry delivering reliable cap seal engagement — critical for pharmaceutical packaging where closure torque specifications are tightly controlled.
Key Components and Supplier Origins
The EP-ZQ40 is assembled with internationally sourced components validated across thousands of production hours. Critical sealing, hydraulic and electronic parts are sourced from established European and Taiwanese suppliers.
| No. | Component | Supplier | Origin |
|---|---|---|---|
| 1 | Computer | Hongxun | Taiwan |
| 2 | Oil Pump Servo Driver | Hongxun | Taiwan |
| 3 | Servo Motor | Fisi | Italy |
| 4 | Oil Pump | Ekor | Germany |
| 5 | Hydraulic Valve | Oil Research | Taiwan |
| 6 | Five-Star Motor | Staver (Haitian) | China |
| 7 | Electronic Ruler | Gefran | Italy |
| 8 | A.C. Contactor | Schneider | France |
| 9 | Heating Relay | YANMING | Taiwan |
| 10 | O-Type Ring | HALLITE | England |
| 11 | Seal Ring | HALLITE | England |
| 12 | Travel Switch | YANMING | Taiwan |
| 13 | Air Switch | Schneider | France |
| 14 | Oil Pipe | ISR | USA |
| 15 | Air Valve | Festo | Germany |
| 16 | Servo Rotary Motor | Huichuan | China |
| 17 | PCS Carton | Mecano | China |
Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.
Compatible Materials and Industry Applications
The EP-ZQ40 processes a broad range of thermoplastics from 1 ml to 1500 ml, making it suitable across pharmaceutical, cosmetic, food and chemical packaging sectors.
Processable Materials
LDPE
PP
PS
ABS
EVA
PCTG
PLA (Bio)
Pharmaceutical
Syrup bottles, eye drops, tablet containers, nasal spray flasks
Cosmetic
Lotion bottles, serum vials, shampoo containers, toner flasks
Food and Beverage
Sauce bottles, oil containers, supplement packaging, dairy caps
Chemical and Daily Care
Cleaning agents, personal care, laboratory reagent containers
Mold Design and Tooling
Ever Power manufactures its own ZQ-series injection blow molds machined from imported S136 high-strength alloy steel or 4Cr13 stainless steel. Mold cavities, neck blocks and runner systems are individually designed to each bottle geometry, ensuring gram-weight deviation and wall-thickness deviation are minimised from the first production run.
Steel Grade
4Cr13 stainless or imported S136 alloy. Blow molds may use magnesium-aluminium alloy for superior thermal conductivity and faster cycle times.
Hot Runner System
Optimised hot runner and preform design minimises gram-weight and wall-thickness deviation. Unique mandrel structure enables rapid cycle times with effective internal cooling.
Zero Waste Output
No flash on bottle mouth or base. Product dimensions, weight and wall thickness consistent across all cavities. No downstream regrind equipment required.
Production Line Integration
The EP-ZQ40 integrates with a complete downstream production line covering filling, labelling, inspection and packing. Ever Power provides whole-line turnkey solutions from raw material feeding to finished carton output. For the full IBM machine range see the IBM machines overview.
Air Compressor
Mold Temperature Controller
Chiller
Packing Machine
Bottle Visual Inspection Machine
Auto Loader
Frequently Asked Questions
Related IBM Machines
Sourcing an alternative to the Jomar IBM40?
Get in touch with our team for a detailed specification sheet and competitive quote.
