Descripción
European-Style Injection Blow Molding — 60 Tonne Class
High-Cavity IBM Machine for Mid-Volume Cosmetic, Pharmaceutical and Food Packaging
The EP-ZQ60 sits in the same tonnage class as the Jomar IBM65 — cited here only to help buyers compare specifications — offering engineers a directly comparable machine with up to 14 cavities at 10 ml and a 1 ml to 2000 ml volume range.
EP-ZQ60 vs Jomar IBM65 — Side-by-Side Specification Review
Engineers shortlisting 60-tonne class IBM machines frequently compare the Jomar IBM65 alongside alternatives from multiple manufacturers. The table below presents key specifications in parallel for direct technical assessment. Jomar IBM65 figures are drawn from publicly available data. Jomar is referenced solely to assist buyers in equipment comparison and is not affiliated with Ever Power.
| Parámetro | Jomar IBM65 | Ever Power EP-ZQ60 |
|---|---|---|
| Injection Clamping Force | 460 kN | 600 kN |
| Diámetro del tornillo | 45 mm | 45/50 mm |
| Peso de inyección | 205 g | 260/383 g |
| Max Cavities — 10 ml | — | 14 |
| Max Cavities — 100 ml | — | 8 |
| Machine Dimensions (L x W x H) | 2.92 x 1.98 x 3.41 m | 3.8 x 1.4 x 1.8 m |
| Dry Cycle | — | 4 s |
| Potencia total | — | 37 kW |
Jomar IBM65 reference figures sourced from publicly available specification data. Jomar is cited only to assist buyers in equipment comparison and is not affiliated with Ever Power.
EP-ZQ60 Full Technical Specifications
The EP-ZQ60 is the mid-range model in the Ever Power ZQ series. With 45/50 mm twin screw options and 600 kN injection clamping force, it handles larger preform weights and higher cavity counts than the ZQ40, making it the preferred configuration for mid-volume cosmetic and pharmaceutical packaging lines producing bottles in the 30 to 500 ml range. See the full range on the IBM machines overview.
Injection System
| Parámetro | Unit | EP-ZQ60 |
|---|---|---|
| Diámetro del tornillo | mm | 45 / 50 |
| Screw L/D Ratio | — | 22:1 |
| Peso de inyección | g | 260 / 383 |
| Heating Power | kW | 14 |
| Number of Barrel Zones | — | 3+N |
| Injection Stroke | mm | 160 |
Clamping System
| Parámetro | Unit | EP-ZQ60 |
|---|---|---|
| Injection Clamping Force | kN | 600 |
| Injection Opening Stroke | mm | 140 |
| Fuerza de sujeción por golpe | kN | 100 |
| Blow Opening Stroke | mm | 140 |
| Rotary Table Lift Height | mm | 70 |
Mould
| Parámetro | Unit | EP-ZQ60 |
|---|---|---|
| Max Platen Size (L x W) | mm | 600 x 390 |
| Mold Thickness | mm | 240 |
| Max Bottle Diameter | mm | 120 |
| Max Bottle Height | mm | 220 |
| Max Bottle Volume | ml | 1 to 2000 |
| Stripping Stroke | mm | 230 |
Hydraulic System and Utilities
| Parámetro | Unit | EP-ZQ60 |
|---|---|---|
| Hydraulic Pressure | MPa | 14 |
| Motor Power | kW | 18.5 / 22 |
| Dry Cycle | s | 4 |
| Potencia total | kW | 37 |
| Operating Power Ratio | % | 52 to 70 |
| Min Air Pressure | MPa | 0.7 to 1.2 |
| Compressed Air Capacity | m3/min | 0.7 |
| Cooling Water Flow | m3/h | 4 |
| Cooling Water Pressure | MPa | 0.3 to 0.4 |
| Machine Dimensions (L x W x H) | m | 3.8 x 1.4 x 1.8 |
| Net Weight | ton | 5 |
Parameters are for reference only. Ever Power reserves the right to modify specifications without prior notice.
Cavity Output by Bottle Volume
The EP-ZQ60 provides substantially higher cavity counts than the ZQ40 across all volume ranges. At 30 ml it accommodates 12 cavities, suited to high-output pharmaceutical syrup lines. At 500 ml, 3 cavities per cycle support efficient mid-volume shampoo and lotion bottle production.
| Volume | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
|---|---|---|---|---|---|---|---|
| Max Cavities | 14 | 12 | 10 | 8 | 5 | 3 | 2 |
For reference only. Actual cavity count depends on mold design and bottle geometry.
Engineering Features of the EP-ZQ60
600 kN Injection Clamping Force
At 600 kN the EP-ZQ60 provides approximately 30% more injection clamping force than the Jomar IBM65 class, enabling higher cavity counts and tighter preform tolerances across a wider range of bottle neck diameters.
Twin Screw Options: 45 mm and 50 mm
Both 45 mm and 50 mm screw diameters are available, giving process engineers the flexibility to optimise plasticising capacity for different resin grades from standard HDPE to high-viscosity PCTG.
Low-Profile Height at 1.8 m
Standing just 1.8 m tall, the EP-ZQ60 fits comfortably in standard factory ceiling heights and clean-room environments, requiring no structural modifications or raised floor sections.
Energy-Saving Servo Hydraulics
The pressurized clamping design keeps the booster cylinder out of the open-close action, reducing the hydraulic circuit duty cycle and bringing actual operating power consumption to 52 to 70% of installed capacity.
Extended Volume Range to 2000 ml
The ZQ60 extends maximum bottle volume to 2000 ml compared with 1500 ml on the ZQ40, opening the machine to larger household, industrial and food-service container formats.
Uniform Wall, No Seam Line
Injection blow molding produces uniform wall thickness without a parting seam, making the EP-ZQ60 particularly suited to clear high-transparency PCTG and PS cosmetic packaging where visual clarity is a primary specification.
Internationally Sourced Components
Component selection for the EP-ZQ60 follows the same supply chain standards as the full ZQ series. Hydraulic seals from England, air valves from Germany and position sensors from Italy are combined with Taiwanese control hardware to deliver long-term reliability in demanding production environments.
| No. | Component | Supplier | Origin |
|---|---|---|---|
| 1 | Computer | Hongxun | Taiwán |
| 2 | Servocontrolador de la bomba de aceite | Hongxun | Taiwán |
| 3 | Servomotor | Fisi | Italia |
| 4 | Bomba de aceite | Ekor | Alemania |
| 5 | Válvula hidráulica | Investigación petrolera | Taiwán |
| 6 | Motor de cinco estrellas | Staver (haitiano) | Porcelana |
| 7 | Regla electrónica | Gefran | Italia |
| 8 | Contactor de CA | Schneider | Francia |
| 9 | Relé de calefacción | YANMIN | Taiwán |
| 10 | Anillo tipo O | HALLITA | Inglaterra |
| 11 | Anillo de sellado | HALLITA | Inglaterra |
| 12 | Interruptor de viaje | YANMIN | Taiwán |
| 13 | Interruptor de aire | Schneider | Francia |
| 14 | Oleoducto | ISR | EE.UU |
| 15 | Válvula de aire | Festo | Alemania |
| 16 | Motor rotativo servo | Huichuan | Porcelana |
| 17 | Caja de cartón PCS | Mecano | Porcelana |
Component suppliers may be substituted with equivalent or superior alternatives subject to availability without prior notice.
Material Compatibility and Target Applications
With a volume range from 1 ml to 2000 ml, the EP-ZQ60 serves a broader application range than the ZQ40. High-clarity PCTG and transparent PS make it particularly attractive for premium cosmetic and nutraceutical packaging, while HDPE and PP remain primary materials for pharmaceutical and food-contact applications.
Processable Materials
LDPE
PP
PS
ABS
EVA
PCTG
PLA (Bio)
Cosmetic Packaging
Serum vials, lotion bottles, essence containers, toner dispensers, transparent display packaging
Farmacéutico
Syrup bottles, oral liquid containers, vitamin supplement jars, nasal wash bottles
Food and Nutrition
Protein powder containers, condiment bottles, honey jars, infant nutrition packaging
Daily Chemical
Shampoo, body wash, hand sanitiser, household cleaning product containers
Mold Design for the EP-ZQ60
Ever Power designs and manufactures ZQ60-compatible molds in-house. The injection mold body is machined from 4Cr13 stainless steel and the blow mold body from imported S136 alloy or magnesium-aluminium alloy. The wider 600 x 390 mm platen accommodates multi-cavity arrangements for 30 to 100 ml bottles not achievable on smaller machines.
Wider Platen, More Cavities
The 600 x 390 mm max platen allows up to 10 cavities at 60 ml, nearly double that achievable on the 480 x 340 mm platen of the ZQ40.
Hot Runner for Sensitive Resins
Each hot runner is sized to minimise residence time for heat-sensitive materials such as PLA and transparent PS, reducing colour shift and maintaining optical clarity in finished bottles.
Zero Scrap Production
No gate mark, no parting flash and no runner to regrind. Material utilisation approaches 100%, lowering per-unit resin cost for expensive engineering-grade polymers.
Production Line Configuration
The EP-ZQ60 is designed to serve as the central unit in a complete bottle production line. Standard configurations include upstream material drying and conveying, and downstream labelling, filling, capping and final packaging. Ever Power provides complete turnkey line proposals on request.
Air Compressor
Mold Temperature Controller
Chiller
Máquina de embalaje
Máquina de inspección visual de botellas
Cargador automático
Technical Questions — EP-ZQ60
Other IBM Machines in the EP-ZQ Series
Considering options beyond the Jomar IBM65?
Get in touch with our team for a detailed specification sheet and competitive quote.
